GAS CHROMATOGRAPHY

GAS CHROMATOGRAPHY

  •
    Quick view

    Corning® PYREX® Arsine Generator

    $62.25
    Designed for arsenic determination by the silver diethyldithiocarbramate photometric method. Meets A.P.H.A. Standard 104A, ACS/USP and EPA specifications. Fabricated from PYREX borosilicate glass. Joint on 125 ml flask is TS 24/40 and ball and socket...
    928-10040
    $62.25
    Quick view
  • Quick view

    GC Tool Kits for Thermo Scientific* Instruments - Each

    $746.30
    Maintain the performance of your GC system with Thermo Scientific GC Tool Kits. Wrench sets, a flashlight, brushes, a minidrill set, and other tools are included. Kits are available for Thermo Scientific GC and Agilent GC instruments.Includes: Capillary...
    475-63547
    $746.30
    Quick view
  • Quick view

    Globe Scientific Bulb for Capillary Tubes

    $20.85
    Pipette bulbs are designed for use with all Globe capillary tubes. They help to expel the blood from the capillary tube (if needed). They are also used when drawing blood directly from a 13 or 16 mm blood collection tube (instead of directly from a...
    671-11452
    $20.85
    Quick view
  • Quick view

    Globe Scientific Glass Micro-Hematocrit Capillary Tubes

    $54.90
    Glass capillary tubes are designed for both safe blood collection as well as accurate micro-hematocrit determinations. Precision molded, they provide excellent sample retention during centrifugation. In addition, the tubes fill rapidly without affecting...
    631-11089
    $54.90
    Quick view
  • Quick view

    Globe Scientific Glass Pre-Calibrated Micro

    $178.80
    Precalibrated glass capillary tubes are marked with a black calibration line at 60 mm from one end. The calibration line establishes a uniform blood column length. Treated with ammonium heparin, these tubes are designed for both safe blood collection as...
    631-11098
    $178.80
    Quick view
  • Quick view

    Globe Scientific Plastic Micro-Hematocrit Capillary Tubes

    $172.55
    Globe Scientifics plastic micro hematocrit capillary tubes are completely unbreakable. They eliminate the risk of injury and contamination associated with glass tubes due to breakage. Plastic micro hematocrit capillary tubes comply with FDA, NIOSH, CDC...
    671-11461
    $172.55
    Quick view
  • Quick view

    Hamilton* 3-Layer Septa

    $15.20
    Three Layer Septa is made of preconditioned silicone rubber and is 3.81 mm (0.150 in.) thick. The average life of these septa is up to 100 injections with a 26s gauge needle. The maximum operating temperature is 200° C.Image(s) are representative of...
    475-38179
    $15.20
    Quick view
  • Quick view

    Hamilton* High Temperature Septa

    $23.40
    High Temperature Septa is made of preconditioned PTFE/silicone rubber and is 3.175 mm (0.125 in.) thick. The average life of these septa is up to 100 injections with a 26s gauge needle. The maximum operating temperature is 212 DEG C.Image(s) are...
    475-37030
    $23.40
    Quick view
  • Quick view

    J.G. Finneran Dispersive SPE Kits, 15 mL Centrifuge Tubes

    $126.00
    Phase 2 Dispersive SPE Kit, 15 mL Centrifuge tubes.Phase 2: Dispersive SPE Clean-up. Select the Extraction Kit depending on the type of food and method to be used. One Aliquot (6 or 8 mL) of sample from Phase 1 is added to the 15 mL centrifuge tube that...
    474-10030
    $126.00
    Quick view
  • Quick view

    J.G.Finneran* Sample Extraction Tubes

    $146.00
    Phase 1 Extraction Kit, 50 mL Centrifuge Tubes for Sample ExtractionPhase 1: Extraction. Select the Extraction Kit depending on the type of food and method to be used. Each kit includes a 50 mL centrifuge tube containing preweighed salts, to be added...
    474-10069
    $146.00
    Quick view
  • Quick view

    Kontes* Arsine Generator

    $37.95
    Designed for multiple arsenic determinations. A sample containing arsenic is placed within the flask and converted to arsine gas. Hydrogen sulfide is removed from the sample as the gas is generated by lead acetate-impregnated glass wool packed within the...
    985-15133
    $37.95
    Quick view
  • Quick view

    Kontes* Spherical Joint Pinch Clamp

    $32.80
    Replacement Spherical Joint Pinch Clamp for Kontes Linear Solvent Recovery System for KD Evaporative Concentrators• Used to assemble component parts of Spherical joints and O-ring connector arms. • Sizes 12-A, 18-A and larger have a...
    985-33601
    $32.80
    Quick view
  • Quick view

    PerkinElmer* 2 mL Vials

    $29.10
    Vials are manufactured from Type I Borosilicate Glass, which meets all USP, JP, and EP Pharmacopeia requirements. The glass performs excellent at high temperatures and is chemical resistant to acidic, neutral and alkali solutions. All vials are packed in...
    470-45134
    $29.10
    Quick view
  • Quick view

    PerkinElmer* Advanced Green Septa

    $33.60
    The Advanced Green septum was created to combine significantly longer injection life, low bleed and low injection port adhesion. The result is a general use green septum you can use for all your critical analyses. Advance Green septa are rated to...
    470-45056
    $33.60
    Quick view
  • Quick view

    PerkinElmer* Air Toxics ATD Sample Tubes

    $1,123.20
    The Air Toxics is conditional at 350°C. PerkinElmer recommends a maximum temperature of 400°C for this sample tube with a desorption temperature of 330°C. The approximate analyte volatility range is n-C3 to n-C12 and the typical analytes for...
    470-49739
    $1,123.20
    Quick view
  • Quick view

    PerkinElmer* Assembled Caps for Headspace Vials

    $99.35
    • Caps are conveniently preassembled for ease-of-use and packed in clean Mylar bags to reduce the risk of contamination• Septa are lot tested for impuritiesImage(s) are representative of the product group and not necessarily the individual...
    470-78172
    $99.35
    Quick view
  • Quick view

    PerkinElmer* Autosampler Starter Kit - Each

    $840.30
    The PerkinElmer Autosampler Starter Kit contains everything you need to run the Clarus GC autosampler under one convenient part number. This kit contains: • 5 µl syringe, metal plunger PTFE tipped seal, 0.63 mm OD needle• 2 ml crimp top...
    470-48470
    $840.30
    Quick view
  • Quick view

    PerkinElmer* Autosampler Syringes

    $135.70
    Syringes from PerkinElmer are individually inspected for accuracy and performance. Recommended autosampler syringes are available in 0.5, 5.0 and 50 µl capacities. For routine analyses, the metal plunger in barrel with PTFE-tipped seal is the...
    470-44507
    $135.70
    Quick view
  • Quick view

    PerkinElmer* Basic Tool Kit - Each

    $244.85
    Tools come in tool box for easy storage and use. Kit Includes• Open-end wrench set (6 pc)• Screwdriver set (6 pc.)• Adjustable wrench (6 in)• Chain nose pliers (narrow)• Wire cutters• Wire strippersImage(s) are...
    470-44978
    $244.85
    Quick view
  • Quick view

    PerkinElmer* Brass Back Ferrule

    $12.85
    PerkinElmer Brass Back FerrulesImage(s) are representative of the product group and not necessarily the individual product.Size (in.): 1/16Size (in.): 1/4Size (in.): 1/8
    470-43238
    $12.85
    Quick view
  • Quick view

    PerkinElmer* Brass Front Ferrule

    $14.05
    PerkinElmer Brass Front FerrulesImage(s) are representative of the product group and not necessarily the individual product.Size (in.): 1/16Size (in.): 1/4Size (in.): 1/8
    470-43532
    $14.05
    Quick view
  • Quick view

    PerkinElmer* Carbopack* B 60/80 ATD Sample Tubes

    $976.55
    The Carbopack B is conditional at 350°C. PerkinElmer recommends a maximum temperature of 400°C for this sample tube with a desorption temperature of 330°C. The approximate analyte volatility range is n-C5 to n-C12 and the typical analytes for...
    470-49814
    $976.55
    Quick view
  • Quick view

    PerkinElmer* Carbosieve* SIII 60/80 ATD Sample Tubes

    $991.10
    The Carbosieve S-III is conditional at 350°C. PerkinElmer recommends a maximum temperature of 400°C for this sample tube with a desorption temperature of 330°C. The approximate analyte volatility range is n-C2 to n-C6 and the typical analytes...
    470-49817
    $991.10
    Quick view
  • Quick view

    PerkinElmer* Carbotrap* 349 ATD Sample Tube

    $1,060.80
    The Carbotrap 349 is conditional at 350°C. PerkinElmer recommends a maximum temperature of 400°C for this sample tube with a desorption temperature of 330°C. The approximate analyte volatility range is n-C3 to n-C16 and the typical analytes...
    470-49772
    $1,060.80
    Quick view
  • Quick view

    PerkinElmer* Carbotrap* C/B ATD Sample Tubes - Each

    $1,412.30
    Stainless Steel packed thermal desorber tubes. Packing material: Carbotrap C 20/40 and Carbotrap B 20/40. Fully conditioned with brass long-term storage caps.Image(s) are representative of the product group and not necessarily the individual product.
    470-49769
    $1,412.30
    Quick view
  • Quick view

    PerkinElmer* Chromosorb* 106 ATD Sample Tubes

    $1,020.25
    The Chromosorb 106 is conditioned at 240°C. PerkinElmer recommends a maximum temperature of 250°C for this sample tube with a desorption temperature of 220°C. The tubes approximate analyte volatility range is n-C7 to n-C30 and the typical...
    470-49748
    $1,020.25
    Quick view
  • Quick view

    PerkinElmer* Click-On Inline Super ClEachn Traps

    $189.75
    PerkinElmer Click-On Inline Super Clean Purifiers reduce your maintenance system downtime. Click-on connectors can replace a trap, without introducing impurities into the system. This in turn eliminates the need to flush the system.The unique Click-On...
    470-44333
    $189.75
    Quick view