ACCESSORIES

Holds 3 funnels at once on an 18 x 18 in. (45.7 x 45.7 cm) platform. Platform can accommodate 500 mL to 2 L separatory funnels and is constructed of stainless steel. Includes platform, clamps and hardware to secure 3 funnels.Image(s) are representative...

Ideal for large sample containers like carboys, jugs and bottles. The platforms high side walls secure samples, has a heavy-duty design and is constructed of stainless steel. The base tray has a non-skid rubber surface. Replacement Adjustable Bars...

Replacement Adjustable Bars with mounting hardware for use with Ohaus Adjustable Platforms and Large Vessel Carrier Platforms.Image(s) are representative of the product group and not necessarily the individual product.Bar Length in. (cm): 8.6 (21.8)Bar...

Adjustable clamping bars accommodate various vessel types. Constructed of stainless steel. The base tray has a non-skid rubber surface. Replacement adjustable bars available (Cat. No. 369-10394 and 369-10352).Image(s) are representative of the product...

Pre-mounted flask clamps for maximum utilization of platform space for flasks of all one size. Platform is constructed of type 304 stainless steel. Flask clamps are constructed of PVC. Ideal for polycarbonate flasks. Two-tier braces (available...

Ideal for slow speed applications; Petri dishes, culture flasks, and other flat bottom, low profile vessels (not included). The platform is constructed of type 304 stainless steel. The platform has a non-skid rubber surface. Two-tier braces (available...

Two-Tier Braces (set of 4) for mounting a second platform on Analog/Digital 16 kg & 23 kg Shakers. Stacking of platforms is not recommended for Reciprocating Shakers.Image(s) are representative of the product group and not necessarily the individual...

Rubber Mats for use with Ohaus Open Air Shakers.Image(s) are representative of the product group and not necessarily the individual product.

Allows for mounting of flask clamps, test tube racks, and bottle clamps. Platform slides over top of included tray and is tightened with adjustment screws. The platform is constructed of type 304 stainless steel. Optional accessories screw directly into...

These blocks have been designed for sample/serum and scintillation vials. Modular Blocks are constructed from a solid anodized aluminum block, this material is ideal for its temperature conducting and corrosion resistant properties. The close contact of...

Modular Blocks are constructed from a solid anodized aluminum block, this material is ideal for its temperature conducting and corrosion resistant properties. The close contact of tubes to block walls allow for maximum temperature transfer. Each block...

Modular Blocks are constructed from a solid anodized aluminum block, this material is ideal for its temperature conducting and corrosion resistant properties. The close contact of tubes to block walls allow for maximum temperature transfer. Each block...

Modular Blocks are constructed from a solid anodized aluminum block, this material is ideal for its temperature conducting and corrosion resistant properties. The close contact of tubes to block walls allow for maximum temperature transfer. Each block...

Ohaus® Cover for 0.5 mL/1.5 mL/2 mL Tube Blocks, for Incubating / Cooling Thermal Shakers (Cat. No. 369-10424 and 369-10427).Image(s) are representative of the product group and not necessarily the individual product.

Ohaus® 9 x 5 mL Eppendorf Tube Blocks for Incubating / Cooling Thermal Shakers (Cat. No. 369-10424 and 369-10427). Specifications:• Well diameter: 0.66 in. (1.68 cm)• Well depth: 1.93 in. (4.9 cm)• Dimensions (L x W x H): 4.1 x 5.7...

Ohaus® 24 x 2 mL Cryotube Block for Incubating / Cooling Thermal Shakers (Cat. No. 369-10424 and 369-10427). Specifications:• Well diameter: 0.50 in. (1.26 cm)• Well depth: 1.42 in. (3.6 cm)• Dimensions (L x W x H): 4 x 5.6 x 2.2...

Ohaus® 30 x 0.5 mL Microtube Block for Incubating / Cooling Thermal Shakers (Cat. No. 369-10424 and 369-10427). Supplied with clear rack and cover. Tubes not included. Specifications:• Well diameter: 0.31 in. (0.79 cm)• Well depth: 0.97...

Microplate Block with Lid for Incubating / Cooling Thermal Shakers (Cat. No. 369-10424 and 369-10427). Specifications:• Well size: 4.21 x 2.81 x 0.1 in. (10.7 x 7.1 x 0.25 cm)• Well depth: 0.9 in. (2.3 cm)• Dimensions (L x W x H): 4.7 x...

Half Size, Stationary Test Tube Racks are constructed of PVC coated steel. Includes hardware for easy attachment to platforms†. Dimensions (L x W x H): 5 x 7 x 4 in. (12.7 x 17.8 x 10.2 cm).†All shakers require a universal platform for...

Mounts the Caframo Crossover mixer (Cat. No. 430-98235) to any stable vertical plate including industrial stand, drum or vessel. Easy single bolt adjustment for multi-angle positioning. Angle the mixer into the vessel to improve mixing efficiencies...

This manual lift, heavy duty stand for Caframo Crossover (Cat. No. 430-98235) provides wide base stability and adjustable height. Base design accommodates drums up to 122 cm (48 in.) diameter. Plate steel and square tubing construction. This stand comes...

With the blade welded to the shaft, this impeller is immediately ready to use with the 1540 Crossover (Cat. No. 430-98235) and start mixing. No tightening or adjusting set screws is needed, and the one piece impeller is desirable for sanitary...

Optional bungee cords for securing vessels to rocker platforms. LaBungee cords stretch from 7 in. to 18 in. and come four to a pack. Compatible with:• BioMixer™ and Mini BioMixer• BlotBoy™ and Mini BlotBoy•...

Optional 10.5 x 7.5 in. flat or dimpled mat for use with BlotBoy Mini 3D Rockers (Cat. No. 365-10586).Image(s) are representative of the product group and not necessarily the individual product.

Optional 10.5 x 7.5 in. stacking platforms with flat or dimpled mat for use with BlotBoy Mini 3D Rockers (Cat. No. 365-10586).Image(s) are representative of the product group and not necessarily the individual product.

Save the expense and eliminate the space requirements of another piece of lab equipment. Placed and centered on a magnetic stirrer, this platform operates as an orbital vibrator for plates, flasks or other vessels. • Vibrate and mix; rotating orbit...

This patented magnetic clamp from Benchmark Scientific easily adjusts to accommodate a 125, 250, or 500mL flask. Simply attach to the magnetic platform and rotate until the desired size setting appears in the easy-to-read window. The clamp is made from a...

Tilted magnetic base for use with MAGic clamp platforms. Holds 15 mL and 50 mL tube racks (sold separately).Image(s) are representative of the product group and not necessarily the individual product.

AS 1.5 Fastening screw for the universal attachments AS 130.1 (Cat. No. 330-52882), AS 260.1 (Cat. No. 330-52885) and the separating funnel attachment AS 260.5 (Cat. No. 430-10094). Two AS 1.5 fastening screws are required for fastening a clamping roll...

For attaching separating funnels with ground opening NS 29 (2 x AS 1.13 necessary per separating funnel). For AS 1.10 Basic Holder (Cat. No. 330-28606) only.Image(s) are representative of the product group and not necessarily the individual product.

AS 1.12 Supporting Bar for attaching two AS 1.13 (Cat. No. 330-30277) ground section holders for fixing 1.000 mL separating funnels. For AS 1.10 Basic Holder (Cat. No. 330-28606) only.Image(s) are representative of the product group and not necessarily...

AS 1.7 Clamping Device for AS 501.1 Universal Attachment (Cat. No. 330-21388).Image(s) are representative of the product group and not necessarily the individual product.

For smooth shaking operations in the low viscosity range, e.g. for cell cultures, nutrient media in Petri dishes, culture bottles and vessels with a low center of gravity. With integrated slip-resistant foil (PP). • Dimensions (W x D x H): 470 x...

• For shaking of flasks, Erlenmeyer flasks and bottles with a round crosssection (without fixing clips)• Dimensions (W x D x H): 470 x 440 x 25 mm • Number of fixing clips (volume): 50 x AS 2.1 (25 mL), 48 x AS 2.2 (50 mL), 25 x AS 2.3...

• For various types of vessels. Infinitely variable clamping rolls allow universal adaptation to the vessels. • Dimensions (W x D x H): 480 x 500 x 120 mm • Set-up plate: 380 x 410 mm • Weight: 3.200 gImage(s) are representative...

• For use with universal attachment AS 501.1 and separating funnel attachments AS 501.2, AS 501.3 and AS 501.6• Dimensions (W x D x H): 480 x 480 x 120 mm Image(s) are representative of the product group and not necessarily the individual...

• For shaking out, eluting, extracting, gassing out, dissolving, enriching, etc.• Adjustment for the clamping rolls is infinitely variable, the set-up height can be changed by means of clamping devices• This attachment will hold 4 x...

• For shaking out, eluting, extracting, gassing out, dissolving, enriching, etc. • Adjustment for the clamping rolls is infinitely variable, the set-up height can be changed by means of clamping devices• Dimensions (W x D x H): 480 x...

• For shaking out, eluting, extracting, gassing out, dissolving, enriching, etc. • Adjustment for the clamping rolls is infinitely variable, the set-up height can be changed by means of clamping devices• Dimensions (W x D x H): 480 x...

For smoothly shaking dishes, but also for smooth mixing in vessels with a large, flat bottom (wide-necked Erlenmeyer flasks and beakers). A plastic foil with mild adhesive prevents the vessel from slipping. • Dimensions (W x D x H): 450 x 450 x 45...