IKA* Dispersing Elements with PTFE Bearing for ULTRA-TURRAX* T50 Disperser

AISI 316L stainless steel dispersing tools with PTFE bearings for use with the T 50 Digital ULTRA-TURRAX. The variety of media to be processed also requires a variety of rotor-stator configurations and seals. In many cases it is necessary to use two dispersing elements subsequently, for pre-crushing and fine crushing. The quick-connect coupling facilitates the exchange of the dispersing elements. Dispersing elements can be cleaned quickly and easily. The system consists of a rotor within a stationary stator. Due to the high circumferential speed, the medium to be processed is drawn axially into the dispersion head and then forced radially through the slots in the rotor-stator arrangement. The high speed and minimal gap between the rotor and stator produces extremely strong shear forces which results in better dispersion.

Degree of Fineness Achieved:
• G Coarse
• M Medium
• F Fine
• ST Sawtooth

Sawtooth:
• Recommended for use with fibrous materials
• Sawtooth design creates a cutting and tearing action for shredding fibrous materials
• Made of high quality stainless steel
Image(s) are representative of the product group and not necessarily the individual product.

PTFE Bearing
Volume Range (L): 0.25 - 10
Immersion Depth Range (mm): 70 - 250
Ultimate Fineness, Suspensions (µm): 10 - 30
Ultimate Fineness, Emulsions (µm): 1 - 10
Stator Diameter (mm): 45
Rotor Diameter (mm): 40
Shaft Length (mm): 290
Sterilization Methods: All methods

PTFE Bearing
Volume Range (L): 0.5 - 15
Immersion Depth Range (mm): 70 - 250
Ultimate Fineness, Suspensions (µm): 25 - 50
Ultimate Fineness, Emulsions (µm): 5 - 20
Stator Diameter (mm): 45
Rotor Diameter (mm): 40.5
Shaft Length (mm): 290
Sterilization Methods: All methods

PTFE Bearing
Volume Range (L): 0.5 - 20
Immersion Depth Range (mm): 70 - 250
Ultimate Fineness, Suspensions (µm): 40 - 100
Ultimate Fineness, Emulsions (µm): 10 - 30
Stator Diameter (mm): 45
Rotor Diameter (mm): 36
Shaft Length (mm): 300
Sterilization Methods: All methods

PTFE Bearing
Volume Range (L): 0.5 - 20
Immersion Depth Range (mm): 70 - 250
Ultimate Fineness, Suspensions (µm): 40 - 100
Ultimate Fineness, Emulsions (µm): 10 - 30
Stator Diameter (mm): 45
Rotor Diameter (mm): 38
Shaft Length (mm): 300
Sterilization Methods: All methods