Laboconco™ Acid-Resistant CentriVap™ Centrifugal Vacuum Concentrator

Using centrifugal force, vacuum and controlled heat, the Acid-Resistant CentriVap Vacuum Concentrator rapidly concentrates multiple small samples containing chemicals such as 0.1 to 1% TFA, hydrochloric acid, acetic acid, hydrobromic acid, ammonium hydroxide and sodium hydroxide. Components in the vapor path are constructed of corrosion-resistant materials for long life.

• Brushed stainless steel and glacier white, epoxy-coated steel exterior with blue accents
• Glass lid; lid latch with safety sensor
• Phenol-free lid gasket
• PTFE-coated aluminum chamber with Hastelloy shaft
• 300-watt heater
• Microprocessor-controlled programming for run time from 1 to 999 minutes, heat from OFF to HI (100°C) in one degree increments, and heat time from 1 to 999 minutes; Memory stores 1 to 9 programs
• LCD for display of program number, actual and set point temperature, heater time remaining, and run time remaining
• Control panel with RUN/STOP button, PREHEAT button, set point SELECT button, increase/decrease buttons, and 3 Quick-Start buttons
• Centrifugal motion is provided by a brushless motor capable of achieving up to 1725 rpm
• Quick-Stop System to stop vacuum pump, open valve to bleed air into the chamber and stop the rotor within seconds after time expires or RUN/STOP button is pressed
• Automatic vacuum release valve
• Built-in vacuum delay allows rotor to achieve speed before applying vacuum
• Audible alarm to signal completion of set point run time
• 1/2 in. O.D. aluminum hose fitting for connection to vacuum tubing (Vacuum pump is not included)
• Vacuum port with quick disconnect fitting for 1/4 in. I.D. tubing
• 115 volt electrical receptacle on the back to connect accessory vacuum pump to the system
• 6.5 ft., 3-wire cord with NEMA 5-15 plug
• Dimensions with closed lid (W x D x H): 14.7 x 19.3 x 11.7 in.
• Actual weight 45 lbs
• Shipping weight 65 lbs

Compliance:
• UL 3101-1/61010-1
• CAN/CSA C22.2 No. 110.1

Required Accessories (not included):
• Diaphragm or Rotary Vane Vacuum Pump
• CentriVap Cold Trap if using a Rotary Vane Vacuum Pump
• Rotors
• Sample tubes

Optional Accessories:
• CentriZap Strobe Light
• Vacuum Controller
• Laboratory Carts
Image(s) are representative of the product group and not necessarily the individual product.