FUME HOOD ACCESSORIES
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
Labconco® Interior Shelf Kits for Protector® Acid Storage Cabinets
$243.80These shelf kits fit within Protector Acid Storage Cabinets to provide additional surfaces to hold supplies and small laboratory instruments. They include powder-coated steel shelf and mounting hardware. Shelf may be mounted at one of three heights: 13.0...346-10825$243.80 -
Bel-Art Scienceware Draft Checker Airflow Detection Powder
$28.15A quick and easy way to test the safety of fume hood exhaust before use. Just a squeeze or two from the plastic bottle dispenses a cloud of ultra-fine, lightweight silica powder, which remains suspended long enough to visually check whether or not the...154-17137$28.15 -
Labonco* Exhaust Adapter for ClassMate Hoods - Each
$1,159.60Dual Exhaust Adapter, allows two hoods mounted back-to-back to be exhausted from a single 12 in. nominal diameter duct, 12 x 12 x 12 in.. This Type 304 stainless steel adapter allows two Protector ClassMate Hoods mounted back-to-back to be exhausted from...346-28655$1,159.60 -
Labconco® Pure-Vu Punch Kit
$100.70For punching accurate eyepiece holes in blank Pure-Vu seals. Includes 1/2 in. (12.7 mm) diameter hole punch, template and instructions.Image(s) are representative of the product group and not necessarily the individual product.656-10154$100.70 -
Labconco® Stand-Still Isolation Platforms for Cell Logic+ Class II Biosafety Cabinets
$249.10Stand-Still™ Isolation Platforms for Cell Logic+ Class II Biosafety Cabinets.Image(s) are representative of the product group and not necessarily the individual product.Dimensions (in.): 12 x 183/4Dimensions (in.): 14 x 223/4656-10178$249.10 -
Labconco® Pure-Vu SEachls for Cell Logic+ Class II Biosafety Cabinets
$67.25Pure-Vu Seals for Purifier Cell Logic & Cell Logic+ Biosafety Cabinets.Image(s) are representative of the product group and not necessarily the individual product.Size: BlankSize: Stereo-Scope BlankSize: 13Size: 14Size: 15Size: 16Size: Stereo-Scope...656-10151$67.25 -
Labconco* IV Bar Kits for Horizontal Clean Benches
$371.00Support intravenous solution bottles and bags. Each includes IV bar, mounting hardware, four hangers and instructions for installation. Three-foot, four-foot and five-foot Purifier Horizontal Clean Benches accommodate one IV bar. Six-foot and eight-foot...346-14188$371.00 -
Labconco* Vibration Isolation Table - Each
$1,242.80Vibration Isolation Table for Horizontal Clean BenchesImage(s) are representative of the product group and not necessarily the individual product.346-13882$1,242.80 -
Labconco® Polypropylene Remote Blowers for XPert Stations
$3,759.60These direct-drive blowers are designed to handle the ventilation requirements of XPert Filtered Stations as well as other enclosures with high static pressure and low volume. Maximum 3600 RPM, 3 phase motor. Image(s) are representative of the product...496-50911$3,759.60 -
Labconco* XPert* TXE Telescoping Base Stand
$852.80Supports XPert TXE Equipment Enclosures. Powder-coated 1.75 in. tubular steel. Adjustable to eight height positions at installation in 1 in. increments from 27.5 in. to 34.5 in. Available with fixed feet or 5 in. diameter casters. Shipping weight 100 lbs...496-50893$852.80 -
Labconco* Replacement Bag for Bag-in/Bag Out HEPA/ULPA Filters
$323.30Replacement Bag for Bag-in/Bag Out HEPA/ULPA Filters. Bag Set for Bag-in/Bag-out HEPA Filter Replacement includes two bags and two straps necessary for changing and disposing of one inlet or outlet filter.Applicable Products: XPert Bulk Powder Filtered...636-10010$323.30 -
Labconco® PLEKX® Filters
$546.00The existing HEPA Filter(s) installed in the RXPert™ Filtered Balance System may be replaced by PLEKX® Filter(s)†. PLEKX® Filters are HEPA filters combined with an organic vapor carbon filter. The carbon allows for odor control of...496-50824$546.00 -
Labconco® Waste Chute Bags - Each
$93.35Replacement bags for 5 ft. and 6 ft. RXPert™ Systems. Bags are 0.004 in. (4 mm) thick clear plastic.• Dimensions (W x L): 10 x 16 in. (25.4 x 40.6 cm)• Shipping weight 5 lbs (2.3 kg)Image(s) are representative of the product group and...496-50821$93.35 -
Labconco® Waste Chute Stopper - Each
$89.65For use with 5 ft. and 6 ft. RXPert™ Systems with 35.5 in. depth. When waste chute is not in use, the stopper helps prevent contaminants from escaping from the enclosure through the side wall. • Solid rubber• 5 in. diameter•...496-50818$89.65 -
Labconco® Canopy Connections for RxPert Double Filtered Balance Systems
$644.80Canopy Connections for RXPert™ Double Filtered Balance Systems allow thimble ducting to the outside for additional protection. The canopys air gap provides a means of balancing air by allowing room air to enter the ductwork and mix with the...496-50803$644.80 -
Labconco* Aluminum Tube Racks
$159.00Blue anodized aluminum blocks hold tubes upright and promote conduction of heat or cold from the Temp-Zone area on selected models of Purifier Cell Logic Biosafety Cabinets to help maintain sample temperature.Image(s) are representative of the product...626-10140$159.00 -
Labconco* Universal Tube Baths
$184.45Labconco Universal Tube BathsImage(s) are representative of the product group and not necessarily the individual product.Type: BathStyle: BeadSize: LargeCapacity (L): 0.25Type: BathStyle: BeadSize: SmallCapacity (L): 0.25Type: Lab ArmorStyle:...626-10176$184.45 -
Labconco* Guardian* Digital Airflow Monitors - Each
$2,501.20Guardian™ Digital Airflow Monitor senses and alerts the operator to low airflow conditions. LCD displays actual airflow in fpm or m/sec. Audible/visual alarm alerts the user to sustained low velocity condition. Calibration instructions displayed on...496-48799$2,501.20 -
Labconco* Guardian* Airflow Monitors - Each
$1,003.60Sense and alert the operator to low airflow conditions. From the monitors face plate, the user can easily select and calibrate a set point between 30 and 250 fpm using a velocity meter and a screwdriver. Audible/visual alarm. Includes night setback,...496-48793$1,003.60 -
Labconco* Sash Stop Kit - Each
$68.00A Sash Stop restricts how far a vertical-rising sash may be opened. This small plastic device may be easily field installed on the fixture panel of many of our popular hoods. Protector XStream Hoods, Premier Hoods and 3 ft. to 12 ft. XL Hoods have been...496-48790$68.00 -
Labconco* ULPA Exhaust Filters for Purifier Logic+ Cabinets
$1,034.80Replacement ULPA exhaust filters for Purifier Cell Logic & Cell Logic+ Biosafety Cabinets and Purifier Logic & Logic+ Biosafety Cabinets.Image(s) are representative of the product group and not necessarily the individual product.For Use With: 3 ft...496-50782$1,034.80 -
Labconco* Back Draft Damper - Each
$233.20Mounts in vertical duct run to prevent reverse pressurization of the exhaust system. 3.0 in. (8 cm) hgh with 10 in. (25.4 cm) O.D. inlet and outlet. Dampers adjust the biosafety cabinets exhaust airflow.Image(s) are representative of the product group...496-50773$233.20 -
Labconco* Laptop Computer Arms
$889.20For mounting to the front leg of the Telescoping Base Stand.Laptop Computer Arm securely supports a laptop computer within easy view of an operator at the Purifier Logic Biosafety Cabinet, Purifier Cell Logic Biosafety Cabinet or PuriCare Procedure...496-50767$889.20 -
Labconco* G4 Prefilter Starter Kits and Replacement Prefilters
$71.80Used with carbon-based and HEPA filters in a variety of Labconco enclosures which require periodic replacement.Image(s) are representative of the product group and not necessarily the individual product.Type: FilterStyle: ReplacementSize (ft.): 3Type:...496-49435$71.80 -
Labconco* Replacement Prefilters for PuriCare* Procedure Stations
$182.30Washable/reusable, metal screen-type prefilter and hardware for replacement on the towel catch. One each. Installation is required.Image(s) are representative of the product group and not necessarily the individual product.Width (ft.): 3Width (ft.):...496-49447$182.30 -
Labconco* RS232 Connection Kits
$152.65For connecting the procedure station to a data recorder or building monitoring system. Include PC board, cable and hardware.Image(s) are representative of the product group and not necessarily the individual product.Connection: 9-PinConnection: 25-Pin496-49414$152.65 -
Labconco* Manual Hydraulic Lift Base Stands
$2,584.40These stands have a built-in hydraulic lift so that height may be adjusted at any time. Includes a front-accessible hand crank. Turning the crank clockwise raises the stand; counterclockwise lowers it. The handle may be disengaged and folded under, out...496-27869$2,584.40 -
Labconco* Support Shelf for Hydraulic Lift Stands - Each
$171.70Provides a 8 x 20 in. work surface to support remote equipment. Powder-coated steel shelf mounts to left-side tubular frame of base stand. Dimensions (W x D): 12 x 22 in. (26 x 30 cm). Installation is required. Not for use with SoLo Hydraulic Lift Base...496-50725$171.70 -
Labconco* Cord Management System - Each
$124.00Includes three mounting stainless steel hooks and three carabiners. The hooks mount to the rear grille and the carabiners secure power cords and tubing along the rear wall to keep them contained and away from the work area.Applicable Products: PuriCare...496-50722$124.00 -
Labconco* Interior Shelf - Each
$75.90Stainless steel shelf mounts to rear grille and provides 8 x 5 in. surface to place supplies. Weight capacity of 2.2 lbs (1 kg).Applicable Products: PuriCare Procedure Stations (pre-2008), Purifier Cell Logic & Cell Logic+ Biosafety Cabinets,...496-50719$75.90 -
Labconco* Turntable - Each
$168.55Lazy Susan rotates 360° to bring items within easy reach. Stainless steel surface and ball bearings. 12 in. (30 cm) diameter. Autoclavable.Applicable Products: Purifier Logic+ and Axiom Cabinets and PuriCare Procedure StationsImage(s) are...496-50716$168.55 -
Labconco* Caster Kit for Telescoping Base Stands with Fixed Feet - Each
$434.60For converting Telescoping Base Stands with Fixed Feet to mobile stands. Kit includes four 5 in. diameter, non-marking polyurethane casters with toe locks. Load rating for each caster is 250 pounds. Casters have bearings for quiet operation, and replace...496-50713$434.60 -
Labconco* Sash-Glider Kit
$102.60Use the Sash-Glider to clean both sides of the sash while it remains closed, to avoid contamination risks. Kit includes magnetic outside and inside blades, 2 microfiber sheets, and 10 disposable scrubbing strips. Replacement Scrubbing Strips (Cat. No...496-50710$102.60 -
Labconco* Logic Cart - Each
$972.40Logic Cart, specifically designed to provide convenient storage of supplies commonly used in biological safety cabinets. Its compact size allows it to fit easily under Purifier Logic Class II Biosafety Cabinets, Purifier Axiom Biosafety Cabinets, and...496-50728$972.40 -
Labconco* Caster Kit for Hydraulic Lift Base Stands - Each
$166.40For converting Hydraulic Lift Stands (Cat. No. 496-27854, 496-27872, 496-27857, and 496-27875) to mobile stands. Includes four 5 in. (13 cm) diameter, non-marking polyurethane casters with toe locks and bearings. Load rating for each caster is 250 pounds...496-27911$166.40 -
Labconco* Non-Welded Telescoping Base Stands
$712.40Telescoping Base Stand with rugged powder coated tube and steel construction. NSF-Approved (meet NSF Standard for stability and construction). Support loads up to 1,000 pounds. ADA-compliant. Durable 1.75 in. tubular, powder-coated steel frame with back...496-49423$712.40 -
Labconco* 10 in. I.D. Flexible Hose Kits
$182.30Flexible Hose Kits for connection between the Air-Tight Damper (sold separately, Cat. No. 496-27848) and exhaust ductwork to limit vibration from the mechanical system. 10 in. nominal diameter. Include spiral flexible tubing and clamps.Image(s) are...346-16753$182.30 -
Labconco* 10 in. Airtight Damper - Each
$863.20Recommended for Axiom™ Class II, Type C1 Biosafety Cabinets. Mounts atop the duct collar to adjust exhaust airflow and closes for decontamination procedures. Manually adjustable. Type 304 stainless steel. 10 in. (25.4 cm) high with 10 in. (25.4 cm)...496-27848$863.20 -
Labconco* Ultraviolet Lamp Kits
$252.30Includes a 254 nm UV lamp and ballast. Installation is required.Image(s) are representative of the product group and not necessarily the individual product.For Use With: 4 ft. modelsFor Use With: 6 ft. modelsFor Use With: 100V modelsFor Use With: 115V...496-50704$252.30 -
Labconco* IV Bar Kits
$135.70Kit includes IV bar, mounting hardware and four hangers. Installation is required.Image(s) are representative of the product group and not necessarily the individual product.For Use With: 3 ft. modelsFor Use With: 4 ft. modelsFor Use With: 5 ft...336-27247$135.70