FUME HOOD ACCESSORIES

Allows passage of a cable through the right-side interior wall to the exterior. With 4 closed-cell neoprene plugs with holes for cords/cables with diameters of 1/8 in., 1/4 in., 3/8 in. and 1/2 in., and blank plug. NSF-approved port does not disrupt...

Allows display of inflow and downflow velocities on the LCD information center. Includes sensor, wiring harness and hardware. Installation and certifier calibration are required. Applicable Products: PuriCare Procedure Stations (2013 and newer), Purifier...

Includes serrated hose tip valve with ball valve, quarter turn control handle and hardware. Mounts on left or right side interior. Cabinets are factory-prepared for up to four fixtures: two forward mounted 8.5 in. above surface and two back mounted 10 in...

Carbon-based and HEPA filters used in a variety of Labconco enclosures require periodic replacement. Select the right filters to fit your Labconco product. Applicable Products: PuriCare Procedure Stations (pre-2008), Purifier Cell Logic & Cell Logic+...

Replacement T-Bolt Hose Clamps. 5 in. Dia., two are included with FilterMate Portable Exhauster. 6 in. Dia., two are included with Flexible Hose, Cat. No. 626-10065.Image(s) are representative of the product group and not necessarily the individual...

Adapter, 5 in. nominal diameter x 6 in. nominal diameter, powder coated steel, for connecting a 2, 3 or 4 ft. XPert Balance System with Caopy Connection or a 2, 3, 4 ft. XPert Balance Station to a FilterMate Portable Exhauster with Flexible Hose...

Cat No. 626-10062: Flexible Hose, 5 in. I.D., clear urethane, smooth bore with white helix, static dissipative, suitable for pharmaceutical and cleanroom applications. For use with FilterMate Portable Exhauster. Length is 8 feet. Includes two clamps.Cat...

Service Fixture Kit, includes serrated hose tip valve with quarter turn control handle, hardware and instructions for plumbing to services. Up to two fixtures may be mounted on the right hand side of pre-March 2012 Purifier Horizontal Clean Benches...

UV Screen Kits for 3, 4 and 6 ft. Purifier Horizontal Clean BenchesImage(s) are representative of the product group and not necessarily the individual product.For Use With: 3 ft. modelsShipping Weight (lbs): 10For Use With: 4 ft. modelsShipping Weight...

For use with Purifier Vertical Clean Benches and Filtered PCR Enclosures. IV Bar supports intravenous solution bottles and bags. Includes IV bar, mounting hardware, four hangers and instructions for installation.Image(s) are representative of the product...

Corrugated paper pre-filters trap large particles to extend HEPA filter life. Labconco recommends replacing the pre-filter every three months.Image(s) are representative of the product group and not necessarily the individual product.For Use With: 2 ft...

• May be adjusted to eight height positions prior to installation• Telelescoping legs are adjustable in 1 in. increments from 271/2 to 341/2 in.• Durable 13/4 in. tubular, epoxy-coated steel frame• Casters provide mobility for...

The Labconco Protector Echo Filtered Hood operates with one comprehensive Neurtrodine carbon filter to take the guesswork out of carbon filter choices, allowing simultaneous handling of solvents, acids, and bases with one filters.Image(s) are...

Labconco rear finish panel kits hides the hoods interior components. Recommended when hood is mounted on a casework island (and exposed on the back). Each kit includes a glacier white powder-coated steel panel to provide a finished appearance for the...

Screens that mount behind the baffles of a chemical fume hood for trapping tissue wipes and other small, loose materials which may be caught in the airflow. Each kit includes mounting hardware, powder-coated stainless steel screen and instructions...

Utility Shelves and Holders maximize the usable work surface within XPert Enclosures, Stations and Systems to make the workspace more efficient. Locate bottles, tissues and other items where they are needed.Utility Shelves: Three epoxy-coated steel...

Utility Shelves and Holders maximize the usable work surface within XPert Enclosures, Stations and Systems to make the workspace more efficient. Locate bottles, tissues and other items where they are needed.Tissue Holder: Epoxy-coated steel. Attaches to...

Kits include electrical receptacle, junction box, receptacle cover plate, and installation instructions. Electrical wiring not included.Image(s) are representative of the product group and not necessarily the individual product.Type: GFIType: Standard

Utility Shelves and Holders maximize the usable work surface within XPert Enclosures, Stations and Systems to make the workspace more efficient. Locate bottles, tissues and other items where they are needed.Bottle Holder: Epoxy-coated steel. Attaches to...

Seismic Brackets for securing a Telescoping Base Stand to the floor in earthquake-prone regions. Kit includes four stainless steel seismic brackets and hardware for attachment to the stand. Hardware to attach to the floor and installation required...

SoLo Hydraulic Lift Base Stands are designed to support Purifier Logic, Logic+ and Axiom Biosafety Cabinets and Paramount Ductless Enclosures. The stand may be lowered to allow the cabinet or enclosure to be transported through standard doorways as low...

Color-Smart HEPA Filters (2 each)• Filter Type: HEPA• Applicable Categories: Paramount Ductless Enclosures• Applicable Products: Paramount Duet Filtered Enclosures (pre-9/2008)• Enclosure Nominal Width: 3, 6• Filter...

Syringe kit and detector tubes are accessories used with a variety of filters and equipment.Image(s) are representative of the product group and not necessarily the individual product.AccessoriesAccessoriesFilter Applicarion: Acid- GasAccessoriesFilter...

For mounting on the left or right side of any Protector Hood with interior depth less than 37.7 in. Each kit includes one remotely-controlled gooseneck with brass valve and 0.375 in. diameter copper tubing and green fixture knob. Inlet tubing is not...

Cupsink and Turret Kit, polypropylene cupsink, 3 x 6, and chrome turret mount on right side wall. Plumbing pipe not included.• Weight: 5.0 lbs• Weight metric: 2.3 kg• Applicable Products: Basic Laboratory HoodsImage(s) are...

Carbon-based and HEPA filters used in a variety of Labconco enclosures require periodic replacement. Select the right filters to fit your Labconco product.• Enclosure Nominal Width: 6• Filter Flow Type: ExhaustImage(s) are representative of...

Color-Smart Carbon Filters (2 each). Required.• Filter Flow Type: Exhaust• Enclosure Nominal Width: 3, 6Image(s) are representative of the product group and not necessarily the individual product.Required AccessoriesFilter Application:...

An accessory for the Demonstration Hood, XPert Balance Enclosure, Protector XVS Ventilation Station or Protector Work Station, the FilterMate uses a HEPA filter, carbon-based filter or a combination of both filters to remove hazardous powders,...

Made of Type 304 stainless steel, each work surface features a 1 in. deep front spill trough and will fit the dimensions of Labconcos XPert and RXPert Systems and XPert Stations and Enclosures. No cupsink cutout.Image(s) are representative of the product...

For mounting in left or right side of any 3, 4, 5, 6, 7, or 8 ft. Protector Hood. Each Receptacle kit includes an electrical receptacle, wiring, junction box and receptacle cover plate. Image(s) are representative of the product group and not necessarily...

Telescoping Base Stands with Casters may be adjusted to eight height positions prior to installation. Telescoping legs are adjustable in 1 in. increments from 27.5 to 34.5 inches. Casters provide mobility for short distances, such as to gain access to...

This damper fitting allows you to balance airflow. It may be used with exhaust and auxiliary-air ducts, and is usually directly above the fume hood.Image(s) are representative of the product group and not necessarily the individual product.PVCDuct...

PVC coupling type reducers are designed for connecting thermoplastic duct of different diameters. Compare your blower inlet size with your duct size to see if one is necessary.Image(s) are representative of the product group and not necessarily the...

Allow the XPert Filtered Systems and XPert TXE Equipment Enclosures to be thimble-ducted to the outside for additional protection. The canopys air gap provides a means of balancing air by allowing room air to enter the ductwork and mix with the filtered...

Fiberglass Blowers are ideal for fume hood exhaust systems in moderate to highly corrosive conditions. They are offered in a broad range of capacities from 250 to 3500 CFM at static pressures up to 4.0 in. Fiberglass Blowers are not recommended for use...

Kits include stainless steel rods, connectors, instruction sheet and drill template.All Grid Kits can be used with the XL Benchtop Protector Hood unless otherwise noted. The 4 feet, 5 feet, 6 feet and 8 feet Grid Kits can also be used with the Premier,...

For any Protector Hood with interior depth less than 37.7in. Each kit includes one remotely-controlled, white epoxy-coated,brass rigid/swivel gooseneck with brass valve and 0.25 in. diameter copper tubing, one green fixture knob and one redfixture knob...

For mounting on the left or right side of a Protector Hood. Each kit includes one remotely-controlled service fixture with valve and 0.25 in. diameter tubing, color-coded fixture knob, and color-coded hose connector. Inlet tubing is not included...

Glacier white, powder-coated, 16 gauge steel. Designed to hook on the lower rear horizontal cross member of the Telescoping Base Stand. Provides storage space for wipes, cleaning agents, gloves and other miscellaneous laboratory supplies. One each...

• 3 ft. hoods require 2 pre-filters (2 x Cat. No. 346-14335)• 4 ft. hoods require 2 pre-filters (2 x Cat. No. 346-14344)• 5 ft. hoods require 3 pre-filters (2 x Cat. No. 346-14335 plus 1 x Cat. No. 346-14344)• 6 ft. hoods require...