FREEZE DRYERS

Provide connection of ampules to drying chambers and manifolds. Permits attachment of three ampules to a single valve port. Ampules are attached using Ampule Valve Adapters or 1/8 in. surgical tubing (not provided). Cavity in adapter body can be filled...

Provide connection of ampules to drying chambers and manifolds. Connect ampules to valve ports or stainless steel stems. Ten per package.Image(s) are representative of the product group and not necessarily the individual product.

Oxygen/Natural Gas Sealing Torch, specifically designed for flame sealing freeze dry ampules. Seals all types of heat-resistant glass. Connects to natural gas, butane or propane and oxygen with 1/4 in. I.D. hose connectors.Image(s) are representative of...

Labconco Ampules are fabricated of highest quality borosilicate glass for strength and durability. Ampules are sold in packages of 100.Image(s) are representative of the product group and not necessarily the individual product.Pre-Scored Flat Bottom...

Seal Crimpers secure aluminum seals on serum bottles.Image(s) are representative of the product group and not necessarily the individual product.For Seal Size (mm): 13For Seal Size (mm): 20

Aluminum seals for serum bottles.• 13 mm seals (Cat. No. 346-17413) fit 2 mL and 3 mL serum bottles• 20 mm seals (Cat. No. 346-17416) fit 5, 10, 20, 30, 50, 100 and 125 mL serum bottlesImage(s) are representative of the product group and not...

Rubber split stoppers fit Serum Bottles. • 13 mm stoppers (Cat. No. 346-17407) fit 2 mL and 3 mL serum bottles• 20 mm stoppers (Cat. No. 346-17410) fit 5, 10, 20, 30, 50, 100 and 125 mL serum bottlesImage(s) are representative of the product...

Perfect for long term storage of freeze dried samples. Labconco Serum Bottles are specifically designed for lyophilization applications hold small samples for batch drying on a tray. They may also be connected to valve ports on drying chambers and...

Drying Chambers provide a means to attach flasks to your freeze dryer or contain samples in bulk. 115V, 50/60 Hz. For use with 6L, 12L and 18L Freeze Dryers.Image(s) are representative of the product group and not necessarily the individual product.

Adapters are required to attach Lyph-Lock Flasks to freeze dry valve ports. Manufactured from borosilicate glass.Image(s) are representative of the product group and not necessarily the individual product.Standard Taper Joint: 19/38For Valve Size (in.):...

A complete Lyph-Lock Flask includes a glass top and bottom and a rubber ring. Flasks should be filled no more than one-third of their volume so that maximum surface area is achieved and efficient lyophilization is assured. Adapters are required to attach...

• 1000 (10 packages of 100)• 1 in. diameter (28 mm)• Pore size 17 micronsImage(s) are representative of the product group and not necessarily the individual product.

Manifold includes 20 neoprene valves with molded plastic knobs that accommodate both 1/2 in. and 3/4 in. adapters for connection of flasks. Manifolds are made of type 304 stainless steel and mount atop FreeZone Freeze Dry Systems. Compatible with...

Drying Chambers provide a means to attach flasks to your freeze dry system or contain samples in bulk. The 16-Port Drying Chamber includes 16 neoprene valves that accommodate both 1/2 in. and 3/4 in. adapters for connection of flasks. It is compatible...

Drying Chambers provide a means to attach flasks to your freeze dry system or contain samples in bulk. The 12-Port Drying Chamber includes 12 neoprene valves that accommodate both 1/2 in. and 3/4 in. adapters for connection of flasks. It is compatible...

Three removable, 10 in. diameter aluminum shelves with 1/4 in. rim. Shelves slide into stainless steel support. Includes three rubber feet. Removable shelf design allows for flexible shelf height spacing. Shelves can be placed in freezer to pre-freeze...

Five removable, 10 in. diameter aluminum shelves with 1/4 in. rim. Shelves slide into stainless steel support. Includes three rubber feet. Removable shelf design allows for flexible shelf height spacing. Shelves can be placed in freezer to pre-freeze...

Stainless steel Tube Holder for freeze dry systems. Holder accommodates up to four (50 mL) 30 mm x 115 mm tubes and secures them in an upright position. Fits inside a 750 mL or larger Fast-Freeze Flask (tubes and glassware not included).Image(s) are...

A complete Fast-Freeze Flask consists of one silicone rubber top, glass bottom and a supply of filter paper. High strength borosilicate glass withstands extreme temperatures and high vacuum. Amber-colored glass protects light-sensitive samples. Flask...

Powder-coated steel cart supports FreeZone benchtop and Triad Freeze Dryers during use, storage, or transportation. Lower shelf provides space for vacuum pump. Casters provide mobility. Maximum weight capacity of 450 lbs.Image(s) are representative of...

These Ampule Pods provide connection of ampules to drying chambers and manifolds. Pods attach to a single valve port and accommodate up to 15 ampules for simultaneous freeze drying. Polypropylene base has 15 tubing ports, each with silicone tubing for...

Stainless steel lids with 3 in. diameter center hole. Stainless steel provides additional protection from solvents and corrosives that attack acrylic, such as acetonitrile. Includes neoprene gasket. Replacement lids fit on drying chambers and FreeZone...

Lid replaces the lid to the built-in drying chamber on FreeZone 4.5 Liter Freeze Dry Systems to permit use of the Heated Drying Chamber (Cat. No. 336-21913), 4-Port Manifold (Cat. No. 346-28361), 20-Port Manifold (Cat. No. 346-17191), or Clear Chamber...

14 in. diameter acrylic lid has a 3 in. diameter hole for direct accessory connection. Includes neoprene gasket. Lid is compatible with FreeZone Drying Chambers, 4- & 8-Port Manifolds, Clear Chambers, and Heated Product Shelves. For use with FreeZone...

The 12-Port Drying Chamber with PTFE is made of type 304 stainless steel with a corrosion-resistant PTFE-coated interior. Includes 12 neoprene valves with plastic knobs that accommodate both 1/2 in. and 3/4 in. adapters for connection of flasks, an...

Holder accommodates up to 9 each (15 mL) 17 mm x 120 mm tubes and secures them in an upright position. Fits inside a 750 mL or larger Fast-Freeze Flask (tubes and glassware not included). Stainless Steel.Image(s) are representative of the product group...

Powder-coated steel holder accommodates flasks of any size. Manually adjust angle from 5° to 35°. Excellent for pre-freezing flasks for greater surface area. Flask not included. Dimensions (W x D x H): 4.5 x 10.4 x 6.7 in. (11.4 x 26.4 x 17 cm)...

Type 304 stainless steel round test tube rack holds up to 104 each 12 to 13 mm diameter tubes in an upright position. Includes stainless steel bottom. Ideal for use with with heated or non-heated round Product Shelves. Tray Dimensions (Dia. x H): 9 x 2.5...

Type 304 stainless steel rectangular test tube rack holds up to 70 each 12 to 13 mm diameter tubes in an upright position. Includes stainless steel bottom. Ideal for use with the FreeZone Tray Dryer, Bulk Tray Dryer or Stoppering Tray Dryer. Tray...

Short, 12 in. diameter acrylic chamber for all FreeZone Freeze Dryers. Provides visibility for bulk freeze drying. Accommodates Tall Product Shelves (Cat. No. 346-28388). Includes aluminum lid with eight neoprene valves with plastic knobs for use with...

Tall, 12 in. diameter acrylic chamber for all FreeZone Freeze Dryers. Provides visibility for bulk freeze drying. Accommodates Tall Product Shelves (Cat. No. 346-28391). Includes aluminum lid with eight neoprene valves with plastic knobs for use with...

Short, 12 in. diameter acrylic chamber fits all FreeZone Freeze Dryers. Provides visibility for bulk freeze drying. Accommodates Short Product Shelves (Cat. No. 346-28388). Includes clear acrylic lid with gasket, vacuum release valve and pass through for...

Solid aluminum base tightly holds microplates. Eliminates the air gap on the bottom of the plate, providing excellent heat transfer to the microplate. It gives temperature stability to small samples that are susceptible to meltback. Microplate not...

Stainless steel tray to contain liquids or bulk items for pre-freezing or bulk drying. Makes sample loading and unloading as well as cleaning easy. For use with the FreeZone Triad (Cat. No. 416-10001), FreeZone Stoppering Tray Dryer (Cat. No. 346-27512)...

Manifold with eight neoprene valves with plastic knobs that accommodate both 1/2 in. and 3/4 in. adapters for connection of flask. Includes one latching pin. Manifolds are made of type 304 stainess steel and mount atop FreeZone Freeze Dry Systems...

Manifold with 14 neoprene valves with plastic knobs that accommodate both 1/2 in. and 3/4 in. adapters for connection of flask. Includes one latching pin. For use with FreeZone Console Freeze Dryers only. Manifolds are made of type 304 stainess steel and...

Manifold with 28 neoprene valves with plastic knobs that accommodate both 1/2 in. and 3/4 in. adapters for connection of flask. Includes one latching pin. For use with FreeZone Console Freeze Dryers only. Manifolds are made of type 304 stainless steel...

Fast-Freeze Flasks attach with adapters to valve ports on Labconco Drying Chambers and Manifolds. Amber-colored glass bottoms only. Fast-Freeze Flasks are compatible with any brand freeze dryer that has 1/2 in. or 3/4 in. diameter valve ports. Tops,...

Manifold includes four neoprene valves with molded plastic knobs that accommodate both 1/2 and 3/4 in. adapters for connection of flasks. Manifolds are made of type 304 stainless steel and mount atop FreeZone Freeze Dry Systems. Image(s) are...

Labconco® FreeZone® Legacy™ 2.5 L Benchtop Freeze Dryers are designed for light aqueous sample loads and is capable of removing 2 liters of water in 24 hours and holding 2.5 liters of ice before defrosting. For aqueous samples only. Not...