Thermo Scientific™ Barnstead™ LabTower™ RO Water Purification Systems - Each

Convert tap water into reverse osmosis (RO) water with integrated 100L storage using the Thermo Scientific™ Barnstead™ LabTower™ RO Water Purification System, which allows the user to easily read parameters with an ultra-modern controller. Mounted on casters, this compact system is an ideal pure water supply for any laboratory. The system is well-suited as a feed water source for dishwashers, autoclaves and general laboratory use. Resistivity/conductivity is clearly displayed on a large back-lit control panel that tilts for optimum viewing. A built-in pretreatment unit, consisting of a hardness stabilizer for protection of the reverse osmosis module from hardness formers, and an activated carbon/5µm combi-cartridge protects the system against free chlorine and particles, ensures the long service life of downstream purification stages. All systems include an RO membrane(s), integrated 100 L reservoir, and pressure regulator.

• An ultra-modern microprocessor control provides easy-to-read system parameters
• Completely drainable integrated 100L high-purity water reservoir has a low-noise pressure booster as a standard component
• Mounted on casters, the compact LabTower RO system is an ideal pure water supply for any laboratory
• Ideally suited as a feed water source for dishwashers, autoclaves and general laboratory use
• Systems can be upgraded later to accommodate growing water capacity demands
• 100 L RO water storage in a high-purity polyethylene PE opaque reservoir
• Adjustable reservoir volume can be programmed for times of low demand
• Resistivity/conductivity clearly displayed on large back-lit control panel that tilts for optimum viewing
• Status of current operating mode clearly indicating production, stand-by, cleaning or disinfection modes
• Reservoir fill-level shown as %
• System parameters are code-protected to prevent accidental changes to set points
• LabTower RO has been developed to fulfill GLP requirements
• Recorded and traceable data can be obtained by print out via the RS-232 interface and accessory printer (Cat. No. 339-39280)
• Highly qualified and precise measurement of the conductivity is ensured by the cell constant of 0.16 cm-1

Specifications:
• Operating pressure min./max.: 29 to 87 psi (2 to 6 bar)
• Electrical requirements: 90-240V, 50/60 Hz
• Power consumption: 0.25 kW
• Feed water connector: ³/₄ in. NPT
• Dimensions (W x D x H): 17.7 x 22.8 x 59 in.
• Ambient temperature: 2 to 35°C
Image(s) are representative of the product group and not necessarily the individual product.

Flow Rate (L/hour): 40