STIRRERS

STIRRERS

  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • Choose Options

    Bel-Art Scienceware Products

    Bel-Art Scienceware* Air-Operated Turbine Magnetic Stirrer - Each

    $64.90
    Driven by a low pressure air supply which eliminates the sparking hazard from electrical sources. Ideal for use in environments where potentially explosive solvent vapors are present. This compact, small-footprint stirrer only uses 3 to 8 psi (21-55kPa)...
    434-10000
    $64.90
    Choose Options
    Qty in Cart: 0
    Price:
    $64.90
    Subtotal:
  • Choose Options

    Bel-Art Scienceware Products

    Bel-Art Scienceware* Cool Stir* Large Volume Magnetic Stirrer - Each

    $2,768.30
    Effectively mixes liquid volumes from 2.5 up to 55 gallons (10 to 208 L) using inert PTFE magnetic stirring bars. A direct drive motor rotates a powerful rare earth driving magnet that couples optimally with 3 to 6 in. (76 to 160 mm) stirring bars. The...
    334-22726
    $2,768.30
    Choose Options
    Qty in Cart: 0
    Price:
    $2,768.30
    Subtotal:
  • Choose Options

    Bel-Art Scienceware Products

    Bel-Art Scienceware™ Battery Powered Magnetic Stirrer - Each

    $300.10
    Ideal for field use, inside incubators or anywhere else electricity is not convenient or simply not available. CE marked. Speed control knob for operation up to 900 RPM. Can mix up to 1 liter using stirring bars up to 2.54 cm (1 in.) in length. Two D...
    144-22720
    $300.10
    Choose Options
    Qty in Cart: 0
    Price:
    $300.10
    Subtotal:
  • Choose Options

    Bel-Art Scienceware Products

    Bel-Art Scienceware™ Microwave Stirrer - Each

    $590.10
    Converts the motion from the turntable impeller inside a microwave oven into a magnetic stirrer allowing simultaneous heating and stirring for increased efficiency. Heated stirring can improve dissolving and mixing; permits preparation of super-saturated...
    144-18631
    $590.10
    Choose Options
    Qty in Cart: 0
    Price:
    $590.10
    Subtotal:
  • Choose Options

    Bel-Art Scienceware Products

    Bel-Art* Scienceware* Spinbar* Magnetic Stirring Bar Garage - Each

    $52.20
    A variety of magnetic stirring bars from 159mm (6) to tiny 10mm (0.5) bars are simply supported on the Garage. Wires on the upper half of the rack are arranged close together, and are designed to capture smaller magnetic stir bars; larger bars are...
    334-27475
    $52.20
    Choose Options
    Qty in Cart: 0
    Price:
    $52.20
    Subtotal:
  • Choose Options

    Benchmark Scientific

    Benchmark Scientific MiniMag™ Analog Magnetic Stirrer - Each

    $106.90
    With a square footprint of under 5 inches, the MiniMag™ is the most compact stirrer in the Benchmark line. Despite its modest dimensions, the 3.4 inch square work surface accepts a wide variety of beakers, flasks, bottles and other laboratory...
    435-10040
    $106.90
    Choose Options
    Qty in Cart: 0
    Price:
    $106.90
    Subtotal:
  • Choose Options

    Caframo

    Caframo* 1 in. Pitched Blade Propeller - Each

    $39.80
    Pitched blade propeller composed of chemically inert and corrosion resistant electropolished 316L stainless steel. The 5/16 in. (8 mm) bore is compatible with all Caframo shafts. Set screws included. For low shear, high top-to-bottom pumping capacity...
    340-98089
    $39.80
    Choose Options
    Qty in Cart: 0
    Price:
    $39.80
    Subtotal:
  • Choose Options

    Caframo

    Caframo* 1 in. Propeller and Shaft - Each

    $102.75
    Blade and shaft are conveniently bundled together, able to address a variety of stirring applications. This axial flow impeller is effective for low shear mixing. The pitched blade propeller fixes to the shaft with included set screws. Blade and shaft...
    650-10543
    $102.75
    Choose Options
    Qty in Cart: 0
    Price:
    $102.75
    Subtotal:
  • Choose Options

    Caframo

    Caframo* 1<sup>1</sup>/<sub>2</sub> in. Pitched Blade Propeller - Each

    $39.80
    Pitched blade propeller composed of chemically inert and corrosion resistant electropolished 316L stainless steel. The 5/16 in. (8 mm) bore is compatible with all Caframo shafts. Set screws included. For low shear, high top-to-bottom pumping capacity...
    340-98092
    $39.80
    Choose Options
    Qty in Cart: 0
    Price:
    $39.80
    Subtotal:
  • Choose Options

    Caframo

    Caframo* 1<sup>1</sup>/<sub>2</sub> in. Straight Blade Impeller - Each

    $80.85
    Straight blade composed of chemically inert and corrosion resistant electropolished 316L stainless steel. The 5/16 in. (8 mm) bore is compatible with all Caframo shafts. Set screws included. For high shear, low viscosity mixing with moderate vortexing,...
    340-98110
    $80.85
    Choose Options
    Qty in Cart: 0
    Price:
    $80.85
    Subtotal:
  • Choose Options

    Caframo

    Caframo* 1<sup>7</sup>/<sub>8</sub> in. Dispersion Blade - Each

    $193.65
    Dispersion blade composed of chemically inert and corrosion resistant electropolished 316L stainless steel. Broken particles are dispersed by the laminar flow set up by the blade. The 5/16 in. (8 mm) bore is compatible with all Caframo shafts. Set screws...
    340-98113
    $193.65
    Choose Options
    Qty in Cart: 0
    Price:
    $193.65
    Subtotal:
  • Choose Options

    Caframo

    Caframo* 2 in. Pitched Blade Propellers

    $39.80
    2 in. (50 mm) pitched blade propellers composed of chemically inert and corrosion resistant electropolished 316L stainless steel. Set screws included. For low shear, high top-to-bottom pumping capacity with high gas injection.Specifications:• Flow...
    340-98095
    $39.80
    Choose Options
    Qty in Cart: 0
    Price:
    $39.80
    Subtotal:
  • Choose Options

    Caframo

    Caframo* 2 in. Turbine 3-Blade Propellers

    $42.05
    2 in. (50 mm) radial flow turbine 3-blade propellers. Composed of chemically inert and corrosion resistant electropolished 316L stainless steel. Set screws included. For high shear mixing with moderate vortexing.• Cat. No. 340-98101 is compatible...
    340-98101
    $42.05
    Choose Options
    Qty in Cart: 0
    Price:
    $42.05
    Subtotal:
  • Choose Options

    Caframo

    Caframo* 2<sup>1</sup>/<sub>2</sub> in. Pitched Blade Propeller - Each

    $95.90
    Pitched blade propeller composed of electropolished 316L stainless steel is chemically inert and corrosion resistant. The 5/16 in. (8 mm) bore is compatible with all Caframo shafts. Set screws included. For low shear, high top-to-bottom pumping capacity...
    650-10546
    $95.90
    Choose Options
    Qty in Cart: 0
    Price:
    $95.90
    Subtotal:
  • Choose Options

    Caframo

    Caframo* 3 in. Pitched Blade Propeller - Each

    $44.35
    Pitched blade propeller composed of chemically inert and corrosion resistant electropolished 316L stainless steel. The 5/16 in. (8 mm) bore is compatible with all Caframo shafts. Set screws included. For low shear, high top-to-bottom pumping capacity...
    340-98104
    $44.35
    Choose Options
    Qty in Cart: 0
    Price:
    $44.35
    Subtotal:
  • Choose Options

    Caframo

    Caframo* <sup>3</sup>/<sub>8</sub> in. Diameter Stainless Steel Shafts

    $51.05
    3/8 in. (9.5 mm) diameter shafts with a turned down 1/2 x 5/16 in. (13 x 8 mm) end. Will accommodate blades with both 5/16 and 3/8 diameters. All shafts are made from passivated 316L stainless steel for maximum corrosion protection. Image(s) are...
    620-10092
    $51.05
    Choose Options
    Qty in Cart: 0
    Price:
    $51.05
    Subtotal:
  • Choose Options

    Caframo

    Caframo* <sup>5</sup>/<sub>16</sub> in. Diameter Stainless Steel Shafts

    $44.35
    5/16 in. (8 mm) diameter shafts can be used with any blade that has a 5/16 in. (8 mm) diameter bore. All shafts are made from passivated 316L stainless steel for maximum corrosion protection.Image(s) are representative of the product group and not...
    430-97863
    $44.35
    Choose Options
    Qty in Cart: 0
    Price:
    $44.35
    Subtotal:
  • Choose Options

    Caframo

    Caframo* Accessory Rod - Each

    $128.05
    Accessory rod to be paired with System Stands A112 (Cat. No. 430-98133), A113 (Cat. No. 430-98136), and A114 (Cat. No. 430-98139). One or two rods can thread into the front legs of the stand base, determined by application. Useful for mounting...
    430-98142
    $128.05
    Choose Options
    Qty in Cart: 0
    Price:
    $128.05
    Subtotal:
  • Choose Options

    Caframo

    Caframo* Anchor Paddle for Ultra Torque Stirrer - Each

    $262.50
    This tangential flow impeller is effective for low speed, high viscosity mixing. The 5 x 10 in. (125 x 250 mm) anchor blade is welded to a 3/8 in. (9.5 mm) diameter shaft. Sometimes referred to as a sweep, the high shear at the edges makes it a good...
    330-92074
    $262.50
    Choose Options
    Qty in Cart: 0
    Price:
    $262.50
    Subtotal:
  • Choose Options

    Caframo

    Caframo* Anchor Paddle with Sweep Blades - Each

    $228.10
    Achieve enhanced process results with the addition of silicone sweep blades (Cat. No. 650-10537) to the U044 anchor impeller (Cat. No. 330-92044). The impeller with sweep is effective for low speed, high viscosity mixing up to 38,000 mPas. The tangential...
    650-10540
    $228.10
    Choose Options
    Qty in Cart: 0
    Price:
    $228.10
    Subtotal:
  • Choose Options

    Caframo

    Caframo* Anchor Paddles

    $179.70
    • These tangential flow impellers are effective for low speed, high viscosity mixing• The anchor blade is welded to an 3/8 in. (9.5 mm) diameter shaft• Made from electropolished stainless steel 316L• Chemically inert and corrosion...
    330-92041
    $179.70
    Choose Options
    Qty in Cart: 0
    Price:
    $179.70
    Subtotal:
  • Choose Options

    Caframo

    Caframo* Chuck Set

    $28.50
    Chuck compatible for High Torque and Compact stirrers, accepting impeller shafts up to 3/8 in. (10 mm) diameter. Chuck key includes tool for removal from stirrers output shaft for cleaning or replacement. Through shaft allows for easy adjustment of...
    330-22057
    $28.50
    Choose Options
    Qty in Cart: 0
    Price:
    $28.50
    Subtotal:
  • Choose Options

    Caframo

    Caframo* Collapsible Blade Impeller - Each

    $95.35
    This radial flow impeller is a popular choice for high speed, low viscosity mixing in carboys or narrow neck flasks. Collapsible blades enter any opening over 3/8 in. (10 mm) diameter. The blades are pinned to the shaft, fanning out with agitation to a...
    330-58195
    $95.35
    Choose Options
    Qty in Cart: 0
    Price:
    $95.35
    Subtotal:
  • Choose Options

    Caframo

    Caframo* Compact Digital Overhead Stirrer - Each

    $997.55
    Caframos BDC2002 offers ultimate versatility and maximizes productivity. With the push of a button, the unique Stirlight™ lights up so that solutions can be seen clearly. Included in each purchase: Overhead stirrer motor, chuck, chuck key, support...
    340-60118
    $997.55
    Choose Options
    Qty in Cart: 0
    Price:
    $997.55
    Subtotal:
  • Choose Options

    Caframo

    Caframo* Compact Stand - Each

    $209.80
    Sturdy stand in a smaller bench footprint, for Compact Digital Stirrers BDC2002 (Cat. No. 340-60118) and BDC2010 Reversing Digital Stirrer (Cat. No. 340-60150). The unique offset design centers impeller in vessel. The cast zinc-aluminum alloy base is...
    330-58327
    $209.80
    Choose Options
    Qty in Cart: 0
    Price:
    $209.80
    Subtotal:
  • Choose Options

    Caframo

    Caframo* Crossed Blade Impeller - Each

    $95.35
    This radial flow impeller is effective for high speed, low viscosity mixing. The 2 in. (50 mm) diameter blade is welded to an 5/16 in. (8 mm) diameter shaft. A high shear impeller with high vortexing properties, creating a vortex in 19 L (5 gal.) of...
    330-58177
    $95.35
    Choose Options
    Qty in Cart: 0
    Price:
    $95.35
    Subtotal:
  • Choose Options

    Caframo

    Caframo* Fastening Clamps

    $96.45
    Durable, strong, easy-to-use fastening clamps used to attach overhead stirrers to their stands. Includes a convenient place to hold chuck key. The cast zinc-aluminum alloy is coated for protection from corrosion and chemical spills.A120 Fastening Clamp...
    330-58153
    $96.45
    Choose Options
    Qty in Cart: 0
    Price:
    $96.45
    Subtotal:
  • Choose Options

    Caframo

    Caframo* High Speed Collet Set - Each

    $558.15
    Achieve greater stability stirring at speeds 1800 to 6000 rpm. Set includes collet, 5/8 in. (16 mm) shaft with an end turned down to 5/16 in. (8 mm), and three impeller blades with 5/16 in. (8 mm) bores. Shaft and blades are made from electropolished 316...
    330-86351
    $558.15
    Choose Options
    Qty in Cart: 0
    Price:
    $558.15
    Subtotal:
  • Choose Options

    Caframo

    Caframo* Impeller Set for BDC250 Overhead Stirrer - Each

    $93.20
    Shaft and impeller blades to fit collet of BDC250 stirrer (Cat. No. 340-98077). Made of all elctropolished 316L stainless steel. Includes one radial blade and one axial blade and interchangeable screw set. This set is also included in the BDC250 stirrer...
    430-98145
    $93.20
    Choose Options
    Qty in Cart: 0
    Price:
    $93.20
    Subtotal:
  • Choose Options

    Caframo

    Caframo* Petite Digital Overhead Stirrer

    $365.85
    The ultimate in compact design measuring only 2 x 4 inches. The BDC250 offers great capabilities in a small package; used in formulation, R&D, clinical research, education labs, anywhere a magnetic stirrer is used. It fits into small spaces and can be...
    340-98077
    $365.85
    Choose Options
    Qty in Cart: 0
    Price:
    $365.85
    Subtotal:
  • Choose Options

    Caframo

    Caframo* Petite Stand for BDC250 Petite Digital Overhead Stirrer - Each

    $136.65
    Support stand for Caframos BDC250 Petite Stirrer (Cat. No. 340-98077). Conveniently portable and easy to assemble for changing work stations or field work. The cast mild steel base is coated with chemical resistant epoxy paint. Included as part of BDC250...
    650-10549
    $136.65
    Choose Options
    Qty in Cart: 0
    Price:
    $136.65
    Subtotal:
  • Choose Options

    Caframo

    Caframo* Pivoting Blade Impeller - Each

    $100.05
    This radial flow impeller is effective for high speed, low viscosity mixing. The straight blade is pinned to the shaft, allowing the blade to pivot with agitation. A moderate shear impeller with moderate vortexing properties, creating a vortex in 19 L (5...
    330-58192
    $100.05
    Choose Options
    Qty in Cart: 0
    Price:
    $100.05
    Subtotal:
  • Choose Options

    Caframo

    Caframo* Polyurethane Chuck Guard - Each

    $67.95
    Implement safety with a quick snap of this clear polyurethane chuck guard to the stirrer housing. Creates barrier around moving chuck, as well as protects chuck from chemical splashes. Use with overhead stirrers BDC1850 (Cat. No. 340-60109), BDC3030 (Cat...
    650-10585
    $67.95
    Choose Options
    Qty in Cart: 0
    Price:
    $67.95
    Subtotal:
  • Choose Options

    Caframo

    Caframo* Propeller and Shaft - Each

    $117.30
    This impeller serves a wide range of stirring applications, pairing the blade and shaft in a convenient package. This axial flow impeller is effective for high speed, low to medium viscosity mixing. The 21/2 in. (65 mm) diameter blade fixes to an...
    330-58213
    $117.30
    Choose Options
    Qty in Cart: 0
    Price:
    $117.30
    Subtotal:
  • Choose Options

    Caframo

    Caframo* PTFE 4-Blade Pitched Impeller - Each

    $265.75
    An axial flow PTFE impeller for high speed, low viscosity mixing. With 45° pitched blades, the impeller is attached to a PTFE-coated stainless steel core shaft. The stainless steel core of the shaft provides stability. PTFE (polytetrafluoroethylene)...
    340-98086
    $265.75
    Choose Options
    Qty in Cart: 0
    Price:
    $265.75
    Subtotal:
  • Choose Options

    Caframo

    Caframo* PTFE Anchor Paddle - Each

    $290.50
    A tangential flow PTFE impeller for low speed, higher viscosity mixing. The blade is attached to a PTFE-coated stainless steel core shaft. Designed for use in round bottom vessels and reaction flasks. The stainless steel core of the shaft provides...
    340-98083
    $290.50
    Choose Options
    Qty in Cart: 0
    Price:
    $290.50
    Subtotal:
  • Choose Options

    Caframo

    Caframo* PTFE Collapsible Impeller - Each

    $203.60
    A radial flow PTFE impeller for high speed, low viscosity mixing in narrow neck flasks. The blades are attached to PTFE-coated shaft, fanning out with agitation to a maximum diameter of 11/2 in. (40 mm). The stainless steel core of the shaft provides...
    340-98080
    $203.60
    Choose Options
    Qty in Cart: 0
    Price:
    $203.60
    Subtotal:
  • Choose Options

    Caframo

    Caframo* Reversing Digital Overhead Stirrer - Each

    $1,251.95
    Caframo BDC2010 stirrer delivers 50% more power than the BDC2002 Compact Digital Overhead Stirrer (Cat. No. 340-60118) while keeping the same compact footprint, Stirlight™, and through shaft. The BDC2010 works smarter and allows the user...
    340-60150
    $1,251.95
    Choose Options
    Qty in Cart: 0
    Price:
    $1,251.95
    Subtotal:
  • Choose Options

    Caframo

    Caframo* Safety Stand - Each

    $236.70
    This durable stand provides excellent stability for bench stop stirrers even when agitating viscous materials. The wide base and H configuration allow for a wide range of vessel sizes, while 304 stainless steel stand rod enables strong engagement with...
    330-58141
    $236.70
    Choose Options
    Qty in Cart: 0
    Price:
    $236.70
    Subtotal:
  • Choose Options

    Caframo

    Caframo* Safety Stand Base Only - Each

    $185.50
    This durable stand provides excellent stability for bench stop stirrers even when agitating viscous materials. The wide base and H configuration allow for a wide range of vessel sizes. Portable and adaptable to address changing work spaces, equipment,...
    330-58144
    $185.50
    Choose Options
    Qty in Cart: 0
    Price:
    $185.50
    Subtotal:
  • Total: items /

Adding your products to cart