VORTEXERS

Globes vortex mixer provides a smooth instant vortexing of even the largest sample sizes, including 50 mL tubes. The unique counter balance system creates maximum vortexing action, while minimizing noise and excessive vibration. This results in a...

One piece, stainless steel housing design optimizes clean-ups. Ideal for applications requiring accuracy and repeatability. The stainless steel one piece housing design is conducive to keeping your vortexer clean and free from contaminants. The variable...

Conveniently angled front panel features rocker switch for run, time and standby modes. One piece, stainless steel housing design optimizes clean-ups. Ideal for applications requiring accuracy and repeatability. The stainless steel one piece housing...

The OHAUS Analog Microplate Vortex Mixer is a variable speed analog mixer that is designed for continuous duty. The high speed and small orbit is optimal for effectively mixing microplates. Choose from two modes of operation: Touch mode which activates...

The OHAUS Digital Microplate Vortex Mixer is ideal for applications that demand repeatable results. Mixer features touchpad controls and LED displays for accurate speed and time results. Microprocessor control maintains set speed for strong, consistent...

The OHAUS Analog Heavy-Duty Vortex Mixer is a variable speed analog mixer that is designed for continuous duty. The heavy-duty design and efficient motor allow this mixer to operate in continuous duty and handle all accessories over the entire speed...

The OHAUS Digital Heavy-Duty Vortex Mixer is ideal for applications that demand repeatable results. Mixer features touchpad controls and LED displays for accurate speed and time results. The heavy-duty design and efficient motor allow this mixer to...

Built sturdy to provide stable and reliable vortexing action. Powerful pulsing vortex action produces excellent cell disruption for glass bead procedures. Capable of complete cell disruption of samples in only minutes. Unique pulsing action reduces heat...

Built sturdy to provide stable and reliable vortexing action. Ideal for applications that demand repeatable results. Microprocessor control maintains set speed for strong, consistent mixing action. Timer will display elapsed time or, when programmed to...

Built sturdy to provide stable and reliable vortexing action. Control allows low rpm startup for gentle shaking or high speed mixing for vigorous vortexing of samples. Two modes of operation; continuous mode when using accessory attachments or touch mode...

Built sturdy to provide stable and reliable vortexing action. Starts mixing when the cup head is pressed down. Speed is fixed at full rpm to provide vigorous vortexing of samples. Unit can be run in conditions from 4 to 40°C (39 to 104°F),...

Tube racks for use with BenchMixer™ XL (Cat. No. 365-10643) and BenchMixer™ XLQ (Cat. No. 365-10712).Image(s) are representative of the product group and not necessarily the individual product.Foam SheetMicroplate RackCapacity: 3Tube Size:...

Benchmarks BenchMixer XLQ has been designed for use in QuEChERS and other sample prep methods. Supplied with racks for 50 mL tubes held horizontally and 15 mL and 1.5/2.0 mL tubes held vertically, it takes the place of traditional manual shaking in these...

Optional foam rack attachment for use with BenchMixer™ V2 Vortexer (Cat. No. 655-10045). Holds 5 x 50 mL tubes in a vertical position (tubes not included).Image(s) are representative of the product group and not necessarily the individual product.

Optional foam rack attachment for use with BenchMixer™ V2 Vortexer (Cat. No. 655-10045). Holds 12 x 15 mL tubes in a vertical position (tubes not included).Image(s) are representative of the product group and not necessarily the individual product.

The BenchMixer™ V2 utilizes a smooth and powerful mixing technology similar to the original BenchMixer, with the advantage of a uniquely designed reversible rubber head that can be attached to the mixer in two orientations. For the vortexing of...

The BenchMixer™ XL is a heavy duty vortex mixer designed to facilitate hands-free mixing in tubes, flasks, vials or cylinders. It is ideal for the QuEChERS pesticide analysis method and is instantly adaptable to an exceptionally broad range of...

Optional combination head for one microplate & microtubes (38 x 1.5 mL & 28 x 0.5 mL). For use with for BenchMixer (Cat. No. 365-10577 and 365-10571), BenchMixer V2 (Cat. No. 655-10045), and Mortexer (Cat. No. 335-46999) vortex mixers.Image(s) are...

Optional 3 in. flat head attachment for BenchMixer (Cat. No. 365-10577 and 365-10571) and Mortexer (Cat. No. 335-46999) vortex mixers.Image(s) are representative of the product group and not necessarily the individual product.

Horizontal head attachments for vortex mixers.Image(s) are representative of the product group and not necessarily the individual product.No. of Tubes Held: 2Tube Size (mL): 50No. of Tubes Held: 4Tube Size (mL): 15No. of Tubes Held: 12Tube Size (mL): 1.5

Blocks for use with MultiTherm Heating (Cat. No. 365-10544) and Heating/Cooling (Cat. No. 365-10409) Shakers. The larger mass of the following blocks results in a reduced speed and temperature range.• Cat. No. 365-10499: Block, 24 x 12 mm ( 200 to...

The Incu-Mixer MP series is designed to provide an optimal method for vortexing and incubating microplates. Simultaneous heating from both the bottom surface and the lid provide temperature uniformity throughout the sample. Additionally, the heated lid...

The Small Ampule/Tube Attachment can be used with the Vortex-Genie 2 family of mixers and the Vortex-Genie Pulse. It provides vigorous end-to-end agitation combined with vortexing of up to four 15 to 17 mm diameter tubes or ampules.Image(s) are...

The Large Ampule/Tube Attachment can be used with the Vortex-Genie 2 family of mixers and the Vortex-Genie Pulse. It provides vigorous end-to-end agitation combined with vortexing of up to four 10 to 17 mm diameter tubes or ampules.Image(s) are...

High-density, double layered foam insert for prolonged shaking of one standard footprint microplate to protect sample from heat-buildup. This insert fits into the 6 in. (152 mm) Platform attachment (Cat. No. 332-15966) for use with the Vortex-Genie 2...

Two Elastic Bands securely fasten various sample vessels to the Recessed Platform (Cat. No. 332-32133). Two bands are included in the Large Sample Set (Model H302, Cat. No. 360-10009) for use with the Vortex-Genie 2 family of mixers and the Vortex-Genie...

Two high-density foam inserts to accommodate one standard footprint microplate. This insert fits into the 6 in. (152 mm) Platform attachment (Cat. No. 332-15966) and one is included in the Multiple Sample Starter Set (Model H301, Cat. No. 360-10007) for...

Two high-density foam inserts to accommodate up to 60 microtubes. This insert fits into the 6 in. (152 mm) Platform attachment (Cat. No. 332-32133) and one is included in the Multiple Sample Starter Set (Model H301, Cat. No. 360-10007) for use with the...

The Multiple Sample Starter Set (Model H301) can be used with the Vortex-Genie 2 family of mixers and the Vortex-Genie Pulse. It consists of a 6 in. (152 mm) Platform (Cat. No. 332-15966), Microtube Foam Insert (Cat. No. 332-32202) and Microplate Foam...

The Recessed Platform can be used with the Vortex-Genie 2 family of mixers and the Vortex-Genie Pulse in conjunction with either Foam Inserts (Cat. No. 332-32118, 332-32121, 332-32124, 332-32127) or Elastic Bands (Cat. No. 332-33663). The Recessed...

High-density Foam Inserts for each of the following: 9 to 16 mm Tubes, 14 to 29 mm Tubes, 29 to 37 mm Tubes. A Blank Foam Insert is also included for user customization. Each insert fits into the Recessed Platform (Cat. No. 332-32133) and one of each is...

Two high-density Foam Inserts to accommodate 29 to 37 mm diameter tubes. The insert fits into the Recessed Platform (Cat. No. 332-32133) for use with the Vortex-Genie 2 family of mixers and the Vortex-Genie Pulse. One insert is included in the Large...

Two high-density Foam Inserts to accommodate 14 to 29 mm diameter tubes. The insert fits into the Recessed Platform (Cat. No. 332-32133) for use with the Vortex-Genie 2 family of mixers and the Vortex-Genie Pulse. One insert is included in the Large...

Two high-density Foam Inserts to accommodate 9 to 16 mm diameter tubes. The insert fits into the Recessed Platform (Cat. No. 332-32133) for use with the Vortex-Genie 2 family of mixers and the Vortex-Genie Pulse. One insert is included in the Large...

The Large Sample Set (Model H302) can be used with the Vortex-Genie 2 family of mixers and the Vortex-Genie Pulse for beakers, flasks, and large tubes. It consists of a Recessed Platform (Cat. No. 332-32133), 2 Elastic Bands (Cat. No. 332-33663), and an...

Two high-density Foam Inserts are customizable by the user for odd-shaped vessels. The insert fits into the Recessed Platform (Cat. No. 332-32133) for use with the Vortex-Genie 2 family of mixers and the Vortex-Genie Pulse. One insert is included in the...

The 6 in. (152 mm) Platform can be used with the Vortex-Genie 2 family of mixers and the Vortex-Genie Pulse in conjunction with either the Microtube Foam Insert (Cat. No. 332-32202), Microplate Foam Insert (Cat. No. 332-32136) or Two-Tier Microplate Foam...

Replacement rubber cover for the 3 in. (76 mm) platform (Cat. No. 332-16905 and 360-10188). This may be used on the Vortex-Genie 1, Vortex-Genie Pulse, and the Vortex-Genie 2 family of mixers.Image(s) are representative of the product group and not...

Plastic pop-off cup for mixing and vortexing in single tubes. The pop-off cup may be used on the Vortex-Genie 1, Disruptor Genie, Vorex-Genie Pulse, and the Vortex-Genie 2 family of mixers.Image(s) are representative of the product group and not...

Plastic 3 in. (76 mm) platform with rubber cover (consists of Cat. No. 332-16905 and 332-33807) for mixing and vortexing in beakers, flasks and multiple tubes. The plastic 3 in. platform with rubber cover may be used on the Vortex-Genie 1, Vortex-Genie...