FUME HOOD ACCESSORIES
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
Labconco* Logic Cart - Each
$972.40Logic Cart, specifically designed to provide convenient storage of supplies commonly used in biological safety cabinets. Its compact size allows it to fit easily under Purifier Logic Class II Biosafety Cabinets, Purifier Axiom Biosafety Cabinets, and...496-50728$972.40 -
Labconco* Manual Duct Dampers
$461.10This damper fitting allows you to balance airflow. It may be used with exhaust and auxiliary-air ducts, and is usually directly above the fume hood.Image(s) are representative of the product group and not necessarily the individual product.PVCDuct...346-14953$461.10 -
Labconco* Manual Hydraulic Lift Base Stands
$2,584.40These stands have a built-in hydraulic lift so that height may be adjusted at any time. Includes a front-accessible hand crank. Turning the crank clockwise raises the stand; counterclockwise lowers it. The handle may be disengaged and folded under, out...496-27869$2,584.40 -
Labconco* Neutrodine* Carbon Filter - Each
$1,159.60The Labconco Protector Echo Filtered Hood operates with one comprehensive Neurtrodine carbon filter to take the guesswork out of carbon filter choices, allowing simultaneous handling of solvents, acids, and bases with one filters.Image(s) are...496-50212$1,159.60 -
Labconco* Non-Welded Telescoping Base Stands
$712.40Telescoping Base Stand with rugged powder coated tube and steel construction. NSF-Approved (meet NSF Standard for stability and construction). Support loads up to 1,000 pounds. ADA-compliant. Durable 1.75 in. tubular, powder-coated steel frame with back...496-49423$712.40 -
Labconco* Paramount Filters and Prefilters
$43.40Carbon-based and HEPA filters used in a variety of Labconco enclosures require periodic replacement. Select the right filters to fit your Labconco product.• Enclosure Nominal Width: 6• Filter Flow Type: ExhaustImage(s) are representative of...496-20500$43.40 -
Labconco* Pre-filters for Vertical ClEachn Benches
$28.65Corrugated paper pre-filters trap large particles to extend HEPA filter life. Labconco recommends replacing the pre-filter every three months.Image(s) are representative of the product group and not necessarily the individual product.For Use With: 2 ft...656-10013$28.65 -
Labconco* PVC Blowers
$5,132.40PVC Blowers provide optimum chemical resistance and are made specifically to handle extremely corrosive atmospheres produced by high order oxidizers such as perchloric acid. They are offered with capacities from 390 to 1900 CFM at static pressures up to...496-21304$5,132.40 -
Labconco* Rear Finish Panel for Protector* XL Fume Hoods
$847.60Labconco rear finish panel kits hides the hoods interior components. Recommended when hood is mounted on a casework island (and exposed on the back). Each kit includes a glacier white powder-coated steel panel to provide a finished appearance for the...496-50200$847.60 -
Labconco* Replacement Bag for Bag-in/Bag Out HEPA/ULPA Filters
$323.30Replacement Bag for Bag-in/Bag Out HEPA/ULPA Filters. Bag Set for Bag-in/Bag-out HEPA Filter Replacement includes two bags and two straps necessary for changing and disposing of one inlet or outlet filter.Applicable Products: XPert Bulk Powder Filtered...636-10010$323.30 -
Labconco* Replacement Pre-filters for Horizontal ClEachn Benches
$26.60• 3 ft. hoods require 2 pre-filters (2 x Cat. No. 346-14335)• 4 ft. hoods require 2 pre-filters (2 x Cat. No. 346-14344)• 5 ft. hoods require 3 pre-filters (2 x Cat. No. 346-14335 plus 1 x Cat. No. 346-14344)• 6 ft. hoods require...346-14335$26.60 -
Labconco* Replacement Prefilters for PuriCare* Procedure Stations
$182.30Washable/reusable, metal screen-type prefilter and hardware for replacement on the towel catch. One each. Installation is required.Image(s) are representative of the product group and not necessarily the individual product.Width (ft.): 3Width (ft.):...496-49447$182.30 -
Labconco* RS232 Connection Kits
$152.65For connecting the procedure station to a data recorder or building monitoring system. Include PC board, cable and hardware.Image(s) are representative of the product group and not necessarily the individual product.Connection: 9-PinConnection: 25-Pin496-49414$152.65 -
Labconco* Sash Stop Kit - Each
$68.00A Sash Stop restricts how far a vertical-rising sash may be opened. This small plastic device may be easily field installed on the fixture panel of many of our popular hoods. Protector XStream Hoods, Premier Hoods and 3 ft. to 12 ft. XL Hoods have been...496-48790$68.00 -
Labconco* Sash-Glider Kit
$102.60Use the Sash-Glider to clean both sides of the sash while it remains closed, to avoid contamination risks. Kit includes magnetic outside and inside blades, 2 microfiber sheets, and 10 disposable scrubbing strips. Replacement Scrubbing Strips (Cat. No...496-50710$102.60 -
Labconco* Seismic Support Bracket Kit - Each
$289.40Seismic Brackets for securing a Telescoping Base Stand to the floor in earthquake-prone regions. Kit includes four stainless steel seismic brackets and hardware for attachment to the stand. Hardware to attach to the floor and installation required...496-48154$289.40 -
Labconco* Service Fixture Kit - Each
$122.95Includes serrated hose tip valve with ball valve, quarter turn control handle and hardware. Mounts on left or right side interior. Cabinets are factory-prepared for up to four fixtures: two forward mounted 8.5 in. above surface and two back mounted 10 in...496-15217$122.95 -
Labconco* Service Fixture Kit for Horizontal Clean Benches - Each
$183.40Service Fixture Kit, includes serrated hose tip valve with quarter turn control handle, hardware and instructions for plumbing to services. Up to two fixtures may be mounted on the right hand side of pre-March 2012 Purifier Horizontal Clean Benches...346-14356$183.40 -
Labconco* SoLo Hydraulic Lift Base Stands
$4,758.00SoLo Hydraulic Lift Base Stands are designed to support Purifier Logic, Logic+ and Axiom Biosafety Cabinets and Paramount Ductless Enclosures. The stand may be lowered to allow the cabinet or enclosure to be transported through standard doorways as low...496-48028$4,758.00 -
Labconco* Standard Service Fixture Kits
$275.60For mounting on the left or right side of a Protector Hood. Each kit includes one remotely-controlled service fixture with valve and 0.25 in. diameter tubing, color-coded fixture knob, and color-coded hose connector. Inlet tubing is not included...496-28370$275.60 -
Labconco* Support Shelf for Hydraulic Lift Stands - Each
$171.70Provides a 8 x 20 in. work surface to support remote equipment. Powder-coated steel shelf mounts to left-side tubular frame of base stand. Dimensions (W x D): 12 x 22 in. (26 x 30 cm). Installation is required. Not for use with SoLo Hydraulic Lift Base...496-50725$171.70 -
Labconco* T-Bolt Hose Clamps
$23.10Replacement T-Bolt Hose Clamps. 5 in. Dia., two are included with FilterMate Portable Exhauster. 6 in. Dia., two are included with Flexible Hose, Cat. No. 626-10065.Image(s) are representative of the product group and not necessarily the individual...626-10050$23.10 -
Labconco* Telescoping Base Stand with Casters
$1,008.80Telescoping Base Stands with Casters may be adjusted to eight height positions prior to installation. Telescoping legs are adjustable in 1 in. increments from 27.5 to 34.5 inches. Casters provide mobility for short distances, such as to gain access to...496-48022$1,008.80 -
Labconco* Telescoping Base Stands with Fixed Feet
$811.20Telescoping Base Stands with Fixed Feet may be adjusted to eight height positions prior to installation. Telescoping legs are adjustable in 1 in. increments from 27.5 to 34.5 in. Durable 1.75 in. tubular, epoxy-coated steel frame. Rear cross bar supports...496-15127$811.20 -
Labconco* Thermoplastic Duct Reducers
$275.60PVC coupling type reducers are designed for connecting thermoplastic duct of different diameters. Compare your blower inlet size with your duct size to see if one is necessary.Image(s) are representative of the product group and not necessarily the...346-16033$275.60 -
Labconco* Tissue Screen Kits
$93.95Screens that mount behind the baffles of a chemical fume hood for trapping tissue wipes and other small, loose materials which may be caught in the airflow. Each kit includes mounting hardware, powder-coated stainless steel screen and instructions...626-10008$93.95 -
Labconco* Turntable - Each
$168.55Lazy Susan rotates 360° to bring items within easy reach. Stainless steel surface and ball bearings. 12 in. (30 cm) diameter. Autoclavable.Applicable Products: Purifier Logic+ and Axiom Cabinets and PuriCare Procedure StationsImage(s) are...496-50716$168.55 -
Labconco* ULPA Exhaust Filters for Purifier Logic+ Cabinets
$1,034.80Replacement ULPA exhaust filters for Purifier Cell Logic & Cell Logic+ Biosafety Cabinets and Purifier Logic & Logic+ Biosafety Cabinets.Image(s) are representative of the product group and not necessarily the individual product.For Use With: 3 ft...496-50782$1,034.80 -
Labconco* Ultraviolet Lamp Kits
$252.30Includes a 254 nm UV lamp and ballast. Installation is required.Image(s) are representative of the product group and not necessarily the individual product.For Use With: 4 ft. modelsFor Use With: 6 ft. modelsFor Use With: 100V modelsFor Use With: 115V...496-50704$252.30 -
Labconco* Universal Tube Baths
$184.45Labconco Universal Tube BathsImage(s) are representative of the product group and not necessarily the individual product.Type: BathStyle: BeadSize: LargeCapacity (L): 0.25Type: BathStyle: BeadSize: SmallCapacity (L): 0.25Type: Lab ArmorStyle:...626-10176$184.45 -
Labconco* Utility Shelves - Each
$135.70Utility Shelves and Holders maximize the usable work surface within XPert Enclosures, Stations and Systems to make the workspace more efficient. Locate bottles, tissues and other items where they are needed.Utility Shelves: Three epoxy-coated steel...496-48160$135.70 -
Labconco* UV Screen Kits for Horizontal Clean Benches
$634.40UV Screen Kits for 3, 4 and 6 ft. Purifier Horizontal Clean BenchesImage(s) are representative of the product group and not necessarily the individual product.For Use With: 3 ft. modelsShipping Weight (lbs): 10For Use With: 4 ft. modelsShipping Weight...346-28190$634.40 -
Labconco* Vacu-Pass* Cord and Cable Port Kit
$203.50Allows passage of a cable through the right-side interior wall to the exterior. With 4 closed-cell neoprene plugs with holes for cords/cables with diameters of 1/8 in., 1/4 in., 3/8 in. and 1/2 in., and blank plug. NSF-approved port does not disrupt...496-49420$203.50 -
Labconco* Vibration Isolation Table - Each
$1,242.80Vibration Isolation Table for Horizontal Clean BenchesImage(s) are representative of the product group and not necessarily the individual product.346-13882$1,242.80 -
Labconco* XPert* TXE Telescoping Base Stand
$852.80Supports XPert TXE Equipment Enclosures. Powder-coated 1.75 in. tubular steel. Adjustable to eight height positions at installation in 1 in. increments from 27.5 in. to 34.5 in. Available with fixed feet or 5 in. diameter casters. Shipping weight 100 lbs...496-50893$852.80 -
Labconco® Canopy Connections for RxPert Double Filtered Balance Systems
$644.80Canopy Connections for RXPert™ Double Filtered Balance Systems allow thimble ducting to the outside for additional protection. The canopys air gap provides a means of balancing air by allowing room air to enter the ductwork and mix with the...496-50803$644.80 -
Labconco® Interior Shelf Kits for Protector® Acid Storage Cabinets
$243.80These shelf kits fit within Protector Acid Storage Cabinets to provide additional surfaces to hold supplies and small laboratory instruments. They include powder-coated steel shelf and mounting hardware. Shelf may be mounted at one of three heights: 13.0...346-10825$243.80 -
Labconco® PLEKX® Filters
$546.00The existing HEPA Filter(s) installed in the RXPert™ Filtered Balance System may be replaced by PLEKX® Filter(s)†. PLEKX® Filters are HEPA filters combined with an organic vapor carbon filter. The carbon allows for odor control of...496-50824$546.00 -
Labconco® Polypropylene Remote Blowers for XPert Stations
$3,759.60These direct-drive blowers are designed to handle the ventilation requirements of XPert Filtered Stations as well as other enclosures with high static pressure and low volume. Maximum 3600 RPM, 3 phase motor. Image(s) are representative of the product...496-50911$3,759.60 -
Labconco® Pure-Vu Punch Kit
$100.70For punching accurate eyepiece holes in blank Pure-Vu seals. Includes 1/2 in. (12.7 mm) diameter hole punch, template and instructions.Image(s) are representative of the product group and not necessarily the individual product.656-10154$100.70