ACCESSORIES

Pitched blade propeller composed of chemically inert and corrosion resistant electropolished 316L stainless steel. The 5/16 in. (8 mm) bore is compatible with all Caframo shafts. Set screws included. For low shear, high top-to-bottom pumping capacity...

Blade and shaft are conveniently bundled together, able to address a variety of stirring applications. This axial flow impeller is effective for low shear mixing. The pitched blade propeller fixes to the shaft with included set screws. Blade and shaft...

Pitched blade propeller composed of chemically inert and corrosion resistant electropolished 316L stainless steel. The 5/16 in. (8 mm) bore is compatible with all Caframo shafts. Set screws included. For low shear, high top-to-bottom pumping capacity...

Straight blade composed of chemically inert and corrosion resistant electropolished 316L stainless steel. The 5/16 in. (8 mm) bore is compatible with all Caframo shafts. Set screws included. For high shear, low viscosity mixing with moderate vortexing,...

Dispersion blade composed of chemically inert and corrosion resistant electropolished 316L stainless steel. Broken particles are dispersed by the laminar flow set up by the blade. The 5/16 in. (8 mm) bore is compatible with all Caframo shafts. Set screws...

2 in. (50 mm) pitched blade propellers composed of chemically inert and corrosion resistant electropolished 316L stainless steel. Set screws included. For low shear, high top-to-bottom pumping capacity with high gas injection.Specifications:• Flow...

2 in. (50 mm) radial flow turbine 3-blade propellers. Composed of chemically inert and corrosion resistant electropolished 316L stainless steel. Set screws included. For high shear mixing with moderate vortexing.• Cat. No. 340-98101 is compatible...

Pitched blade propeller composed of electropolished 316L stainless steel is chemically inert and corrosion resistant. The 5/16 in. (8 mm) bore is compatible with all Caframo shafts. Set screws included. For low shear, high top-to-bottom pumping capacity...

Pitched blade propeller composed of chemically inert and corrosion resistant electropolished 316L stainless steel. The 5/16 in. (8 mm) bore is compatible with all Caframo shafts. Set screws included. For low shear, high top-to-bottom pumping capacity...

3/8 in. (9.5 mm) diameter shafts with a turned down 1/2 x 5/16 in. (13 x 8 mm) end. Will accommodate blades with both 5/16 and 3/8 diameters. All shafts are made from passivated 316L stainless steel for maximum corrosion protection. Image(s) are...

5/16 in. (8 mm) diameter shafts can be used with any blade that has a 5/16 in. (8 mm) diameter bore. All shafts are made from passivated 316L stainless steel for maximum corrosion protection.Image(s) are representative of the product group and not...

Accessory rod to be paired with System Stands A112 (Cat. No. 430-98133), A113 (Cat. No. 430-98136), and A114 (Cat. No. 430-98139). One or two rods can thread into the front legs of the stand base, determined by application. Useful for mounting...

Achieve enhanced process results with the addition of silicone sweep blades (Cat. No. 650-10537) to the U044 anchor impeller (Cat. No. 330-92044). The impeller with sweep is effective for low speed, high viscosity mixing up to 38,000 mPas. The tangential...

• These tangential flow impellers are effective for low speed, high viscosity mixing• The anchor blade is welded to an 3/8 in. (9.5 mm) diameter shaft• Made from electropolished stainless steel 316L• Chemically inert and corrosion...

Chuck compatible for High Torque and Compact stirrers, accepting impeller shafts up to 3/8 in. (10 mm) diameter. Chuck key includes tool for removal from stirrers output shaft for cleaning or replacement. Through shaft allows for easy adjustment of...

This radial flow impeller is a popular choice for high speed, low viscosity mixing in carboys or narrow neck flasks. Collapsible blades enter any opening over 3/8 in. (10 mm) diameter. The blades are pinned to the shaft, fanning out with agitation to a...

Sturdy stand in a smaller bench footprint, for Compact Digital Stirrers BDC2002 (Cat. No. 340-60118) and BDC2010 Reversing Digital Stirrer (Cat. No. 340-60150). The unique offset design centers impeller in vessel. The cast zinc-aluminum alloy base is...

This radial flow impeller is effective for high speed, low viscosity mixing. The 2 in. (50 mm) diameter blade is welded to an 5/16 in. (8 mm) diameter shaft. A high shear impeller with high vortexing properties, creating a vortex in 19 L (5 gal.) of...

Durable, strong, easy-to-use fastening clamps used to attach overhead stirrers to their stands. Includes a convenient place to hold chuck key. The cast zinc-aluminum alloy is coated for protection from corrosion and chemical spills.A120 Fastening Clamp...

Achieve greater stability stirring at speeds 1800 to 6000 rpm. Set includes collet, 5/8 in. (16 mm) shaft with an end turned down to 5/16 in. (8 mm), and three impeller blades with 5/16 in. (8 mm) bores. Shaft and blades are made from electropolished 316...

Shaft and impeller blades to fit collet of BDC250 stirrer (Cat. No. 340-98077). Made of all elctropolished 316L stainless steel. Includes one radial blade and one axial blade and interchangeable screw set. This set is also included in the BDC250 stirrer...

Support stand for Caframos BDC250 Petite Stirrer (Cat. No. 340-98077). Conveniently portable and easy to assemble for changing work stations or field work. The cast mild steel base is coated with chemical resistant epoxy paint. Included as part of BDC250...

Implement safety with a quick snap of this clear polyurethane chuck guard to the stirrer housing. Creates barrier around moving chuck, as well as protects chuck from chemical splashes. Use with overhead stirrers BDC1850 (Cat. No. 340-60109), BDC3030 (Cat...

This impeller serves a wide range of stirring applications, pairing the blade and shaft in a convenient package. This axial flow impeller is effective for high speed, low to medium viscosity mixing. The 21/2 in. (65 mm) diameter blade fixes to an...

An axial flow PTFE impeller for high speed, low viscosity mixing. With 45° pitched blades, the impeller is attached to a PTFE-coated stainless steel core shaft. The stainless steel core of the shaft provides stability. PTFE (polytetrafluoroethylene)...

A tangential flow PTFE impeller for low speed, higher viscosity mixing. The blade is attached to a PTFE-coated stainless steel core shaft. Designed for use in round bottom vessels and reaction flasks. The stainless steel core of the shaft provides...

A radial flow PTFE impeller for high speed, low viscosity mixing in narrow neck flasks. The blades are attached to PTFE-coated shaft, fanning out with agitation to a maximum diameter of 11/2 in. (40 mm). The stainless steel core of the shaft provides...

This durable stand provides excellent stability for bench stop stirrers even when agitating viscous materials. The wide base and H configuration allow for a wide range of vessel sizes, while 304 stainless steel stand rod enables strong engagement with...

This durable stand provides excellent stability for bench stop stirrers even when agitating viscous materials. The wide base and H configuration allow for a wide range of vessel sizes. Portable and adaptable to address changing work spaces, equipment,...

Maximize the stirring results of Caframos U044 anchor impeller (Cat. No. 330-92044) with the sweep blade accessory. Effectively move viscous product from vessel walls back to the center for thorough mixing. The Silicone SCX 0570 is compliant with FDA 21...

These tangential flow impellers are effective for low speed, high viscosity mixing. The square blade is welded to a 16 in. (400 mm) long, 5/16 in. (8 mm) diameter shaft. For stirring small volumes of viscous product.• Electropolished 316L stainless...

Stand rods only, compatible with A110 Safety Stand (Cat. No. 330-58141) or A110BASE Base Only (Cat. No. 330-58144). Customize your A112 (Cat. No. 430-98133), A113 (Cat. No. 430-98136), or A114 (Cat. No. 430-98139) stand to fit your apparatus. 25 mm (1 in...

These radial flow impellers are effective for high speed, low viscosity mixing. The straight blade is welded to a 16 in. (400 mm) long, 5/16 in. (8 mm) diameter shaft. High shear impellers with moderate vortexing properties. Cat. No. 330-58183 will...

These System Stands have been adapted to support additional apparatus for process monitoring and chemical synthesis. The base accommodates a central 25 mm (1 in.) diameter stand rod, and up to two additional 16 mm (5/8 in.) diameter Accessory Rods (Cat...

Implement safety by sliding this guard over the chuck. Creates barrier around moving chuck, with the snug fit protecting from splashing and corrosive fumes. Use with overhead stirrers BDC2002 (Cat. No. 340-60118), BDC2010 (Cat. No. 340-60150), BDC1850...

Guards the rotating chuck and shaft for safety and protects chuck from chemical splashes. The chuck hex tool is compatible with the bolts included for simple installation. The tough polycarbonate ABS is easy to clean. This guard is included with the...

Cat. No. 650-10576: Chuck and key for Caframo Crossover mixer (Cat. No. 430-98235). Facilitates quick impeller changes or positioning. Chuck key includes hex tool for output shaft installation and easy removal for cleaning. Accepts shaft diameters up to...

A sturdy simple mounting solution for the Caframo Crossover (Cat. No. 430-98235). The 260 x 100 mm (10 x 4 in.) plate secures to existing horizontal surfaces, mixing equipment, drum brackets or industrial stands. Slotted bolt pattern provides wide...

Protect resistive touch screen of Caframo Crossover (Cat. No. 430-98235) from splashes or dust without reducing functionality. Adhesive backing enables immediate installation and replacement. The resin-coated polyethylene terephthalate (PET) is...

Corning Power Supply for Slow Speed Submersible and Multiple Position Stirrers. Operates on 120V/60 Hz and is UL approved to meet needs in North America and other locations with similar requirements.Image(s) are representative of the product group and...