ACCESSORIES

Transparent bath tank up to +100°C for CORIO C and CORIO CD heating immersion circulators. Image(s) are representative of the product group and not necessarily the individual product.Capacity (L): 5Capacity (L): 9Capacity (L): 19Capacity (L): 27

USB Cable 2m, Type A-B This accessory is suitable for:CORIO CD, CORIO CD-1000F, CORIO CD-1001F, CORIO CD-200F, CORIO CD-201F, CORIO CD-300F, CORIO CD-600F, CORIO CD-601F, CORIO CD-900F, CORIO CD-B13, CORIO CD-B17, CORIO CD-B19, CORIO CD-B27, CORIO...

The USB Interface Adapter Cable (2.5 m) allows to connect JULABO instruments with RS232 interface to a PC with USB port. Included in delivery: USB Interface Cable RS232 9 pin USB Typ A, CD with driver software for Microsoft Windows 98/2000/ME/XP...

PRESTO® systems are designed for precise temperature control as well as rapid temperature changes, making them ideal for reactor vessels, material stress tests, or temperature simulations. These instruments cover a working temperature of -92 to...

16 gallon Duran Bath tank, to 100°C. Image(s) are representative of the product group and not necessarily the individual product.

250 mL/6 mm Modular Block.Image(s) are representative of the product group and not necessarily the individual product.

Stainless Steel Shot for Sand Baths, 0.5 kg (1 lb).Image(s) are representative of the product group and not necessarily the individual product.

Sand for Stainless Steel Sand Baths, 0.5 kg (1 lb) Bag.Image(s) are representative of the product group and not necessarily the individual product.

Ideal for irregular vessels. Stainless steel construction for superior corrosion resistance. Designed to hold sand (Cat. No. 369-10631), stainless steel shot (Cat. No. 369-10634), or non-volatile fluids.Image(s) are representative of the product group...

For use as a low-temperature hot plate, slide drying, or for custom drilling to make a custom block. Modular Blocks are constructed from a solid anodized aluminum block, this material is ideal for its temperature conducting and corrosion resistant...

For use as a low-temperature hot plate, slide drying, or for custom drilling to make a custom block. Modular Blocks are constructed from a solid anodized aluminum block, this material is ideal for its temperature conducting and corrosion resistant...

Two parallel slots fit 6 cuvettes in each slot, side-by-side. Modular Blocks are constructed from a solid anodized aluminum block, this material is ideal for its temperature conducting and corrosion resistant properties. The close contact of tubes to...

Tapered tube wells for 0.2 mL tubes. Spaced for easy access and removal. Modular Blocks are constructed from a solid anodized aluminum block, this material is ideal for its temperature conducting and corrosion resistant properties. The close contact of...

Tapered tube wells for 0.2 mL tubes. Spaced for easy access and removal. Modular Blocks are constructed from a solid anodized aluminum block, this material is ideal for its temperature conducting and corrosion resistant properties. The close contact of...

Tapered tube wells for 0.2 mL tubes. Spaced for easy access and removal. Modular Blocks are constructed from a solid anodized aluminum block, this material is ideal for its temperature conducting and corrosion resistant properties. The close contact of...

Modular Blocks are constructed from a solid anodized aluminum block, this material is ideal for its temperature conducting and corrosion resistant properties. The close contact of tubes to block walls allow for maximum temperature transfer. Each block...

Modular Blocks are constructed from a solid anodized aluminum block, this material is ideal for its temperature conducting and corrosion resistant properties. The close contact of tubes to block walls allow for maximum temperature transfer. Each block...

Double block fits 2/4/6 block Dry Block Heaters. Ideal for 96-well or 384-well titer plates. Recessed well for better stability, flat surface good for flat and round bottom plates. Modular Blocks are constructed from a solid anodized aluminum block, this...

Enables the unit to read actual block or sample temperature and display that temperature on the control panel. The optional External Temperature Probe Kit includes a stainless steel RTD PT100 probe, 18 in. (45.7 cm) stainless steel support rod,...

This block has been designed for variable sized samples. Modular Blocks are constructed from a solid anodized aluminum block, this material is ideal for its temperature conducting and corrosion resistant properties. The close contact of tubes to block...

Plexiglass cover reduces air flow for additional temperature stability in low temperature applications. Two sides are open 0.25 in. (6.4 mm).Image(s) are representative of the product group and not necessarily the individual product.For Heater Capacity:...

Stainless steel hygiene insert for use with PURA 4 Water Baths.Image(s) are representative of the product group and not necessarily the individual product.

Test tube racks made out of high grade plastic can withstand temperatures up to +100°C.Image(s) are representative of the product group and not necessarily the individual product.No. of Places: 21Tube Size (mm): 30No. of Places: 60Tube Size (mm): 100...

The hollow balls are intended to cover open water baths, if mounting a fix cover is not possible or disturbing. The balls are simply put into the bath where they align to an even layer. The water surface should be covered completely. The balls reduce:...

Stainless steel stents lifter for use with PURA 4 Water Baths.Image(s) are representative of the product group and not necessarily the individual product.

Flat bath covers for PURA Water Baths. Supplied with appropriate set of rings. Image(s) are representative of the product group and not necessarily the individual product.No. of Openings: 1Opening Diameter (mm): 190No. of Openings: 2Opening Diameter...

Electronic module with one input and two outputs for external programming or flow sensor or temperature recorder (current/voltage), scalable as well as Standby input and Alarm output. Available as option or to retrofit for circulators of the HighTech...

Platform insert for Thermo Scientific Barnstead Reciprocating Water Bath ShakersPlatform insert and one or more flask clamps are required to hold flasks in placeGable cover extends temperature range to 98°CImage(s) are representative of the product...

40 x 0.5 mL diameter block for use with Thermo Scientific Digital and Touch Screen Dry Baths/Block Heaters.Image(s) are representative of the product group and not necessarily the individual product.Block Dimensions W x D x H, in. (mm): 4.9 x 3 x 1.5...

(Stakei to potential free change over contact) Input signal: Stakei connector with 0.5 m connection cable (200/230V, 50/60 Hz) Output signal: potential free change over contact, 3-pin. This accessory is suitable for:FC1600, FC1600S, FC1600T, FC600S,...

External Pt100 sensor, 300 x 6 mm, PTFE-coated stainless steel, 3 m cable. Usable for working temperatures from -75 to 250°C. Without handle. This accessory is suitable for:CF31, CF41, F25-HE, F25-HL, F25-ME, F26-ME, F32-HE, F32-HL, F32-ME, F33-HL,...

External Pt100 sensor, 600 x 6 mm, PTFE-coated stainless steel, 3 m cable. This accessory is suitable for:CF31, CF41, F25-HL, F25-ME, F26-ME, F32-HE, F32-HL, F32-ME, F33-HL, F33-ME, F34-HE, F34-ME, F95-SL, FP35-HL, FP40-HE, FP40-HL, FP40-ME, FP45-HE,...

External Pt100 sensor, 900 x 6 mm, PTFE-coated stainless steel, 3 m cable. Usable for working temperatures from -75 to 250°C. Without handle. This accessory is suitable for:CF31, CF41, F25-HE, F25-HL, F25-ME, F26-ME, F32-HE, F32-HL, F32-ME, F33-HL,...

External Pt100 sensor 200 x 6 mm, PTFE-coated stainless steel, 3 m cable. Usable for working temperatures from -75 to 250°C. Without handle. This accessory is suitable for:CF31, CF41, F25-HE, F25-HL, F25-ME, F26-ME, F32-HE, F32-HL, F32-ME, F33-HL,...

External Pt100 sensor, 1200 x 6 mm, PTFE-coated stainless steel, 3 m cable. This accessory is suitable for:CF31, CF41, F25-HE, F25-HL, F25-ME, F26-ME, F32-HE, F32-HL, F32-ME, F33-HL, F33-ME, F34-HE, F34-ME, F95-SL, FP35-HL, FP40-HE, FP40-HL, FP40-ME,...

M+R in-line Pt100 sensor, 2 fittings M24 x 1.5 male, 1.5 m cable. This accessory is suitable for:PRESTO A30, PRESTO A40, PRESTO A45, PRESTO A45t, PRESTO A80, PRESTO A80t, PRESTO A85, PRESTO A85t, PRESTO W40, PRESTO W50, PRESTO W50t, PRESTO W80, PRESTO...

Module with Pt100 interface socket for 2 external Pt 100 sensors. This accessory is suitable for:PRESTO A40, PRESTO A45, PRESTO A45t, PRESTO A80, PRESTO A80t, PRESTO A85, PRESTO A85t, PRESTO W40, PRESTO W50, PRESTO W50t, PRESTO W80, PRESTO W80t, PRESTO...

Silicone tubing for temperatures between -50 and 180°C. Sold by the meter. Not to be used with silicone bath fluids.Image(s) are representative of the product group and not necessarily the individual product.I.D. (mm): 8O.D. (mm): 10I.D. (mm): 12O.D...

PTFE tubing for temperatures between -60 and 180°C. Sold by the meter.Image(s) are representative of the product group and not necessarily the individual product.I.D. (mm): 8O.D. (mm): 10I.D. (mm): 12O.D. (mm): 14

Precision reference sensor with integrated measuring electronics and RS232 connection for direct use with all JULABO calibration baths. Specifications:• Measuring range -40.00 to 300°C• Dimensions: 180 x 4 mm• 1 m cable•...