MICROPLATES

114 µm hydrophobic porous film with medical-grade adhesive for tissue culture plates, bio-blocks and 96-well plates where gas exchange is necessary. Allow carbon dioxide exchange while minimizing evaporation, cross-contamination and spillage...

This clear acrylic level surface helps in pouring immunological plates. Each leg is adjustable, and an inset leveling bulb below the working surface assists in accurate adjustment. The rigid platform is 8 x 8 x 3/8 in. thick (203 x 203 x 9.5 mm).Image(s)...

Make precise additions of liquid components to microplate wells by adjusting plates to the most convenient angle. The angular presentation of the plate and clear acrylic platform beneath allows you to easily judge which wells have received liquid...

Designed to do tedious tasks with a minimum of effort, the 96 open-ended pipette tips of this unique product fit all types of 96 well plates from flat, vee or round bottom plates to 0.2 mL thin walled PCR plates and tubes. Tip will retain up to 10 mL of...

Each half cavity has a top opening for introduction or withdrawal of solutions and holds 1 mL in each half cell. Clear acrylic construction with 7 stainless steel screws and wing nuts for clamping cells and dialysis membrane. Cavity plug screws are PTFE...

Made of polypropylene. This plate is used mainly for compound storage and enzyme assays. It is available colorless and in four different colors. DMSO resistant.Image(s) are representative of the product group and not necessarily the individual product...

This 384-well plate has a working volume of 400 µl. It is perfect for compound storage and handling of biological samples. Well bottom is round to facilitate aspiration. Suitable to be used with DMSO and biological buffers. Packed in a bag of 4...

Ideal for transferring small volumes of inoculum from microplates to other plates or solid supports. Replication of YAC and cosmid libraries, colony hybridization, antibiotic sensitivity testing and phage typing. Features 1-inch durable pins made of...

BRAND PCR plates are manufactured from high-quality virgin plastics for excellent, reproducible results in most PCR applications. 384-well plates are manufactured without lubricants or chemical additives that can contaminate reagents and samples. •...

BRAND PCR plates are manufactured from high-quality virgin plastics for excellent, reproducible results in most PCR applications. 96-well plates are manufactured without lubricants or chemical additives that can contaminate reagents and samples. •...

BRANDplates immunoGrade™ plates are optimized for the immobilization of IgG. They offer the highest binding capacity for molecules with mixed hydrophobic and hydrophilic regions. An excellent choice for the majority of standard ELISAs, and also...

cellGrade™ is a standard plate for the cultivation of adherent cell lines. The surface is hydrophilic compared to untreated polystyrene, with freely-accessible carboxyl and hydroxyl groups. Serum components are easily bound allowing cells to...

cellGrade™ plus plates for the cultivation of cells in reduced-serum media and fastidious cell lines. In addition to carboxyl and hydroxyl groups, free amino groups are present on the surface for a protein-line composition that allows for direct...

cellGrade™ premium plates with surface characteristics for the most demanding cell lines. A poly-D-Lysine-equivalent, with analogous results regarding cell growth and morphology. Cell adhesion is optimized, reducing cell damage from frequent...

BRANDplates hydroGrade™ plates feature a strongly hydrophilic surface, with a strong affinity to hydrophilic molecules, such as glycoproteins and peptides, antibodies with predominantly hydrophilic regions, and nucleic acids. They are an...

BRANDplates inertGrade™ 96-well microplates for cultivation of suspension and stem cells are available in a full range of well shapes and colors. These individually wrapped sterile plates have orange embossed alphanumeric lettering for easy...

BRANDplates lipoGrade™ plates feature a strongly hydrophobic/lipophilic surface, for the immobilization of biomolecules with strongly hydrophobic regions. They are an alternative to the immunoGrade™ plates for solid phase assays, and are a...

BRANDplates Strip Plates allow the ultimate in flexibility. A rigid frame with removable F-bottom 8-strips allows separation of samples. Choose from two types of construction:• Without grid: Individual 8-strips can be removed and placed withing...

pureGrade™ BRANDplates feature untreated surfaces for use in a variety of laboratory tasks, such as homogeneous assays, screening and storage.96-well format plates are available in U-bottom, V-bottom, F-bottom and C-bottom well shapes, in...

pureGrade™ BRANDplates feature untreated surfaces for use in a variety of laboratory tasks, such as homogeneous assays, screening and storage.For sterile applications, such as bacteriological assays, pureGrade™ S plates are sterilized by...

The Brand Cap Tool can be used for easy capping and decapping of strip caps to standard PCR Plates.Image(s) are representative of the product group and not necessarily the individual product.

Self-adhesive films for cases where a multiwell plate needs not only to be covered, but also securely sealed. These film sheets can be applied on the plates and removed without the use of expensive equipment, or can be applied with a hard rubber roller...

This line of white PCR products is designed specifically to optimize results when performing quantitative Real Time PCR (qPCR). White PCR strips and plates offer significantly better results in the analysis of fluorescence signals and consequently with...

• 96 Deep Well Polypropylene Storage Plates can be used for the growth of bacterial cultures or storage of compounds• Available in several well bottom shapes to match applications, including:- Conical bottom designed to minimize residual...

Foil Sealing Film (50 µm) reduces sample evaporation, can be pierced easily with pipet tips and automation, and is heat and cold resistant. Recommended use for temperature range -80°C to 120°C. 100/Re-sealable bag, 100/Case. Available...

• Recessed, consistent borosilicate glass bottom is optically clear, and provides microwell ideal for cell culture and microscopy or imaging• Non-cytotoxic medical adhesive does not inhibit cell growth• Multiple Well Plates are labeled...

• High-quality, optically clear borosilicate glass cover slips are ideal for specialty microscopy and imaging • Consistent flatness and scratch-free• Resistant to organic solvents• Packaged in a hinged plastic storage case•...

Breathable Sealing Film promotes uniform gas exchange and can be pierced easily with pipet tips. Reduces outer well evaporation and cross contamination. Recommended for use between -20°C and 80°C. 50/Re-sealable bag, 50/Case, Sterile.Image(s) are...

Costar Multiple Well Microplates are clear, round bottom well shape and come non-treated.Features:• Flat bottoms• Nonreversible lids with condensation rings to reduce contamination• Individual alphanumerical codes for well...

The Corning Spheroid Microplate is a plate developed for basic research and drug discovery markets, to aid in the 3D cell culture applications, particularly in cancer and stem cell research. This product is available in both 96 and 384 well formats, with...

Available with untreated, tissue culture-treated or high-binding surfaces.• Demarcated in an 8 x 12 array with 16 wells per square• Square wells with flat bottoms• 2 µl well volume• Come with area for applying a barcode...

Flat bottom microplates are ideal for miniaturized fluorescent and luminescent cell bases or homogenous assays. Improves signal intensity and assay window. Round wells with raised rims reduce wicking. The flat bottom design is ideal for small volume...

Corning 384 Well Plates, Low Volume, with Generic Barcode.Specifications:• Material: Polystyrene• Maximum Volume: 50 µl• Working Volume: 5-40 µl• Code 128 bar code format ensures compatibility with most bar code scanning...

384-Well Polypropylene Microplates and Deep Well Blocks for Compound Storage and Assays.• Standard microplates and deep well blocks are available in a round bottom design with rounded well geometry to reduce wicking and facilitate liquid...

Available with either a tissue culture-treated surface for cell-based assays or a non-treated surface for solution-based, homogeneous assays.Built to proposed industry standard footprint. Total well volume is 112 µl.Image(s) are representative of...

• Fits Corning 96 round well plates and blocks• Manufactured from EVA (ethyl vinyl acetate) and polymer is compatible with DMSO• Certified DNase- and RNase-free• Can be applied manually or with the Storage Mat Applicator (Cat. No...

• Fits 96 square 2 mL well storage blocks• Manufactured from EVA (ethyl vinyl acetate) and polymer is compatible with DMSO• Certified DNase- and RNase-free• Can be applied manually or with the Storage Mat Applicator (Cat. No...

Bottoms are 60% thinner than conventional polystyrene plates, resulting in lower background fluorescence and enabling readings down to 340 nm. Opaque walls prevent well-to-well crosstalk. Optically clear flat well bottom permits direct microscopic...

Designed for in vitro diagnostic assays. Flat bottom strips are designed to easily break apart and are pre-assembled in an egg-crate style strip holder that allows each individual well to be positioned back into the plate once broken. High binding...

Designed for in vitro diagnostic assays. Flat bottom strips are designed to easily break apart and are pre-assembled in an egg-crate style strip holder that allows each individual well to be positioned back into the plate once broken. Not treated (or...