TLC

Calibrated end to end disposable glass micropipettes provide economical, precise measurement of TLC samples with better than 1% accuracy. The tubes are quickly filled by capillary action or with the spotting bulb. One spotting bulb is supplied with...

Economical capillary micropipettes with fire polished tips and calibration marks at 1,2,3,4, and 5 microliters. Accuracy is within 1%. Total length of each capillary is five inches for easy handling. A 15 aspirator tube with mouthpiece and 250...

A glass sprayer with a specially designed head to eliminate formation of droplets and spattering. This feature assures delivery of a fine misty spray and ends problems from an uneven discharge. Can be used with an air line or the rubber bulb supplied...

This specialized clamp along with the included septum is perfect for holding onto your spotting capillaries. It is especially handy for use with capillaries with a volume of less than 2 microliters. Without the use of a clamp these smaller capillaries...

Ammonium Biocarbonate is used with the VPF Apparatus with hot plate (Spectrum Cat. No. 476-11905) and the VPF Apparatus without hot plate (Spectrum cat. No. 476-11908).Image(s) are representative of the product group and not necessarily the individual...

Aluminum Racks, anodized or PTFE coated, for use with Standard Latch-Lid Tank (Spectrum Cat. No. 476-11761) and Standard Tank and Lid (Spectrum Cat. No. 476-11779)Image(s) are representative of the product group and not necessarily the individual...

Accessory Stand for Analtech UV LampsImage(s) are representative of the product group and not necessarily the individual product.

This compact, lightweight UV cabinet will accommodate TLC plates up to 20x20 cm and any of our 4 watt or 6 watt UV lamps. Access to the interior of the cabinet is via a flexible, dark curtain on the front of the cabinet. The contoured viewing port...

Replacement UV TubesImage(s) are representative of the product group and not necessarily the individual product.Watts: 4Wavelength (nm): 254Watts: 4Wavelength (nm): 366Watts: 6Wavelength (nm): 254Watts: 6Wavelength (nm): 366Watts: 8Wavelength (nm):...

High Performance TLC methods require application of sub-microliter sample volumes to the TLC plate. The Analtech NANOCAP Kit provides an inexpensive means of spotting sub-microliter samples for HPTLC.Accuracy and reproducibility are within 1%. The...

Spotting Bulb Assembly for use with glass micropipettes.Image(s) are representative of the product group and not necessarily the individual product.

These are the most rugged silica gel plates available. They not only ease handling and sample application, but also permit the use of up to 80% water in the developing solvent without loss of adherence of the adsorbent layer to the glass plate...

These are the most rugged silica gel plates available. They not only ease handling and sample application, but also permit the use of up to 80% water in the developing solvent without loss of adherence of the adsorbent layer to the glass plate...

These are the most rugged silica gel plates available. They not only ease handling and sample application, but also permit the use of up to 80% water in the developing solvent without loss of adherence of the adsorbent layer to the glass plate...

These are the most rugged silica gel plates available. They not only ease handling and sample application, but also permit the use of up to 80% water in the developing solvent without loss of adherence of the adsorbent layer to the glass plate...

These are the most rugged silica gel plates available. They not only ease handling and sample application, but also permit the use of up to 80% water in the developing solvent without loss of adherence of the adsorbent layer to the glass plate...

These are the most rugged silica gel plates available. They not only ease handling and sample application, but also permit the use of up to 80% water in the developing solvent without loss of adherence of the adsorbent layer to the glass plate...

The female luer lockadapters are made from Kel-F and offer a chemically inert adapter solution.Image(s) are representative of the product group and not necessarily the individual product.

Rotor Desiccator/Storage CabinetImage(s) are representative of the product group and not necessarily the individual product.

This transformer is for using the CycloGraph™ model I (Spectrum Cat. No. 476-11875 and 476-11878) in areas of the world that use 230 volt power. The CycloGraph™ can be used with either 50 or 60 hertz power, so only the voltage must be brought...

The Analtech Linear Sandwich Chamber Kit is designed for linear development of 10 x 10 cm HPTLC plates in a vapor unsaturated mode. The glass-backed plate forms one wall of the chamber with the adsorbent facing inward. The solvent reservoir requires only...

476-11893- This replacement tubing kit comes with all the components necessary to make your our replacement tubing sets including - 10 feet of natural FEP tubing (1/16 x 0.030), 10 end fittings (1/16 male nut with flangeless ferrule), 5 acetal unions...

Radial development on HPTLC plates increases separation of low Rf spots and gives better resolution than with linear development. Circular development provides a rapid means of analyzing single samples or for scouting solvent conditions in methods...

This convenient and inexpensive plastic utility rack has 30 places to hold micropipette vials or test tubes up to 16 mm in diameter. It makes storing all your micropipettes and associated applicators simple. Image(s) are representative of the product...

This sturdy stainless steel rack safely holds ten 20 x 20 cm TLC UNIPLATES (or a number of smaller plates at least 20 cm wide) for drying or storage. A backstop on each set of slides prevents plates from falling out the rear and permits vertical mounting...

Scraping adsorbent layers is greatly improved with this steel flat-blade scraper. Blade is 13 mm wide and tapered to a sharp edge for rapid removal of adsorbent from plate. Handle is aluminum. A general purpose tool for the laboratory. Image(s) are...

Silica Gel GF Pre-Scraped Rotor for CycloGraph™ and Chromatotron™. Sandwiched between specially molded plastic trays, these Rotors can be taken right from the packaging to the CycloGraph™ or Chromatotron™ system and used...

These silver nitrate impregnated silica gel plates are for argentation chromatography. They are impregnated with silver nitrate between 5% and 20%, which modifies the separation characteristics of the adsorbent layer to permit increased...

Activated Carbon, bulk size.Image(s) are representative of the product group and not necessarily the individual product.

Silica gel and bonded phases are based upon a 150A pore silica gel, 35 to 75 µm particle. Pore size 150 A.Image(s) are representative of the product group and not necessarily the individual product.

Ergosil is a chemically modified silica gel designed for the analysis of ergopeptine alkaloids. Ergosil will preferentially adsorb ergopeptine alkaloids such as ergotamine and ergovaline as well as pigments from plant extracts. The alkaloids may then be...

Kieselguhr Glass-backed UNIPLATES. Thickness 250 µm. 25 plates per box.Image(s) are representative of the product group and not necessarily the individual product.

Florisil Glass-backed UNIPLATES. Thickness 250 µm. 25 plates per box.Image(s) are representative of the product group and not necessarily the individual product.

10% and 20 % Acetylated Cellulose. 250 µm thickness.Image(s) are representative of the product group and not necessarily the individual product.

High Performance UNIPLATES provide high resolution separations in less than five minutes with migration distances as little as 5 to 7 cm. These plates are prepared with high efficiency silica gel having an 8 micron average particle diameter and narrow...

Analtech HPTLC Reversed Phase UNIPLATES™ . The availability of both normal phase and Reversed Phase HPTLC UNIPLATES™ completes HPTLC as a sensible, efficient and cost effective alternative technique for quantitative analysis. These Reversed...

High Performance UNIPLATES provide high resolution separations in less than five minutes with migration distances as little as 5 to 7 cm. These plates are prepared with high efficiency silica gel having an 8 micron average particle diameter and narrow...

The UNIBOND Sample Pack consists of five plates each of the following adsorbent types: RP2F, RP8F, RP18F, Amino F, and Cyano F.The size of the plate is 10 x 20 cm, scored to 2.5 x 10 cm. The coating thickness is 150 µm. The F indicates the UV254...

EMD Millipore HPTLC plates use an optimized silica 60 sorbent with a significantly smaller particle size: just 5 - 6 m compared to 10 - 12 m used for classical TLC. This enables a higher packing density and hence a smoother surface. Band diffusion is...

These plates are prepared using a special high purity silica gel with a calcium sulfate binder. UNISIL UNIPLATES offer exceptional discrimination for aflatoxins compared to other adsorbent layersImage(s) are representative of the product group and not...