HOMOGENIZERS

HOMOGENIZERS

  • Choose Options

    Bel-Art Scienceware* Extended Handle Pestle

    Bel-Art Scienceware Products

    $23.60
    Polypropylene tissue grinder efficiently homogenizes tissue and cells in microcentrifuge tubes, centrifuge and grinding tubes. The cone tapers from 8.2 mm (0.33 in.) down to 2.9 mm (0.12 in.) in a length of 19.8 mm (0.78 in.) and has a rounded end. 21 cm...
    964-17083
    $23.60
    Choose Options
  • Choose Options

    Bel-Art Scienceware* Micro-Mill* II Grinder

    Bel-Art Scienceware Products

    $358.55
    The Micro-Mill II with stainless steel blade swiftly crushes 20 to 50 ml samples such as bauxite, limestone, bone, ceramics, pharmaceuticals and similar drier samples. Softer samples may be ground with dry ice. The rocker switch has two operating...
    334-27463
    $358.55
    Choose Options
  • Choose Options

    Bel-Art Scienceware* Pestles for Microcentrifuge Tubes

    Bel-Art Scienceware Products

    $66.60
    Ideal for resuspending lyophilized products or precipitates and for homogenizing samples in a microcentrifuge tube. The PTFE pestle is mounted on a stainless steel shaft, 3.2 mm (1/8 in.) in diameter that may be hand-held or mounted in a motorized chuck...
    144-17095
    $66.60
    Choose Options
  • Choose Options

    Bel-Art Scienceware™ Micro-Mill® Grinder

    Bel-Art Scienceware Products

    $29.90
    For rapid, high-speed grinding of small samples from 20 to 50cc. Stainless steel or hard-faced blade rotates at speeds up to 12,000 rpm to successfully grind bauxite, bone, ceramics, coal, Devardas alloy, fertilizer, filter paper, fly ash, frozen tissue,...
    344-22789
    $29.90
    Choose Options
  • Choose Options

    Benchmark Scientific Handheld Homogenizer

    Benchmark Scientific

    $312.70
    Benchmarks D1000 handheld homogenizer is designed to rapidly homogenize, emulsify, suspend and disrupt biological samples. Ideal for use with microtubes, the homogenizer works well with samples from 0.1 mL to 250 mL (depending upon the generator probe...
    655-10093
    $312.70
    Choose Options
  • Choose Options

    Benchmark Scientific TriplePure Prefilled 2.0 mL Tubes

    Benchmark Scientific

    $146.00
    Prefilled tubes with Triple-Pure™ zirconium beads. Acid washed and processed to remove nucleases and proteases. The Triple-Pure bead tubes undergo special handling during filling and are quality tested to ensure the elimination of DNase, RNase,...
    155-40933
    $146.00
    Choose Options
  • Choose Options

    Benchmark* Bulk Beads for Microtube Homogenizers

    Benchmark Scientific

    $35.85
    A variety of bulk beads are available including stainless steel, glass, and Triple-Pure™ zirconium beads. All three bead types are acid washed and processed to remove nucleases and proteases. The Triple-Pure bead tubes undergo special handling...
    625-10095
    $35.85
    Choose Options
  • Choose Options

    Benchmark* Prefilled Tube Kits

    Benchmark Scientific

    $110.75
    A variety of prefilled 2.0 mL tubes are available for homogenizing samples including glass, ceramic, or stainless steel. All bead types are acid washed and processed to remove nucleases and proteases. Bead beating is quickly becoming the preferred...
    155-40918
    $110.75
    Choose Options
  • Choose Options

    Bessman Tissue Pulverizer

    Spectrum Laboratories, Inc.

    $597.95
    A two-compartment stainless steel mortar with handles and a pestle designed for pulverization of 10 to 1000 mg of tissue. A 28 cm lead hammer is included. Ten test tubes are included with the small and medium pulverizer, and one culture tube is included...
    988-14500
    $597.95
    Choose Options
  • Choose Options

    BioHomogenizer*

    Biospec Products

    $29.20
    A rotor/stator-type tissue homogenizer designed to rapidly homogenize, disperse and emulsify biological samples in aqueous media from 1 to 2000 ml. The powerful and completely sealed 10,000 rpm motor can be handheld or stand-mounted. Suspended material...
    330-21481
    $29.20
    Choose Options
  • Choose Options

    Biospec BeadBeater Homogenizer - Each

    Biospec Products

    $882.90
    Laboratory-scale homogenizer for disrupting aqueous suspensions of yeast or bacteria. The BeadBeater comes complete with everything you need with a 350 mL polycarbonate chamber, rotor assembly, motor base, ice-water cooling jacket and one pound of glass...
    340-19954
    $882.90
    Choose Options
  • Choose Options

    Biospec Chrome-Steel Beads

    Biospec Products

    $47.05
    Chrome steel has a density of 7.9g/cc (used mostly for grinding leaves). Beads are sold in one pound bottles.With chrome steel beads, common polypropylene microvials will break if dry grinding or cryo-grinding is attempted. In this case, stainless steel...
    140-20059
    $47.05
    Choose Options
  • Choose Options

    Biospec Glass Beads

    Biospec Products

    $45.80
    Glass has a density of 2.5 g/cc and is the most commonly used bead media for Beadbeating. Beads are sold in one pound bottles.Image(s) are representative of the product group and not necessarily the individual product.Diameter (mm): 0.1Diameter (mm): 0...
    140-19972
    $45.80
    Choose Options
  • Choose Options

    Biospec Mini-BeadBeater-1

    Biospec Products

    $15.95
    The Mini-Beadbeater-1 violently agitates a sealed microcentrifuge vial containing cells or tissue, extraction solution and tiny glass, zirconia or steel beads. Even resistant yeast or fibrous tissues are completely homogenized in about 3 minutes in 0.1...
    330-33196
    $15.95
    Choose Options
  • Choose Options

    BioSpec Replacement Probes for Tissue-Tearor Homogenizer

    Biospec Products

    $22.25
    All probes are interchangeable with the Tissue-Tearor motor. Each probe comes with a plastic storage stand†.†The 14 mm diameter probe (Cat. No. 340-57571) does not come with a plastic storage stand.Image(s) are representative of the product...
    340-57559
    $22.25
    Choose Options
  • Choose Options

    Biospec Stainless Steel Beads

    Biospec Products

    $61.05
    Stainless steel beads have a density of 7.9g/cc. They are used mostly for grinding leaves and seeds. They are made of Type 316 stainless steel - the most corrosion resistant available. Stainless steel beads can be cleaned and reused.With stainless steel...
    140-20035
    $61.05
    Choose Options
  • Choose Options

    Biospec Tissue Grinder Accessories - Each

    Biospec Products

    $280.60
    Tissue grinders are designed to gently homogenize fresh, soft tissue in an excess of an appropriate solvent. This Biospec all stainless-steel mortar and pestle (Potter-Elvehjem style) tissue grinder provides superior temperature control and greater...
    330-21547
    $280.60
    Choose Options
  • Choose Options

    Biospec Tissue-Tearor* Tissue Homogenizers

    Biospec Products

    $980.95
    The Tissue-Tearor is a rotor/stator type tissue homogenizer which can rapidly homogenize, disrupt, and emulsify samples in 0.5 to 1000 mL of liquid. Complete homogenization of tissues (muscle, liver, breast tissue, etc.) is usually achieved in ten to...
    340-57520
    $980.95
    Choose Options
  • Choose Options

    Biospec TissueTearor and Accessories

    Biospec Products

    $1,010.55
    The Tissue-Tearor is a rotor/stator type tissue homogenizer which can rapidly homogenize, disrupt, and emulsify samples in 0.2 - 1000 ml of liquid. Complete homogenization of tissues (muscle, liver, breast tissue, etc.) is usually achieved in ten to...
    330-57547
    $1,010.55
    Choose Options
  • Choose Options

    Biospec Tungsten-Carbide Beads - Each

    Biospec Products

    $93.30
    Tungsten Carbide has a density of 14.9g/cc. While very dense, this bead is not recommended for biopreps. It will leave your prep dirty.Note: These beads impart a brown-gray color to homogenates. This inert, colloidal tungsten-carbide can often be...
    140-20023
    $93.30
    Choose Options
  • Choose Options

    Biospec Zirconia Beads

    Biospec Products

    $111.75
    Zirconia beads have a density of 5.5g/cc (Twice as dense as glass beads - good for tough tissue). Sold in one pound bottles.Image(s) are representative of the product group and not necessarily the individual product.Diameter (mm): 0.7Diameter (mm):...
    140-19999
    $111.75
    Choose Options
  • Choose Options

    Biospec Zirconia/Silica Beads

    Biospec Products

    $63.85
    Zirconia/Silica has a density of 3.7g/cc (50% more dense than glass - good for spores and most tissues). Beads are sold in one pound bottles.Image(s) are representative of the product group and not necessarily the individual product.Diameter (mm): 0...
    140-19981
    $63.85
    Choose Options
  • Choose Options

    Biospec* BioMixer* Grinding Mill Attachment - Each

    Biospec Products

    $31.95
    Grinding mill attachment for dry materials such as seeds, grains, plant fibers, pharmaceutical materials, etc. For use with BioMixer (Cat. No. 330-19588 and 330-19594).Image(s) are representative of the product group and not necessarily the individual...
    330-19600
    $31.95
    Choose Options
  • Choose Options

    Biospec* BioMixer* Handheld Blender/Mixer - Each

    Biospec Products

    $285.50
    The BioMixer is a versatile high-speed blender/mixer. Designed for one-hand operation, the BioMixer can be used with any suitable beaker or vessel having at least a 2 inch opening. Three stainless steel attachments included (chopper, vortex mixer disc,...
    330-19588
    $285.50
    Choose Options
  • Choose Options

    Biospec* BioMixer* Stainless Steel Attachments - Each

    Biospec Products

    $36.95
    Three stainless steel attachments (chopper, vortex mixer disc, perforated mixer) for any combination of mixing, emulsification, shredding, or chopping. For use with BioMixer (Cat. No. 330-19588 and 330-19594).Image(s) are representative of the product...
    330-19606
    $36.95
    Choose Options
  • Choose Options

    Biospec* Jiffy Mixer - Each

    Biospec Products

    $31.95
    The small mixing shaft and head of the Jiffy Mixer is specially designed to stir viscous solutions (like food toppings, lotions, cell paste, epoxy resins, paint - anything that is flowable). It thoroughly disperses and/or dissolves multi-part mixtures...
    330-77965
    $31.95
    Choose Options
  • Choose Options

    Biospec* MicroMincer Tissue Press

    Biospec Products

    $26.55
    The MicroMincer is a compact, hand-operated screw press which homogenizes 0.3 grams or less of fresh plant or animal tissue instantly, without sample loss, heat generation, foaming or aerosol problems. The sample, without added buffer, is pushed through...
    330-31885
    $26.55
    Choose Options
  • Choose Options

    BioVortexer*

    Biospec Products

    $58.25
    A lightweight, battery-powered unit designed to be used with microcentrifuge tubes. Centrifugal pellets, precipitates and other solids are completely dispersed in seconds by a combination of mechanical and vortex action. Disposable, polypropylene...
    150-19636
    $58.25
    Choose Options
  • Choose Options

    Corning* Gosselin* S-Blender-1 - Each

    Corning Incorporated

    $5,158.40
    The Gosselin™ S-Blender-1A is a high performance blender designed for microbiological sample preparation. The blender, which is suitable for a range of sample dilutions between 50 mL and 400 mL, ensures quick and accurate blending of any food,...
    348-21643
    $5,158.40
    Choose Options
  • Choose Options

    Corning® PYREX® Tenbroeck Homogenizer - Each

    Corning Incorporated

    $274.45
    Designed for grinding small samples for pathological and bio-chemical work. It may be used manually. Adaptable for use with a slow speed stirrer by means of a rubber stopper and a rod. Made in accordance with Federal Specification DD-T-363a.Image(s) are...
    988-27601
    $274.45
    Choose Options
  • Choose Options

    Corning® PYREX® Tenbroeck Homogenizers

    Corning Incorporated

    $174.75
    These PYREX homogenizers are designed for use in hand grinding small samples for pathological or biochemical studies. The mortar tubes and pestles are ground to be interchangeable. Clearance between the two parts is approximately 0.15mm. The medium grind...
    988-27610
    $174.75
    Choose Options
  • Choose Options

    Corning® PYREX® Tissue Grinder Dounce 2 Glass Pestles

    Corning Incorporated

    $138.35
    Supplied with two pestles to ensure dissociation of cells into fine particles with minimal damage to cell nuclei. Use the large clearance pestle for initial reduction of soft tissue. Complete the homogenization with the small clearance pestle...
    988-27529
    $138.35
    Choose Options
  • Choose Options

    Corning® PYREX® Tissue Grinder Glass Pestle

    Corning Incorporated

    $146.95
    Designed to handle both initial grinding and final homogenization in the same sequence of operations. The lower conical section is intended primarily for the initial grinding. To assist in this work the clearance between mortar and pestle can be adjusted...
    988-27532
    $146.95
    Choose Options