ACCESSORIES

The Micro-Mill II with stainless steel blade swiftly crushes 20 to 50 ml samples such as bauxite, limestone, bone, ceramics, pharmaceuticals and similar drier samples. Softer samples may be ground with dry ice. The rocker switch has two operating...

The BeadBug™ is a high energy benchtop homogenizer that sets the performance standard for personal sized cell disruption and lysis instruments. Simultaneous homogenization of up to 3 samples takes place (often within 45 seconds) inside the...

Empty microtubes for use with BeadBuster™ and BeadBug™ Microtube Homogenizers. Fill with bulk beads (sold separately).Image(s) are representative of the product group and not necessarily the individual product.

Prefilled tubes with Triple-Pure™ zirconium beads. Acid washed and processed to remove nucleases and proteases. The Triple-Pure bead tubes undergo special handling during filling and are quality tested to ensure the elimination of DNase, RNase,...

A variety of bulk beads are available including stainless steel, glass, and Triple-Pure™ zirconium beads. All three bead types are acid washed and processed to remove nucleases and proteases. The Triple-Pure bead tubes undergo special handling...

A variety of prefilled 2.0 mL tubes are available for homogenizing samples including glass, ceramic, or stainless steel. All bead types are acid washed and processed to remove nucleases and proteases. Bead beating is quickly becoming the preferred...

Grinding mill attachment for dry materials such as seeds, grains, plant fibers, pharmaceutical materials, etc. For use with BioMixer (Cat. No. 330-19588 and 330-19594).Image(s) are representative of the product group and not necessarily the individual...

Three stainless steel attachments (chopper, vortex mixer disc, perforated mixer) for any combination of mixing, emulsification, shredding, or chopping. For use with BioMixer (Cat. No. 330-19588 and 330-19594).Image(s) are representative of the product...

3-Bladed Propellers for use with EUROSTAR 20 high speed digital/control Overhead Stirrers (Cat. No. 340-98269 and 340-98530). 45 mm diameter propeller (Cat. No. 430-10076) also fits T 50 digital ULTRA-TURRAX Disperser (Cat. No. 340-98248)Image(s) are...

This batch mill grinds hard, brittle, soft and fibrous materials for volumes up to 50 mL. Because samples may be embrittled directly in the grinding chamber; tough, oily and aqueous samples can also be ground. The development of the mill placed...

Batch mill for 2 different grinding procedures:• Impact grinding of hard, brittle or non-elastic grinding materials with high-grade stainless steel beater which can be used for a Mohs hardness up to 6 (included with delivery)• Cutting...

5 mm stainless steel balls or 6 mm glass balls for BMT tubes.Image(s) are representative of the product group and not necessarily the individual product.

• For pulverizing substances with a Mohs hardness up to 9• Stainless steel coated with chromium carbide• Not included with the analytical mill A 11 basicImage(s) are representative of the product group and not necessarily the individual...

MBT-50-S-M-Gamma Tube for Grinding with Stainless Steel Balls, 15-50 mLImage(s) are representative of the product group and not necessarily the individual product.Glass BallsTube Capacity (mL): 2 to 15Stainless Steel BallsTube Capacity (mL): 2 to 15Glass...

• For pulverizing soft, fibrous grinding materials• Not included with the analytical mill A 11 basic• Material: stainless steel (AISI 440B) Image(s) are representative of the product group and not necessarily the individual product.

For wet crushing, suspension and emulsifying (batch-operation). Use to crush large pieces (up to 50 mm) of fibrous materials, such as vegetation, vegetables, and fruit. Material in contact with medium is PTFE and AISI 316L. Suitable for solvents and...

The variety of media to be processed also requires a variety of rotor-stator configurations and seals. In many cases it is necessary to use two dispersing elements subsequently, for pre-crushing and fine crushing. The quick-connect coupling facilitates...

The variety of media to be processed also requires a variety of rotor-stator configurations and seals. In many cases it is necessary to use subsequently two dispersing elements, for pre-crushing and fine crushing. The plug-in connectors facilitate the...

AISI 316L stainless steel dispersing tools with PTFE bearings for use with the T 50 Digital ULTRA-TURRAX. The variety of media to be processed also requires a variety of rotor-stator configurations and seals. In many cases it is necessary to use two...

50 mL polypropylene tube for attaching onto plastic tools from S 18 D and S 25 D series dispersing elements. Allows dispersing in a closed system (splash guard). Image(s) are representative of the product group and not necessarily the individual product.

• For use up to Mohs hardness 3• Only applicable with grinding chamber A 11.4• Not included with the analytical mill A 11 basic• Material: titanium, surface-hardenedImage(s) are representative of the product group and not...

IKA DT Tube with Rotor-Stator Element for ULTRA-TURRAX Tube DriveImage(s) are representative of the product group and not necessarily the individual product.

• Made of polycarbonate with stainless steel inlet (AlSl 316L)• Not suitable for cooling with N2, only applicable with double beater A 11.6• Not included with the analytical mill A 11 basic• Useful volume: 250 mLImage(s) are...

A second grinding chamber ensures effective processing. The grinding chambers can be placed on the drive alternately. One chamber is cleaned and filled while the other is being processed.Image(s) are representative of the product group and not...

• For hard materials up to Mohs hardness 9• Material tungsten carbide (86,5 WC 13,5 Col) Image(s) are representative of the product group and not necessarily the individual product.

• For shortening mixing and dissolving times• The vertical flow and the high circumferential speed up to 10,000 rpm ensure intensive mixing• The head is used for adding gases or liquids, for lump-free suspension of difficult to dissolve...

Batch mill suitable for dry grinding of hard and brittle substances up to 250 mL with a fixed speed of 20,000 rpm. Double-walled grinding chamber can be cooled with water through two hose adapters or with dry ice. Removable grinding chamber is easy to...

Continuously operating universal grinder with a powerful drive and a speed range of 3.000 to 6.500 rpm. Easy to clean working surface made of stainless steel. Two different grinding heads can be attached to the drive. Heads are easily changeable...

R 1402 Dissolver for use with EUROSTAR 20 high speed digital and control Overhead Stirrers (Cat. No. 340-98269 and 340-98530) and T 50 digital ULTRA-TURRAX Dispersers (Cat. No. 340-98248).• Working range: 1 to 30 L• Rotor diameter: 42...

Clamping range - stand: 25-36 mmClamping range - extension arm: 5-21 mmMaterial: cast aluminiumImage(s) are representative of the product group and not necessarily the individual product.

Specialized clamp with openings for the stands R 2722 and R 2723 as well as extensions with 16 mm. • Clamping range - stand: 34 mm • Clamping range - extension arm: 16 mm • Material: cast aluminum Image(s) are representative of the...

Particularly stable stand with H-shape base which prevents the stand from tipping backwards. Additionally equipped with a pneumatic spring stand rod, which enables heavy instruments/ attachments to be raised and lowered smoothly without difficulty, e.g...

• Interchangeable sieves for insertion into the grinding heads (Cat. No. 330-31681 and 330-31684) of the MF 10 Basic Mill (Cat. No. 330-31621 and 330-31618). Ensures maximum particle size filtering. Made of AISI 304 stainless steel.Image(s) are...

• For pulverizing substances with a Mohs hardness up to 6• Included with the analytical mill A 11 basic• Material: stainless steel (AISI 420)Image(s) are representative of the product group and not necessarily the individual product.

• Suitable for crushing materials up to Mohs hardness 5• Included with M 20• Material stainless steel (1.4122) Image(s) are representative of the product group and not necessarily the individual product.

• Components: Tube, stirring device, cover • Application: Mixing, stirring, extractions, preparation of soil sample suspensions, solubility testing for medication • M tubes are further suitable for sampling during operation - additional...

Replacement Star Shaped Cutter for A 10 Basic Mill (Cat. No. 340-98695).Image(s) are representative of the product group and not necessarily the individual product.

Used to crush fibrous substances such as paper and vegetation, but also for plastics and material with a low specific weight. Material: Stainless Steel (AISI 304)Image(s) are representative of the product group and not necessarily the individual product.

Specially designed for the dispersing instrument T 65 digital. The stand is equipped with a pneumatic spring which enables effortless raising and lowering of the dispersion unit. Diameter of support rod: 48 mm Dimensions (W x D): 460 x 530 mm Height: 1...

Disruptor Beads™, made from spherical lead free soda lime glass, are designed for use with the Disruptor Genie™ or TurboMix™ attachment (used with Vortex-Genie 2 or Vortex-Genie 2T) for optimum disruption of bacteria, yeast, fungi and...