LAB WASHERS

LAB WASHERS

  • Choose Options

    10-Pin Labware Insert - Each

    Labconco

    $177.00
    Pins hold a variety of wider-mouth flasks, beakers and other labware in inverted position. Retainer Top (Spectrum Catalog No. 346-14659) is recommended for use with plastic and lightweight glassware (Top sold separately). Type 304 stainless steel pins...
    346-14653
    $177.00
    Choose Options
  • Choose Options

    Labconco Bulk Tube Insert - Each

    Labconco

    $582.40
    Quick loading. For vertically-positioned test tubes. Holds up to 600 each 13 mm tubes or 244 each 20 mm tubes. Bottom, grate size 0.38 in. (9.5 mm), allows water to drain from inverted tubes. When insert is less than fully loaded, the divider may be...
    146-10711
    $582.40
    Choose Options
  • Choose Options

    Labconco* 10-13 mm O.D. Test Tube Holder - Each

    Labconco

    $258.65
    Accommodates 150 each 10-13 mm O.D. tubes. Test Tube Holders are add-on accessories to the Lower Test Tube Spindle Rack. The Holder keeps tubes upright. Constructed of Type 304 stainless steel.Image(s) are representative of the product group and not...
    146-10705
    $258.65
    Choose Options
  • Choose Options

    Labconco* 20-25 mm O.D. Test Tube Holder - Each

    Labconco

    $258.65
    Accommodates 75 each 20-25 mm O.D. tubes. When tubes are 150 mm or shorter, Holders may be stacked. Washers using stacked Holders are not compatible with an upper rack. Test Tube Holders are add-on accessories to the Lower Test Tube Spindle Rack. The...
    146-10708
    $258.65
    Choose Options
  • Choose Options

    Labconco* B.O.D. Bottle Insert - Each

    Labconco

    $217.30
    Made of Type 304 stainless steel, this basket insert fits in standard open racks and spindle racks. Holds 18 bottles. Grid size is 70 x 70 mm. Dimensions (W x D x H) is 19.5 x 8.8 x 6.0 in. (50 x 22 x 15 cm).Image(s) are representative of the product...
    626-10128
    $217.30
    Choose Options
  • Choose Options

    Labconco* FlaskScrubber Upper Spindle Racks

    Labconco

    $70.20
    Upper Spindle RacksConstructed of Type 304 stainless steel. Include side release latches, 30 removable spindles, 30 adjustable height clips, 10 small spindles, 15 plastic glassware holders, tool to remove spindles, 30 nylon plugs, and wash arm. Spindles...
    346-16603
    $70.20
    Choose Options
  • Choose Options

    Labconco* FlaskScrubber Vantage Series* - Each

    Labconco

    $18,194.80
    Labconco Freestanding FlaskScrubber Vantage Series Laboratory Glassware Washer, with type 304 brushed stainless steel interior and exterior, viewing window and 25 watt interior light, sanitizes glassware with 199 DEG F (93 DEG C) water to sanitize...
    346-27632
    $18,194.80
    Choose Options
  • Choose Options

    Labconco* FlaskScrubber*

    Labconco

    $11,143.60
    FlaskScrubber washers include a lower stainless steel spindle rack with 36 detachable spindles, 18 glassware holders, 36 height adjustment clips and 10 additional interchangeable small spindles. Washers are designed primarily for narrow-neck glassware...
    346-27596
    $11,143.60
    Choose Options
  • Choose Options

    Labconco* Laboratory FlaskScrubber Glassware Washers

    Labconco

    $11,143.60
    The Labconoc FlaskScrubber 33 Undercounter Washer includes stainless steel 36-spindle lower rack; purified water pump; steam generator; forced air drying up to 250 mins; stainless steel tank, wash arms and door. 7 factory setingst/2 user set programs.The...
    496-48469
    $11,143.60
    Choose Options
  • Choose Options

    Labconco* Laboratory SteamScrubber 33

    Labconco

    $8,616.40
    The Labconco SteamScrubber 33 Undercounter Washer includes upper and lower standard stainless steel racks; purified water pump; steam generator; forced air drying up to 250 mins; stainless steel tank, wash arms and door. 7 factory settings/2 user set...
    496-48463
    $8,616.40
    Choose Options
  • Choose Options

    Labconco* ScrubAir* Pipette Washers/Dryers

    Labconco

    $3,260.40
    The ScrubAir™ Pipette Washer/Dryer uses water, detergent and compressed air to wash, rinse and dry volumetric pipettes. This automatic washer/dryer can accommodate pipettes ranging in size from 0.135 in. stem dia. x 7.5 in. length (3.4 x 190.5 mm)...
    346-28094
    $3,260.40
    Choose Options
  • Choose Options

    Labconco* ScrubAir* Spindle Kit - Each

    Labconco

    $312.70
    ScrubAir™ Spindle Kit add versatility by permitting small test tubes or vials, 7 mm I.D. or larger, to be washed in the ScrubAir. Kit contains:• 24 polystyrene plastic spindles with caps, 5 mm O.D.• Stainless steel test tube rack to...
    346-28106
    $312.70
    Choose Options
  • Choose Options

    Labconco* SteamScrubbers*

    Labconco

    $8,616.40
    Features include a LCD for customizing cycles, monitoring water temperature and cycle progress; a water recirculation rate of 96 gal/min (363 liters/min) on 115 V and 230 Volt 50 Hz models and 112 gal/min (424 liters/min) on 230 Volt 60 Hz models for...
    346-27620
    $8,616.40
    Choose Options
  • Choose Options

    Labconco* Upper Spindle Racks

    Labconco

    $2,303.60
    Constructed of Type 304 stainless steel. Include side release latches, 30 removable spindles, 30 adjustableheight clips, 10 small spindles, 15 plastic glassware holders, tool to remove spindles, 30 nylon plugs, and wash arm. Spindles may be removed and...
    346-27653
    $2,303.60
    Choose Options
  • Choose Options

    Labconco* Utensil Basket - Each

    Labconco

    $217.30
    For miscellaneous labware such as stoppers, spatulas and other small lightweight items that will not pass through No. 4 mesh sides and bottom. Retainer top is required and included. Type 304 stainless steel. Dimensions (W x D x H): 8 x 8 x 4 in. (20 x 20...
    336-16537
    $217.30
    Choose Options
  • Choose Options

    Labconco* Utensil Holder - Each

    Labconco

    $333.90
    For spatulas, spoons, scoops and other miscellaneous utensils. Utensils fit vertically in four compartments. Type 304 stainless steel insert fits in upper and lower standard open racks and lower spindle racks.• Compartment dimensions (W x D x H): 2...
    336-16963
    $333.90
    Choose Options
  • Choose Options

    Pipet Inserts - Each

    Labconco

    $508.80
    Permit direct-injection cleaning of pipets. Self-sealing silicone check valves allow washing of partial or full loads. Type 304 stainless steel. Eight-pipet holder accommodates eight pipets, 1 ml to 10 ml, and includes one 1.25 in. mounting spindle...
    336-16846
    $508.80
    Choose Options