Labconco* PrimeMate Oil Change System

The PrimeMate™ reduces the hassle and mess of changing the oil in your rotary vane or hybrid pump. Depending on your pump, the PrimeMate performs up to 4 oil changes before the clean oil container must be replaced or refilled and the used oil container emptied.

It requires less than 13 minutes to drain the used oil and fill with clean oil.

The PrimeMate fits easily on a lab cart so that it may be transported to and shared by vacuum pumps throughout the building. Quick connect coupler attaches to your pumps drain port for easy tubing attachment. An optional battery pack allows the PrimeMate to operate when a wall receptacle is not accessible.

Components include:
• Powder-coated housing with lift off cover
• One empty 1 gallon (3.8 L) plastic used oil container
• One empty 1 gallon (3.8 L) plastic clean oil container
• Two peristaltic pumps (one fill and one drain)
• 6 ft. (1.83 meters) drain/fill flexible tubing with connectors
• Power switch; drain switch; fill switch; and indicator lights for power, draining, filling and waste full
• 12 volt DC power supply, power cord with plug, and male 1/4 NPT coupler for connection to a user-supplied rotary vane vacuum pump

Note: the coupler fits rotary vane vacuum pumps sold by Labconco Corporation. If user-supplied pump has a drain port not compatible with a 1/4 NPT coupling connection, a suitable adapter will be required.
Image(s) are representative of the product group and not necessarily the individual product.