AIR MONITORS

• Triple-bagged and gamma-irradiated contact plates ensure the highest level of safety for isolators and cleanrooms• Maximum safety for sampling dry, sanitized surfaces in critical areas• Suitable for air monitoring with Air Monitoring...

• ICR/ICRplus Settle Plates are produced under aseptic conditions• Gamma-irradiated and triple bagged• Suitable for passive air monitoring or as disposables for active air monitoring using MAS Air Samplers• Suitable for personnel...

• Accessories for use with TRIO.BAS Air Samplers• Cat. No. 341-86692: Software download to transfer data to PC (alternative to Android APP BAS) • Cat. No. 651-10022: Android APP BAS to transfer data on Smartphone / Tablet and then by...

The Basic Air is a microbial air sampler that offers fundamental features. It was designed for users that dont need connectivity to barcode, or duplicate simultaneous testing capability (no slave unit). This is an economy version for basic air sampling...

Induction battery charger base station for use with TRIO.BAS DUO Biological Air Samplers (sold separately). Units simply rest on top of the base station and begin charging.• 100/240 VCA • 50/60 Hz • 35W USA Variant Plug Image(s) are...

• Hard carrying case for all models of TRIO.BAS Biological Air SamplersImage(s) are representative of the product group and not necessarily the individual product.

• Soft canvas carrying case• 37 x 16 x 22 cm• For use with TRIO.BAS Mini and MONO Air SamplersImage(s) are representative of the product group and not necessarily the individual product.

• Technopolymer stand-up vertical holder for hands-free sampling on surface or tripod• For use with TRIO.BAS MONO and DUO Air Samplers• 15 x 11 x 9 cmImage(s) are representative of the product group and not necessarily the individual...

• Two aspirating heads for sampling on separate plates to determine bacterial and yeast/mold counts (Aspirating heads not included, order separately)• Save sample time by doubling air volume• Suitable for contact plates or standard agar...

15 x 60 mm Contact Plates filled with TSA (Trypic Soy Agar). For the cultivation of microorganisms from environmental surfaces. Irradiated plates are triple bagged. Image(s) are representative of the product group and not necessarily the individual...

• Irradiated aspirating heads for use with TRIO.BAS Biological Air Samplers• Ready-to-use in cleanroom• Individually packaged• Certification of sterility providedImage(s) are representative of the product group and not necessarily...

• 15 x 60 mm Contact plates filled with Malt Extract Agar with Lecithin and Tween for the cultivation and enumeration of fungi.†This item is perishable and must ship on ice.Image(s) are representative of the product group and not necessarily...

• Polycarbonate aspirating heads for use with TRIO.BAS Biological Air Samplers• Autoclavable• Can be sprayed with disinfectant• DurableImage(s) are representative of the product group and not necessarily the individual product.

15 x 60 mm Contact Plates filled with Sabouraud Dextrose Agar (SabDex) for the cultivation of fungi. Irradiated plates are triple bagged.Image(s) are representative of the product group and not necessarily the individual product.Sterility:...

• 15 x 100 mm Petri plates filled with Sabouraud Dextrose Agar (SabDex)• For the cultivation of fungi• Irradiated plates are triple baggedImage(s) are representative of the product group and not necessarily the individual product.Fill...

Stainless steel bayonet aspirating heads for use with TRIO.BAS Biological Air Samplers. Available in RODAC Plate and 90 mm Petri Dish versions.Image(s) are representative of the product group and not necessarily the individual product.Plate Style:...

• Protects the aspirating chamber of TRIO.BAS Biological Air Samplers• Autoclavable• Can be sprayed with disinfectants• Lasts the lifetime of the equipmentImage(s) are representative of the product group and not necessarily the...

• Aspirating head quick bayonet fixing system (Aspirating head not included, order separately)• Ergonomic and balanced design• Suitable for contact plate or standard agar plates (Petri dish) • Available in 100 or 200 liters per...

15 x 100 mm Petri plates filled with TSA (Trypic Soy Agar). General growth medium for the detection and enumeration of microorganisms from environmental sources.†This item is perishable and must ship overnightImage(s) are representative of the...

• Stainless steel vertical holder for table, cart, or tripod• For use with TRIO.BAS Mini and Mono Biological Air Samplers• 12 x 11 x 9 cm• Vertical Hook requires the purchase of the Knob (Cat. No. 651-10643)Image(s) are...

• Tryptic Soy Agar (TSA) w/Lecithin & Tween• 15 x 60 mm plates for finger-tip and surface monitoring• Contact agar plates are pressed onto the surface or glove fingertips, incubated, and colonies are counted• Must ship on...

• Tryptic Soy Agar (TSA) plates• Used for passive or active air sampling†Additional shipping will apply to all cold shipmentsImage(s) are representative of the product group and not necessarily the individual product.Size (mm): 15 x...

Adapters for gelatin filter disposables and BACTair culture media plates to MD8 airscan and Airport MD8 air samplers. The adapter can be locked onto the air sampler inlet or the hose connector, by turning it clockwise, either before or after the filter...

AirPort MD8 is an air sampler for the pharmaceutical industry, biotechnology, food and beverage industry, for hospitals, and for measurements within the scope of environmental protection and occupational safety. Battery operated and portable so it can be...

The MD8 airscan air sampler, together with gelatin membrane filter disposables (adapter and gelatin membranes sold separately), constitutes an airborne microorganism sampling system for accurate, reproducible and quantitative detection of airborne...

The Aluminum Stack consists of a middle part, 10 numbered filter holders and 2 end caps. The stack is first sterilized (by 180 DEG C dry heat, 2 hours), and then equipped with the filters under sterile conditions (LF cleanbench). The prepared filter...

BACTair™ culture media plates are ready-to-connect pre-filled agar media plates for microbiological air monitoring with the AirPort MD8 air sampler (impaction method). The system allows impaction onto the culture media plate, since the plate itself...

The Calibration Unit is a portable flow rate measuring device that was specially developed for flow rate calibration of the MD8 airscan (Cat. No. 346-28334) and AirPort MD8 (Cat. No. 346-27719) air samplers. Specifications:• Measuring range: 1...

For connecting the hose to the MD8 airscan. Press the connecting piece (hose/MD8 airscan) (Cat. No. 656-10049) against the sampled air inlet of the MD8 airscan and turn it clockwise. Fit one end of the hose (e.g., Catalog No. 626-10122) onto the hose...

For the monitoring of isolators with MD8 airscan, it is recommend that you use stainless steel accessories such as adapters (DN30, Cat. No. 656-10037), connectors for tri clamp (Cat. No. 346-28352 or 346-28355) and the filter holder for gelatin filter...

AC Adaptor for Heat Stress Monitor (Cat. No. 350-98398), Datalogging Heat Stress Monitor (Cat. No. 350-98401), Indoor Air Quality Monitor (Cat. No. 350-98728), Datalogging Indoor Air Quality Monitor (Cat. No. 350-98731), and Datalogging Indoor Air...

Portable measurement and datalogging of Indoor Air Quality (IAQ) parameters: Air Temperature, RH, CO2, Dew Point and Wet Bulb. Poor air quality may cause tiredness, inability to concentrate, and even illness (i.e., Sick Building Syndrome). This...

Reads air velocity and temperature and functions as a type K or J thermometer. Records data onto standard SD memory cards (like a digital camera). When full, simply exchange SD cards for unlimited data storage. The removable SD card is easy to transport...

Monitor Indoor Air Quality (IAQ) in public spaces with potentially high levels of CO2 (carbon dioxide). Poor air quality may cause tiredness, inability to concentrate, and even illness (i.e., Sick Building Syndrome). The same measurement parameters can...

Visible across a large room. Continually monitors the primary IAQ (Indoor Air Quality) parameters: Air Temperature, RH and CO2. Poor air quality may cause tiredness, inability to concentrate, and even illness (i.e., Sick Building Syndrome). This...

Easily portable and designed for simple one-hand operation. Reads oxygen in air for environmental studies, IAQ, bio-technology (for oxygen incubators and anaerobic cultivators), food storage and refrigeration, and testing fire alarm and fuel cell systems...

This unique instrument combines the features of an anemometer and a psychrometer. Measures: air speed, air volume, BTU (British Thermal Units), air temperature, dew point, wet bulb, and humidity. Excellent for HVAC, IAQ, and environmental work. Auto...

Reads air velocity and temperature, and functions as a type K or J thermometer. Records data onto standard SD memory cards (like a digital camera). When full, simply exchange SD cards for unlimited data storage. The removable SD card is easy to transport...

• One hand operation • Updated instantaneously • Features a memory key One-hand operation anemometer displays air velocity and temperature simultaneously. Ease of operation in hoods or outdoors makes this an ideal instrument. Unit is...

• Aspirating head with quick bayonet closure system for easy manipulation (aspirating heads are required and sold separately)• Flexibility for many type of commercial plates (RODAC or Petri)• Suitable for contact plates or standard agar...