CENTRIFUGE

Designed specifically for 5ml microcentrifuge tubes, including Eppendorf brand, this rack will also accommodate other tubes with a diameter of 13-16 mm.• Made of durable and corrosion resistant white polypropylene plastic• End plates have...

Perfect for benchtop use or freezer storage, this compact, double-sided polypropylene rack accommodates 0.2ml thin-walled PCR tubes on one side while the opposite side holds 1.5 mL to 2.0 mL microcentrifuge tubes. 80 wells on each side keep tubes upright...

Double-sided, compact polypropylene is perfect for use on the benchtop or in the freezer. One side accommodates 0.5 mL microcentrifuge tubes while the opposite side holds 1.5 mL to 2.0 mL microcentrifuge tubes. 96 wells on each side keep tubes upright in...

These polypropylene racks stack to conserve space, even when filled with tubes. Each rack holds 72 micro sample tubes in 6 x 12 rows. Steam autoclavable at 250°F (121°C). Top deck height is 21/4 in. (57 mm).Image(s) are representative of the...

Incubate eight to twenty microcentrifuge tubes in a beaker of water or ice. Made of buoyant polymethylpentene, with tiny bubbles for additional buoyancy throughout. Racks are 1/4 in. thick with 3/4 in. legs and a center rod handle. Steam autoclavable at...

These two piece racks include a lower tray to hold water or ice flakes. Molded of high-impact polystyrene. Choose from two sizes to best suit your needs. • Small rack holds 105 x 400 L microcentrifuge tubes or other tubes with a diameter of 8 mm...

Two-tier polypropylene rack holds twenty 1.5 mL microcentrifuge tubes in numbered wells. Tubes are held with roughly 1 in. (25 mm) protruding above the rack surface. Steam autoclavable at 250°F (121°C). Dimensions (L x W x H): 81/4 x 23/4 x 13/8...

Open sides make racks adaptable for use in a tray of crushed ice. Easily assembled. Dimensions are 5.08 x 4.15 x 1.70 in. (128 x 105 x 43 mm). White color.Image(s) are representative of the product group and not necessarily the individual product.For...

Small enough to hold in one hand and enough choices to accommodate most vials and small bottles. • Offered in 5 grid configurations• Dimensions: 12.8 x 10.5 x 4.3cm H (5.08 x 4.15 x 1.70 in.)• Polypropylene; autoclavableImage(s) are...

Holds large conical and round-bottom centrifuge tubes that cannot stand up by themselves (such a s Falcon, Corning, Nunc and Kimble). The epoxy-coated steel wire rack is 10.2 cm (4 in.) high and has two levels of square grids to hold 6 tubes up to 250 mL...

Formed of steel wire with epoxy coating, this holder supports the conical bottom of a single 50 mL conical tube as well as at a half height location. Autoclavable. Dimensions (W x H): 7.6 x 6.5 cm (3 x 22/16 in.)Image(s) are representative of the product...

The PrepSafe Floating Microcentrifuge Tube Rack protects samples from loss and contamination by holding 1.5 ml and 2.0 ml microcentrifuge tubes securely in a water bath or on the benchtop, even if tipped over. Immobilizing tabs allow tubes to be stored...

Unique tabs on the PrepSafe Microcentrifuge Tube Mini Floating Racks protect your samples from loss and contamination. Place tubes in slots and slide under tabs to keep tubes from opening when under pressure, submerged or knocked over. Patent pending...

Maximize storage and save benchtop space with microcentrifuge tube racks that are stackable when loaded or empty. Locking clips firmly connect multiple racks together to form larger arrays that can be easily transported. • Securely holds 24...

Incubate up to twenty-four 1.5 mL microcentrifuge tubes in a water bath. Easy to load, microtubes are held snugly and then released when the rack is pressed down on a benchtop. Dimensions: 11.9 x 7.8 cm (411/16 x 31/16 in.). Hole diameter: 10.8 mm (7/16...

Specifically designed for incubating 1.5 mL microcentrifuge tubes, this rack includes a hold-down disk which maintains a constant pressure on the tube caps and prevents them from opening during internal air expansion. The polypropylene disk with threaded...

BRANDs PCR rack securely holds 96-well PCR plates, tube strips, and individual tubes for easy handling, and is alphanumerically marked for sample identification. The PCR box holds the rack for storage, and withstands temperatures from -80 to 121°C...

Multi-purpose Centrifuge Tube Stand, Reusable, Non-SterileImage(s) are representative of the product group and not necessarily the individual product.

Plastic Racks are manufactured from polypropylene and are autoclavable, reusable, and recyclableImage(s) are representative of the product group and not necessarily the individual product.For Tube Size (mL): 15For Tube Size (mL): 50

Heavy solid acrylic blocks holds twelve or twenty-four 1.5 mL microcentrifuge tubes. Designed for both bench-top work as well as long term storage of beta-emitting radioactive isotope samples. Manufactured in the United States using Acrylic sheet...

Heavy solid acrylic blocks holds twenty-four 1.5 mL microcentrifuge tubes. Manufactured in the United States using Acrylic sheet certified by an independent organization to be 100% effective in shielding against beta radiation. Designed for both...

Heavy solid acrylic blocks hold four 1.5 mL microcentrifuge tubes. Designed for both bench-top work as well as long term storage of beta-emitting radioactive isotope samples. Manufactured in the United States using Acrylic sheet certified by an...

Allows for safe and easy storage and transport of samples. Removable shelves and racks are available in many sizes to accommodate different microcentrifuge tubes. Units are designed to allow icing of samples if desired. Supplied with non-skid feet and...

Polypropylene rack for 1.5 mL micro test tubes available in four colors. Can accommodate 50 micro tubes with lid open (without interfering) or 100 micro tubes with lid closed or without lids. Racks are stackable even when completely loaded with test...

This innovative line of plastic test tube racks are shipped flat in order to reduce shelf space and then simply snap together for use. The special design allows all samples to be incubated at the same temperature. These racks can be used in freezers...

Workstation rack holds 4 different sizes of microtubes, screwcap microtubes, PCR tubes and microcentrifuge tubes. The back row features a locking system that holds tubes securely for one-handed opening and closing. Multiple racks can be interlocked...

• Designed to hold both 15 mL and 50 mL centrifuge tubes in one rack• The rack ships flat and is simple to assemble• It holds twenty 50 mL and thirty 15 mL centrifuge tubes Technical Information• Material: Acrylonitrile Butadiene...

• Autoclavable • Reinforced polypropylene (PP) for strength and durability• Rubber feet provide stability on slick surfaces• Numeric markings for sample identification• Compatible with both 1.5 and 2 mL microtubes •...

• Autoclavable polycarbonate (PC) rack for sample processing and short to medium term storage down to -80°C• Racks can be stacked or coupled with other racks to form a larger workstation• Numeric markings for sample...

• Reinforced nylon rack is autoclavable and chemical resistant • Fits 1.5 mL and 2.0 mL microtubes • Single piece construction • Molded handles facilitate secure handling • Alphanumeric markings for sample identification...

• Autoclavable polypropylene (PP) • Excellent rack for benchtop use or freezer storage • 80-place for 1.5 mL and 2 mL tubes • 60-place for 0.5 mL and 0.2 mL tubes • Eight color options for sample and benchtop organization...

• Reinforced nylon rack is autoclavable and chemical resistant • Fits 1.5 mL and 2.0 mL microtubes • Single piece construction • Molded handles facilitate secure handling • Alphanumeric markings for sample identification...

• Autoclavable polypropylene (PP) • Excellent rack for benchtop use or freezer storage • 96-place for 1.5 mL and 2 mL tubes • 96-place for 0.5 mL and 0.2 mL tubes • 96 well racks have translucent cover to allow viewing of...

• Autoclavable polypropylene (PP) construction for strength, buoyancy, and temperature resistance • Racks float with full load of filled tubes • Molded handle in center of rack for comfort and support during transport • Legs allow...

• Reinforced polypropylene (PP) is autoclavable • Shipped flat to save shelf space and quickly assembled when needed • Dimensions (L x W x H): 270 x 130 x 30 mm (10.6 x 5 x 1.2 in.) Image(s) are representative of the product group and...

20-well, autoclavable, blue polypropylene tube rack. Interlock multiple racks to increase tube storage. Easily remove tubes using finger slot on front of the rack. Bi-level rack with large molded coordinates enables easy tube identification.• Holds...

Polypropylene 4-way racks feature a unique system of tabs and slots which facilitate easy assembly and sturdy fit. Link together to create as large a rack as you require for your bench top applications. Autoclavable. • Each module measures 174 x 95...

Polypropylene fraction-collector-plate style racks. Easily fill and transfer 80 tubes in compact arrangement (5 x 16 array). Molded-in coordinates to aid organization. Autoclavable.• Holds 1.5/2 mL microtubes• Well diameter: 11 mm•...

Compact footprint for microtube and cryogenic vial storage. Made from translucent vibrant colored polypropylene with a frosted labeling area. Includes and easy open, friction fit lid. Safe for low temperature storage. Boxes are designed for quick visual...

Easy-to-grasp tabs for sample handling and storage. 96 wells for 0.5 mL tubes on one side and 96 wells for 1.5/2.0 mL tubes on the reverse side. Made of polypropylene. Wells are arranged in standard 8 x 12 array. Tabs on each end of rack snap lid into...