PETRI DISHES

• Stronger, heavier construction • Surface is hydrophobic and does not facilitate cell attachment • Available in four diameters: 35, 60, 100 and 150 mm• 35 mm dish has off-set bottom for improved handling• 60 & 100 mm dish...

• Cut-to-size polytubing for Petri dish storage • Petri-Sleeve™ can be sized to accommodate any number of Petri dishes • Each length of sleeve can be custom sized to prevent baggy packaging and prevent excess waste • Petri...

• Work comfortably with solid state media • 30° angle creates a more comfortable work surface for streaking, transferring, & counting• Rear slot accepts all PetriOrienters™ (not included) to create a custom layoutImage(s) are...

Support N Seal provides a stabilizing vertical slot in which the Petri dish and lid are held closely together while allowing rotation as a sealing tape is applied around the dish. Compatible with most sealing tapes including: Breathe Easy Breathable...

• Stop labeling with a ruler and pen or leaning over a benchtop template• Labels remain firmly attached in temperatures from 4°C to 42°C and are water resistant once attached• Sectors are publication-quality and may be...

PetriStickers allow for petri dishes to be labeled quickly, neatly and reliably. Made with water-resistant ink, substrate and adhesives and will remain firmly attached at temperatures from 42° to 4°C. Simply remove the labels protective backing...

Sterile, 100% cotton, absorbent twill-backed velveteen squares are 15.2 x 15.2 cm (6 x 6 in.). Packed in a sealed bag with three inner locking bags each containing 12 squares, 36 pcs. total. For Scienceware® Replica-Plating Device (Cat. No...

This tool allows safe examination of the bottom of plates without risking spills on the face and eyes. Ideal for examining cell monolayer, cell clones and for counting viral plaques or bacterial colonies. Easy and safe reading of hemagglutination,...

• Stronger, heavier construction• Surface is hydrophobic and does not facilitate cell attachment• Grip ring on the base• Lids contain molded spacers for gas exchange• Manufactured from medical-grade virgin polystyrene•...

• Designed for simultaneous studies of organisms in a common environment• Molded dividers create completely separate compartments while allowing airflow• Ridge on bottom of dish allows easy handling and stacking• Lids contain 3...

• Manufactured from medical-grade virgin polystyrene• Ventilation ribs reduce condensation and allow air circulation• Consistent flatness allows for even media distribution• Flared lid skirt and squared corners for easy one-hand...

Bio-agricultural dishes with 3 vents. Specially designed for seed germination. Made of crystal polystyrene. Optimal flatness. Easy opening. Available as a single or 4 compartment version. Sterile. Dia. x H: 100 x 25 mm.Perfect flatness to ensure the...

65 mm crystal polystyrene contact dishes with 3 vents and flat base. Molded grid 10 x 10 mm. Guarantees a 19% saving in agar while maintaining the essential qualities of surface sampling. Manufactured in class 100. Sterile. Perfect flatness too...

140 mm round Petri dishes with 3 vents. Made of optical polystyrene. Manufactured in a class 100 environment. Easy opening. Sterile.Perfect flatness too ensure the agars constant depth. The injection point situated on the side of the dish bottom of the...

Square Petri dishes with 4 vents. Made of optical polystyrene. Manufactured in a class 100 environment. Easy opening. Available sterile or non-sterile. Measures 120 x 120 x 15.8 mm. Perfect flatness too ensure the agars constant depth. The injection...

Round stackable Petri dishes with 4 vents. Made of optical polystyrene. Manufactured in a class 100 environment. High quality control standard. Optimized for automation. Sterile. Dia. x H: 100 x 15 mm. Perfect flatness too ensure the agars constant depth...

Round slippable Petri dishes with 4 vents. Made of optical polystyrene. Manufactured in a class 100 environment. High quality control standard. Optimized for automation. Sterile. Dia. x H: 100 x 15 mm. Perfect flatness too ensure the agars constant depth...

Round Petri dishes with 3 vents and frosted area. Made of optical polystyrene. Manufactured in a class 100 environment. High quality control standard. Optimized for automation. Non-sterile. Double outer bag with traceability. Dia. x H: 90 x 14.2 mm...

Round Petri dishes with 3 vents. Made of optical polystyrene. Manufactured in a class 100 environment. High quality control standard. Optimized for automation. Available sterile or non-sterile. Double outer bag with traceability option. Dia. x H: 90 x 14...

Round domed Petri dishes with grid lids. Made of optical polystyrene. Manuafctured in a class 100 environment. High quality control standard. Optimized for automation. Guarantees a 19% saving in agar while maintaining the essential qualities of...

Round Petri dishes with 6 vents. Made of optical polystyrene. Manufactured in a class 100 environment. High quality control standard. Optimized for automation. Available sterile or non-sterile. Dia. x H: 55 x 14.2 mm. Perfect flatness too ensure the...

These crystal polystyrene petri dishes are gamma irradiated and used to culture bacteria, fungi, and other microorganisms. Petri dish with absorbent cellulose pad eliminates hand-loading time and minimizes contamination.Image(s) are representative of the...

Sterilin™ Petri dishes are manufactured under strict aseptic conditions within a Class J clean room which complies with BS 5295. Petri dishes remain under clean room conditions throughout the manufacturing process. An in-house microbiology...

• Stabilization ring in base ensures even media depth for susceptibility test• For use in automated filling equipment• Disposable (single use) Polystyrene petri dish for general microbiological use• Molded from medical grade...

• Intended use is in vitro fertilization • CE marked according to Medical Devices Directive 93/42/EEC • Produced and marketed in compliance with the FDA demands for IVF products • Full batch control of all components in the final...

Sterile petri dishes are molded from biomedical grade polystyrene with emphasis on optical clarity. Dishes are used for culturing of fungi, bacteria and other microorganisms. They perform well in automatic dispensers due to complete flatness and uniform...

ABS plastic is corrosion resistant and easy to clean.• Adjustable dispenser holds 15 Petri dishes up to 102 mm (4 in.) diameter • Loads from top, dispenses one dish at a time from bottom • Open sides for easy viewing of contentsImage(s)...

Petri dishes are molded from biomedical grade polystyrene with emphasis on optical clarity. Dishes are used for culturing of fungi, bacteria and other microorganisms. They perform well in automatic dispensers due to complete flatness and uniform height...

Dishes with Nunclon adherent cell surface treatment provide reliable quality and consistent culturing characteristics for cloning, culture and scale-up. Optically clear and uniform surface suitable for microscopy. Top and bottom stacking rings provide...

• Approximate growth surface area is 55 cm2• Ultra Low Attachment dishes feature a covalently bound hydrogel layer that effectively inhibits cellular attachment• Surface minimizes protein absorption, enzyme activation, and cellular...

These flat, clear Corning petri dishes are made from Soda Lime Silica glass and will withstand repeated sterilization (wet or dry). Approximate dish bottom diameter and height is 142x22mm. The edges are beaded to provide greater mechanical strength. The...

Sterile polystyrene disposable (single use) petri dishes are for general microbiological or general laboratory use. A flared lid skirt and squared corners provide for easy one hand operation, especially when wearing gloves. Molded from medical grade...

This rack is useful for safe transport and incubation of 100 mm petri dishes and helps to streamline benchtop sample processing. Each rack holds up to forty-two petri dishes with lids, configured in six columns of seven plates. Up to four racks can be...

Epoxy-coated steel wire racks hold 100 mm plastic petri dishes and can be easily loaded and emptied from the top. The wide front opening permits easy access but prevents dishes from sliding out. Not suitable for glass petri dishes.Image(s) are...

Epoxy-coated steel wire racks dispense petri dishes one at a time from the bottom of the stack. Not for glass dishes.Image(s) are representative of the product group and not necessarily the individual product.Dimensions L x W x H in. (mm): 5.75 x 10.75 x...

Increase workspace and efficiently transport Petri dishes with the Easyplate. The Easyplate eliminates a balancing act of Petri dishes and enables you to transport Petri dishes rapidly and orderly. Elastic holding devices keep the Petri dishes in place...

Made of polystyrene. Commonly referred to as a 100 mm x 15 mm dish. Free from optical distortion and sterile. These dishes are ideal for phage typing, susceptibility testing, plate counts, and probe assays. Each 13 mm grid is marked numerically in one...

Manufactured from pure virgin polystyrene with unsurpassed optical clarity. Engineered for optimum flatness to provide uniform agar thickness-reducing media costs. Sterile packaged in easy-open bags (inner pack). Venting ribs on underside of lid allow...

Polystyrene, sterile and free from optical distortion. Designed to allow a raised convex surface of culture medium. The grid is 10 x 10 mm with numeric and lettered squares to facilitate counting and locating colonies. Measures 65 x 15 mm.Image(s) are...

Simport® Petri dishes are available in a variety of shapes and sizes for use in routine procedures and with automated equipment. Economical, optically clear dishes are precision-molded from biomedical grade polystyrene so cultures are clearly...