ADAPTERS

ADAPTERS

  • Choose Options

    Corning® PYREX® 105° Angle Vacuum Connecting Adapters

    Corning Incorporated

    $99.15
    With tubulation of 10 mm OD for attaching to a vacuum pump or to inner and outer TS joints. Includes a drip-tip on the inner tub.Image(s) are representative of the product group and not necessarily the individual product.Standard Taper Bottom Inner...
    988-28288
    $99.15
    Choose Options
  • Choose Options

    Corning® PYREX® Adapter Bushing Type TS Joints

    Corning Incorporated

    $79.45
    These adapters are fabricated with heavy walls for mechanical strength and are further strengthened by the heavy, uniform rim at the top which affords a serviceable finger grip.These adapters are shorter than the conventional type, thus allowing more...
    988-28024
    $79.45
    Choose Options
  • Choose Options

    Corning® PYREX® Reducing Adapter TS Joints

    Corning Incorporated

    $66.55
    With an outer TS joint at the top and a smaller inner TS joint at the bottom.Image(s) are representative of the product group and not necessarily the individual product.TS Joint Size Top Outer: 24/40TS Joint Size Bottom Inner: 19/38Approx. Length (mm):...
    988-27943
    $66.55
    Choose Options
  • Choose Options

    Corning® PYREX® Tube with Outer TS Joint

    Corning Incorporated

    $41.35
    Made with inner angle of 105°. Upper end is equipped with outer TS 24/40 joint. Lower end cut off at angle for use as a receiver adapter. Tube OD 12 mm.Image(s) are representative of the product group and not necessarily the individual product.
    988-28090
    $41.35
    Choose Options
  • Choose Options

    Corning® PYREX® Vacuum Mercury Manometers

    Corning Incorporated

    $255.65
    The manometer tube is enclosed in a round bottom, graduated jacket and is sealed to a stopcock plug. In use mercury is placed in the inner tube and in the jacket bottom to measure the pressure differential. Not recommended for positive pressure. The...
    988-26431
    $255.65
    Choose Options
  • Choose Options

    Inlet Flow Control PTFE Varibor Metering Plug - Each

    Kimble Chase Life Science and Research Products LL

    $207.95
    Provides on/off control with the main valve. Allows delivery of preset volumes of gases or liquids to reactions using the needle valve.Image(s) are representative of the product group and not necessarily the individual product.
    985-13090
    $207.95
    Choose Options
  • Choose Options

    Inlet with Hose Connection

    Kimble Chase Life Science and Research Products LL

    $62.15
    Vertical adapter with vacuum take-off and drip tip.Image(s) are representative of the product group and not necessarily the individual product.
    985-13927
    $62.15
    Choose Options
  • Choose Options

    Kimble® 90° Hose Inlet Adapters

    Kimble Chase Life Science and Research Products LL

    $30.85
    Hose inlet 90 degree adapters. Ideal for use as a vent or for the introduction of pressure/vacuum. Inner Standard Taper joint at the bottom and hose connection on the side. Manufactured from 33 expansion, low extractable borosilicate glass conforming to...
    985-16141
    $30.85
    Choose Options
  • Choose Options

    Kimble® Bleed Type Inlet Adapter with Dual Hose Connections and Standard Taper Joint - Each

    Kimble Chase Life Science and Research Products LL

    $55.90
    Designed with two side hose connectors for venting or introducing gas/vacuum into a system. Hose connections fit 3/8 in. I.D. flexible tubing. Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type...
    985-12994
    $55.90
    Choose Options
  • Choose Options

    Kimble® Bleed Type Inlet Adapter with Hose Connection - Each

    Kimble Chase Life Science and Research Products LL

    $28.05
    For the introduction of gases or liquids during reactions. Hose connection fits 1/4 in. I.D. flexible tubing. Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements.Image(s)...
    985-16123
    $28.05
    Choose Options
  • Choose Options

    Kimble® Bleed Type Inlet Adapter with Top Tubulature - Each

    Kimble Chase Life Science and Research Products LL

    $25.55
    For the introduction of gases or liquids to reactions. Fits 10 mL round bottom flasks with a 10/18 joint. Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements.Image(s) are...
    985-16108
    $25.55
    Choose Options
  • Choose Options

    Kimble® Foam-Type Distillation Traps

    Kimble Chase Life Science and Research Products LL

    $83.75
    Placed above a boiling flask to prevent foaming-type reactions from entering either the distilling column or the condenser. Useful with rotary evaporators. Cat. No. 985-25489 features a more extensive baffle system than other traps. Manufactured from 33...
    985-16078
    $83.75
    Choose Options
  • Choose Options

    Kimble® Kontes® Glass Bushing Adapters

    Kimble Chase Life Science and Research Products LL

    $41.60
    Bushing adapters allow for compact assemblies of dissimilar joints. 10/30 sizes on small (top) joints are useful as fittings for thermometers. Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type...
    985-11515
    $41.60
    Choose Options
  • Choose Options

    Kimble® Microfiltration Adapter Assembly with GL45 Thread - Each

    Kimble Chase Life Science and Research Products LL

    $118.65
    This adapter assembly is designed to allow connection of a 47 mm or 90 mm filtration support base with a straight drip tip to a bottle or reservoir with a GL 45 thread. • Filtrate is collected directly into a media-type bottle when using a standard...
    985-12973
    $118.65
    Choose Options
  • Choose Options

    Kimble® O-Ring Vacuum Connector with Hose Connection - Each

    Kimble Chase Life Science and Research Products LL

    $61.80
    Size 15 o-ring connector (15 mm I.D.) for use with HI-VAC® manifolds (Cat. No. 985-14308, 985-143017, 985-14320, and 985-14323) and 179920 adapters (see accessories). Manufactured from 33 expansion, low extractable borosilicate glass conforming to...
    985-13060
    $61.80
    Choose Options
  • Choose Options

    Kimble® Outer Joint Hose Inlet Adapters

    Kimble Chase Life Science and Research Products LL

    $32.75
    Ideal for use as a vent or for the introduction of pressure/vacuum. Standard Taper joint at one end and vertical hose connection at the other. Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type...
    985-16153
    $32.75
    Choose Options
  • Choose Options

    Kimble® Pour / Transfer Adapters

    Kimble Chase Life Science and Research Products LL

    $44.60
    Used for precise pouring of liquids from reactors and joint flasks. Designed to eliminate droplet run-back. Suitable for dry box and remote applications. Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM...
    985-13111
    $44.60
    Choose Options
  • Choose Options

    Kimble® Right Angle Flow Control Inlet Adapter with Glass Stopcock and Outer Standard Taper Joint - Each

    Kimble Chase Life Science and Research Products LL

    $92.45
    For regulating the input of gases or liquids into reaction systems. Stopcock has a glass plug (replacement available, Cat. No. 985-40117). Outer Standard Taper joint on one end and 90° hose connection on the opposite end. Manufactured from 33...
    985-13099
    $92.45
    Choose Options
  • Choose Options

    Kimble® Thermometer Inlet Adapter with Hose Connection - Each

    Kimble Chase Life Science and Research Products LL

    $69.25
    Hose connection on the side accepts 3//8 in. I.D. flexible tubing. Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirementsImage(s) are representative of the product group and...
    985-13144
    $69.25
    Choose Options
  • Choose Options

    Kontes Connecting Straight Adapters

    Kimble Chase Life Science and Research Products LL

    $45.60
    Expands length of apparatus and is also useful as an air condenser. 985-16039, 985-16042 and 985-12031, 985-12034 adapters have outer Standard Taper joints at one end and inner Standard Taper joints on the other end985-12049 and 985-12055 adapters have...
    985-16039
    $45.60
    Choose Options
  • Choose Options

    Kontes Inlet Hose Spherical Joint Connector Sockets

    Kimble Chase Life Science and Research Products LL

    $40.80
    O-ring socket joint hose connectors. Standard Spherical Joint sizes fit existing apparatus using spherical joints and permit attachment of flexible hose without costly modification of the apparatus. Manufactured from 33 expansion, low extractable...
    985-25732
    $40.80
    Choose Options
  • Choose Options

    Kontes Reducing Connecting Adapters

    Kimble Chase Life Science and Research Products LL

    $40.60
    For reducing the size of Standard Taper glass joints.• Outer joint is at the top, inner at the bottom • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A...
    985-15994
    $40.60
    Choose Options
  • Choose Options

    Kontes* 105° Distillation Bent with Tapered Drip Tube

    Kimble Chase Life Science and Research Products LL

    $34.45
    • Standard Taper outer joint at top• Tapered drip tube extends into open receivers • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirementsImage(s) are...
    985-15922
    $34.45
    Choose Options
  • Choose Options

    Kontes* BEVEL-SEAL* Connecting Adapters

    Kimble Chase Life Science and Research Products LL

    $96.20
    Connects to vacuum systems, NMR tubes, photochemical cuvettes, lyophilizing tubes, flowmeters, etc. Simple O-ring connections form a vacuum seal on glass tubing by tightening the compression capSupplied with FKM o-ring and open top polypropylene capBody...
    985-12964
    $96.20
    Choose Options
  • Choose Options

    Kontes* Claisen Distillation Adapters

    Kimble Chase Life Science and Research Products LL

    $31.50
    • Provides dual entry into a variety of flasks• Compatible with glass BEVEL-SEAL inlet adapters or PTFE BEVEL-SEAL inlet adapters for thermometer use at either top opening• Useful for reflux with addition-type reactions• Joints...
    985-15952
    $31.50
    Choose Options
  • Choose Options

    Kontes* Connecting Offset Adapters - Each

    Kimble Chase Life Science and Research Products LL

    $58.95
    For use with multiple entry flasks or reaction vessels. Design helps avoid possible contact with stirrer shafts.Image(s) are representative of the product group and not necessarily the individual product.
    985-13102
    $58.95
    Choose Options
  • Choose Options

    Kontes* Connecting Threaded BEVEL-SEAL* - Each

    Kimble Chase Life Science and Research Products LL

    $39.50
    Used for connecting glass tubing.All connectors have an overall length of approximately 50 mmOpen top cap is suitable for use to 150°CBlue glass-filled nylon capO-rings are FKMManufactured from 33 expansion, low extractable borosilicate glass...
    985-12808
    $39.50
    Choose Options
  • Choose Options

    Kontes* Connecting Universal PTFE

    Kimble Chase Life Science and Research Products LL

    $29.00
    Polypropylene Replacement Caps for Connecting Adapters:• 985-12937: 5/8 in. - 18, Fits OD 8 mm, Hole Dia. 8.5 mm• 985-12940: 3/4 in. - 16, Fits OD 10 mm, Hole Dia. 10.5 mmImage(s) are representative of the product group and not necessarily...
    985-12937
    $29.00
    Choose Options