SAMPLERS

The H-1240D penetrometer adds a digital gauge to the H-1240 electric penetrometer (Cat. No. 341-86650) to provide precise at-a-glance readings, as well as the ability to automatically start a test with a button push and have the test end after a preset...

Takes the H-1200 universal penetrometer (Cat. No. 341-86647) and adds an automatic digital timer to it. The timers release mechanism is switchable between seconds minutes, or hours. Timer may be set in 1/10th second intervals. Plunger releases with push...

Direct-reading instrument for precision penetration measurements of bituminous materials, cement, petrolatum and waxes, as well as food, cosmetics and pharmaceutical products. Unit has 5 in. diameter indicator dial, graduated in 400 divisions of 0.1 mm,...

Lighter and smaller than H-1200 (Cat. No. 341-86647) for field work, units micrometer adjusts for accurate settings, as well as coarse adjustment for approximate settings. Only one additional 50 g loading weight is included with a H-1280 needle (Cat. No...

These units are constructed of corrosion-resistant Type 302 stainless steel. A weighted plunger with a Viton O ring seals the reservoir chamber at the bottom. A negligible amount of liquid will enter during descent. Unit is not supplied with cable. We...

Recovery of used grease / small obtainable samples; ASTM D1403, 1/4 scale. (Not considered a substitute for full-size cone specified in ASTM D217.) Weight: 9.38 g. The Penetration Needle, Recovery of Used Grease, Small Samples, ASTM D1403 supports the...

Each sampler consists of an inert polypropylene head with stainless steel fittings and an aluminum pole assembly with a golden alodine finish. It comes with a 1000 mL narrow-mouth sample bottle (989-10834) with a PTFE- lined cap (849-19981). To use it,...

An important tool for sampling powders, pellets, and other friable materials which may become non-homogeneous in the container. These samplers are made of anodized aluminum and have a sharp, stainless steel point. The T-handle is turned to close the...

Provides an efficient method of preparing subsamples of collected water-sediment mixtures from stream flows for water quality analysis. Water sediment samples are poured into the sample splitter where they are composited into one representative cross...

• Ideal for sampling from spillways, docks and other sub surfaces • No need to physically enter the sample area • Eliminates surface contamination • Helps meet EPA requirements for water and wastewater sampling • Lightweight...

Uni-Core is a disposable punch and is manufactured from plastic. Each stainless steel tip provides up to 500 punches and is ideal for laboratories with low sample volumes.The Harris Punches were developed to be used with paper fiber to remove a disk from...

Enclosed Sample Splitters are ideal for dusty samples, includingcoal, coke and chaff. Humboldt splitters are constructed of cold-rolled steel, or in some cases, stainless steel. All splitters include pans, scoop and cleaning brush. Meet ASTM C702, D410,...

Riffle-type sample splitters divide or halve dry materials such as cement, gravel, powdered ores, coal, coke, sand, soils, etc. Material poured into the hopper is divided into two equal portions by a series of chutes that discharge the material...

Riffle-type sample splitters divide or halve dry materials such as cement, gravel, powdered ores, coal, coke, sand, soils, etc. For rapid, single-step reduction of large sample volumes - ideal forfield applications. Material poured into the hopper is...

Complete range of white polystyrene cutlery. Individually packaged in tamper evident single bags. Traceability on each bag. Raw material is compliant with regulation EC N DEG 1935/2004 for food contact. Sterility Assurance Level based on ISO 11137:...

Thermo Scientific 5G Terra Core Soil Sampler is a cost effective, time saving, disposable transfer tool for soil sampling as described in USEPA SW-846 Method 5035.The Terra Core soil sampler delivers an approximate 5 g sample quickly and conveniently...

Uniquely-designed top spin bar and bottom valve plate mechanism provides a positive seal for sample retention along with greater control for releasing the sample. Modular design has added flexibility by allowing the connection of several sections to form...

Minimize damage when taking samples from bags. The needle point sampler punctures the bag with minimum damage, enters a maximum of 11 in. (28 cm) deep, and is pulled out with sample ready to be poured out of the hollow handle. Made of chrome-plated brass...

Disposable zone samplers for taking samples from multiple layers of the sample material. Suitable for free-flowing powders and small-grain granulates. The representative all-layer sample can be emptied directly through the open handle into a sample...

Hollow 90° magnesium cone and plunger. Total cone weight: 30.0 g. Supports the following standards: ASTM D2884Image(s) are representative of the product group and not necessarily the individual product.

Measuring firmness of solid and plasticized fats: shortenings, butter, margarine. AOCS Cc 16-60, 20 aluminum cone, 3.2 mm ferrule, 0.8 mm stainless steel blunt tip. Overall length 106 mm. Weight: 45 g.Image(s) are representative of the product group and...

The ZoneDispo disposable all-layer sampler is used in sampling to collect a representative all-layer sample from three different layers. Suitable for free-flowing powders and small-grain granulates. The collected sample can be secured and transported in...

Blue polypropylene dipper container with screw cap (90 mL size has hinged lid) and removable handle. Shock resistant. Packaged individually in tamper evident single zip bags. Traceability information on each bag. Sterile SAL 10-3. Raw material is...

TargetDispo is used to take a target point sample at a position in the sample material that has previously been precisely determined. The sampler pierces into the powder or granulate while closed. When it reaches the sample removal point it is opened and...

Penetration Needle for Food, Paste, and Paints; U.S. Dept. of Agriculture. Hollow 90° aluminum cone and tip. Weight: 35 gImage(s) are representative of the product group and not necessarily the individual product.

Grease-testing penetrometers; ASTM D217, D937 ASA Std. Z11.3;• H-2520 (Cat. No. 621-10206): Hollow 90° brass cone. Removable nut and stem. Weight: 102.5 g.• H-2522 (Cat. No. 621-10209): Hollow 90° stainless steel cone, highly polished...

These collection devices incorporate a sturdy sampling scoop that threads into a dedicated leak-proof 190 mL (6.5 oz) container ensuring safe and efficient isolation of material. Rigid scoop is made of white, high-impact polystyrene plastic strong enough...

Especially small sample quantities (10 mL) can be taken with MicroDispo. In pharmaceutical applications especially it often happens that only a small quantity can or should be extracted for analysis. Using the disposable sampler, precise target point...

Ideal for viscous liquids, this 50 mL (1.65 oz) liquid sampler is made for immersion into a can, bottle, tank, vat, etc. Nickel-plated brass cup and tubular handle with finger grips are 45 cm (171/2 in.) long. Center rod with finger ring actuates a valve...

Eliminates the cost of separate sterile bags or containers, saving time and money in the sample collection process. These high impact polystyrene scoops with detachable lids have a longer handle that increases the distance between the hand and sample,...

This sample ladle is made from pure PTFE and is supplied with a fixed 6 in. (15 cm) handle. Totally inert. 10 ml capacity. Dimensions: top ID 1 and bottom OD is 3/4. Image(s) are representative of the product group and not necessarily the individual...

Joint sealant for asphalt & concrete pavements; ASTM D5329, Resilience ball penetration tool. Total weight: 27.5 g. The Joint Sealant for Asphalt & Concrete Pavements ASTM D5329 supports the following standards: ASTM D5329.Image(s) are representative of...

Sterile polystyrene sampling spoons designed to gather small amounts of sample material. Sampling spoons are 7 in. (17.8 cm) long. The long handle reaches easily into jars, bottles, and other confined areas, minimizing the potential of personal contact...

The LiquiDispo disposable sampler can be used to take sample of liquids from highly liquid to slightly viscous. An ergonomic handle makes it easier to draw the sample: up to 200 mL can be drawn, as with a syringe.• Ergonomic handle• No...

The ViscoDispo disposable sampler can be used to take samples of high-viscosity media up to 100.000 mPas. The ergonomically shaped handle and the very stable drawbar make it easy to draw even viscous substances.• Ergonomic handle• No...

One-piece molded scoops with extra-long handles have the perfect shape for rapid sampling. Rounded contours prevent material retention.Image(s) are representative of the product group and not necessarily the individual product.Length (in.): 7Capacity oz...

The E-Z Sampler is an efficient and time saving method of sampling unknowns from drums and tanks. Constructed of chemically resistant polypropylene, the E-Z Sampler is supplied with a 39-inch head/shaft assembly and a 125 mL borosilicate glass bottle...

Hardened stainless steel tip with special plunger. Image(s) are representative of the product group and not necessarily the individual product.

Excellent for sampling from tank cars, tank trucks and barges, these samplers are well suited for sodium hydroxide, potassium hydroxide, hydrochloric acid, acetic acid, formaldehyde, sulfuric acid, etc. • Constructed of a 500 mL (16 oz)...

Suitable for use with most liquids. Quality material and fine workmanship make these dippers long lasting and economical. 60 ml (2 oz) size is made of one-piece construction. NSF-approved for use in the food industry.Image(s) are representative of the...