IKA* Dispersing Elements for T10 Basic ULTRA-TURRAX* Disperser

The variety of media to be processed also requires a variety of rotor-stator configurations and seals. In many cases it is necessary to use two dispersing elements subsequently, for pre-crushing and fine crushing. The quick-connect coupling facilitates the exchange of the dispersing elements. Dispersing elements can be cleaned quickly and easily. The system consists of a rotor within a stationary stator. Due to the high circumferential speed, the medium to be processed is drawn axially into the dispersion head and then forced radially through the slots in the rotor-stator arrangement. The high speed and minimal gap between the rotor and stator produces extremely strong shear forces which results in better dispersion.

Bearing Type:
• N PTFE

Degree of Fineness Achieved:
• G Coarse
• ST Sawtooth

Sawtooth:
• Recommended for use with fibrous materials
• Sawtooth design creates a cutting and tearing action for shredding fibrous materials
• Made of high quality stainless steel

Polycarbonate (KS, D):
• Ideal for applications where cross-contamination is not permitted
• Disposable & single-use
• No cleaning required
• Each package consists of 12 disposable tubes
• Plastic materials used are FDA approved
Image(s) are representative of the product group and not necessarily the individual product.

Dispersing Tools
Volume Range (mL): 0.5 - 10
Immersion Depth Range (mm): 20 - 75
Ultimate Fineness, Suspensions (µm): 5 - 25
Ultimate Fineness, Emulsions (µm): 1 - 10
Stator Diameter (mm): 5
Rotor Diameter (mm): 3.8
Shaft Length (mm): 92
Sterilization Methods: All methods

Dispersing Tools
Volume Range (mL): 1 - 100
Immersion Depth Range (mm): 20 - 100
Ultimate Fineness, Suspensions (µm): 5 - 25
Ultimate Fineness, Emulsions (µm): 1 - 10
Stator Diameter (mm): 10
Rotor Diameter (mm): 7.6
Shaft Length (mm): 115
Sterilization Methods: All methods

Dispersing Tools
Volume Range (mL): 1 - 50
Immersion Depth Range (mm): 20 - 95
Ultimate Fineness, Suspensions (µm): 5 - 25
Ultimate Fineness, Emulsions (µm): 1 - 10
Stator Diameter (mm): 8
Rotor Diameter (mm): 6.1
Shaft Length (mm): 115
Sterilization Methods: All methods

Volume Range (mL): 1 - 100
Immersion Depth Range (mm): 23 - 100
Ultimate Fineness, Suspensions (µm): 5 - 25
Ultimate Fineness, Emulsions (µm): 1 - 10
Stator Diameter (mm): 10
Rotor Diameter (mm): 7.5
Shaft Length (mm): 115
Sterilization Methods: All methods

Volume Range (mL): 1 - 20
Immersion Depth Range (mm): 20 - 90
Stator Diameter (mm): 7
Rotor Diameter (mm): 4.8
Shaft Length (mm): 65
Sterilization Methods: autoclavable

Volume Range (mL): 1 - 40
Immersion Depth Range (mm): 20 - 50
Stator Diameter (mm): 7
Rotor Diameter (mm): 4.8
Shaft Length (mm): 110
Sterilization Methods: autoclavable

Volume Range (mL): 1 - 50
Immersion Depth Range (mm): 22 - 95
Ultimate Fineness, Suspensions (µm): 5 - 25
Ultimate Fineness, Emulsions (µm): 1 - 10
Stator Diameter (mm): 8
Rotor Diameter (mm): 6.1
Shaft Length (mm): 115
Sterilization Methods: All methods