Thermo Scientific™ Barnstead™ Pacific TII Water Purification Systems

Convert tap water into Type 2 (15 to 10 M.cm) high purity water with the automatic and cost-efficient Thermo Scientific™ Barnstead™ Pacific TII Water Purification System. This system supports daily requirements from 20 to 200 liters. Remove approximately 98% of inorganic ions and 99% of all dissolved organic substances as well as microorganisms and particles with the high performance reverse osmosis membrane. All systems have a built-in wall bracket and include an RO membrane, a high purity water cartridge, pressure regulator, and UV lamp where applicable.

• Five system options with permeate flows of 3, 7, 12, 20, or 40 L/hr
• Future system upgrades accommodate greater capacities to meet growing water demands
• Space-saving design permits benchtop installation or wall mounting with integrated mounting bracket
• Microprocessor controlled for automatic operation with continuous monitoring of all critical parameters
• Automatic return to operating mode ensures recirculation during standstill periods
• Optional UV lamp prevents biological contamination
• Resistivity/conductivity clearly displayed on large back-lit control panel that tilts for optimum viewing
• Status of current operating mode clearly indicating production, stand-by, cleaning modes
• Reservoir fill-level shown as %
• System parameters are code-protected to prevent accidental changes to set points
• Optional printer (Cat. No. 339-39280) connects to RS-232 port for data recording and traceability
• Cell constant of 0.01 cm-1 ensures precise conductivity measurements
• Temperature compensation for the conductivity measurement has an accuracy of +/- 0.1°C (in conformity with USP 645)
• Gain increased flexibility by adding an optional hand dispenser with 3 meter cord (Cat. No. 889-79857) which connects to tank. Use only with a tank equipped with a pressure pump (Cat. No. 889-76366, 889-76368, or 889-76370).
• Warranty: 1 year, parts and labor

Specifications:
• Operating pressure min./max.: 29 to 87 psi (2 to 6 bar)
• Electrical requirements: 90-240V, 50/60 Hz
• Power consumption: 0.08 kW
• Feed water connector: ³/₄ in. NPT
• Dimensions (W x D x H): 14.6 x 13 x 23.7 in.
• Ambient temperature: 2 to 35°C
Image(s) are representative of the product group and not necessarily the individual product.

System with UV Lamp
Flow Rate (L/hr.): 7

System
Flow Rate (L/hr.): 7

System with UV Lamp
Flow Rate (L/hr.): 12

System
Flow Rate (L/hr.): 12

System with UV Lamp
Flow Rate (L/hr.): 20

System
Flow Rate (L/hr.): 20