FUME HOOD ACCESSORIES

A quick and easy way to test the safety of fume hood exhaust before use. Just a squeeze or two from the plastic bottle dispenses a cloud of ultra-fine, lightweight silica powder, which remains suspended long enough to visually check whether or not the...

These economical Remote Blowers provide the lower exhaust capacities and static pressure losses needed for small enclosures. Protector XVS Ventilation Stations, Protector Demonstration Hoods and Protector Work Stations that are ducted to the outside are...

Recommended for Axiom™ Class II, Type C1 Biosafety Cabinets. Mounts atop the duct collar to adjust exhaust airflow and closes for decontamination procedures. Manually adjustable. Type 304 stainless steel. 10 in. (25.4 cm) high with 10 in. (25.4 cm)...

Flexible Hose Kits for connection between the Air-Tight Damper (sold separately, Cat. No. 496-27848) and exhaust ductwork to limit vibration from the mechanical system. 10 in. nominal diameter. Include spiral flexible tubing and clamps.Image(s) are...

Adapter, 5 in. nominal diameter x 6 in. nominal diameter, powder coated steel, for connecting a 2, 3 or 4 ft. XPert Balance System with Caopy Connection or a 2, 3, 4 ft. XPert Balance Station to a FilterMate Portable Exhauster with Flexible Hose...

Glacier white, powder-coated, 16 gauge steel. Designed to hook on the lower rear horizontal cross member of the Telescoping Base Stand. Provides storage space for wipes, cleaning agents, gloves and other miscellaneous laboratory supplies. One each...

Blue anodized aluminum blocks hold tubes upright and promote conduction of heat or cold from the Temp-Zone area on selected models of Purifier Cell Logic Biosafety Cabinets to help maintain sample temperature.Image(s) are representative of the product...

Mounts in vertical duct run to prevent reverse pressurization of the exhaust system. 3.0 in. (8 cm) hgh with 10 in. (25.4 cm) O.D. inlet and outlet. Dampers adjust the biosafety cabinets exhaust airflow.Image(s) are representative of the product group...

• May be adjusted to eight height positions prior to installation• Telelescoping legs are adjustable in 1 in. increments from 271/2 to 341/2 in.• Durable 13/4 in. tubular, epoxy-coated steel frame• Casters provide mobility for...

For converting Hydraulic Lift Stands (Cat. No. 496-27854, 496-27872, 496-27857, and 496-27875) to mobile stands. Includes four 5 in. (13 cm) diameter, non-marking polyurethane casters with toe locks and bearings. Load rating for each caster is 250 pounds...

For converting Telescoping Base Stands with Fixed Feet to mobile stands. Kit includes four 5 in. diameter, non-marking polyurethane casters with toe locks. Load rating for each caster is 250 pounds. Casters have bearings for quiet operation, and replace...

Coated Steel Belt Driven Blowers have been specifically designed to meet the demanding day-to-day ventilation requirements for a wide range of hood choices. Durable and easy to maintain, Coated Steel Blowers are the recommended accessory for fume hoods...

For mounting on the left or right side of any Protector Hood with interior depth less than 37.7 in. Each kit includes one remotely-controlled gooseneck with brass valve and 0.375 in. diameter copper tubing and green fixture knob. Inlet tubing is not...

Color-Smart Carbon Filters (2 each). Required.• Filter Flow Type: Exhaust• Enclosure Nominal Width: 3, 6Image(s) are representative of the product group and not necessarily the individual product.Required AccessoriesFilter Application:...

Color-Smart HEPA Filters (2 each)• Filter Type: HEPA• Applicable Categories: Paramount Ductless Enclosures• Applicable Products: Paramount Duet Filtered Enclosures (pre-9/2008)• Enclosure Nominal Width: 3, 6• Filter...

Includes three mounting stainless steel hooks and three carabiners. The hooks mount to the rear grille and the carabiners secure power cords and tubing along the rear wall to keep them contained and away from the work area.Applicable Products: PuriCare...

Cupsink and Turret Kit, polypropylene cupsink, 3 x 6, and chrome turret mount on right side wall. Plumbing pipe not included.• Weight: 5.0 lbs• Weight metric: 2.3 kg• Applicable Products: Basic Laboratory HoodsImage(s) are...

Kits include stainless steel rods, connectors, instruction sheet and drill template.All Grid Kits can be used with the XL Benchtop Protector Hood unless otherwise noted. The 4 feet, 5 feet, 6 feet and 8 feet Grid Kits can also be used with the Premier,...

Allow the XPert Filtered Systems and XPert TXE Equipment Enclosures to be thimble-ducted to the outside for additional protection. The canopys air gap provides a means of balancing air by allowing room air to enter the ductwork and mix with the filtered...

These stands have a built-in hydraulic lift so that height may be adjusted at any time. They allow the user to position the stand and the safety cabinet it supports to accommodate people of different heights and wheelchair-bound users, to transport...

For mounting in left or right side of any 3, 4, 5, 6, 7, or 8 ft. Protector Hood. Each Receptacle kit includes an electrical receptacle, wiring, junction box and receptacle cover plate. Image(s) are representative of the product group and not necessarily...

Kits include electrical receptacle, junction box, receptacle cover plate, and installation instructions. Electrical wiring not included.Image(s) are representative of the product group and not necessarily the individual product.Type: GFIType: Standard

Fiberglass Blowers are ideal for fume hood exhaust systems in moderate to highly corrosive conditions. They are offered in a broad range of capacities from 250 to 3500 CFM at static pressures up to 4.0 in. Fiberglass Blowers are not recommended for use...

Syringe kit and detector tubes are accessories used with a variety of filters and equipment.Image(s) are representative of the product group and not necessarily the individual product.AccessoriesAccessoriesFilter Applicarion: Acid- GasAccessoriesFilter...

An accessory for the Demonstration Hood, XPert Balance Enclosure, Protector XVS Ventilation Station or Protector Work Station, the FilterMate uses a HEPA filter, carbon-based filter or a combination of both filters to remove hazardous powders,...

Cat No. 626-10062: Flexible Hose, 5 in. I.D., clear urethane, smooth bore with white helix, static dissipative, suitable for pharmaceutical and cleanroom applications. For use with FilterMate Portable Exhauster. Length is 8 feet. Includes two clamps.Cat...

Used with carbon-based and HEPA filters in a variety of Labconco enclosures which require periodic replacement.Image(s) are representative of the product group and not necessarily the individual product.Type: FilterStyle: ReplacementSize (ft.): 3Type:...

Sense and alert the operator to low airflow conditions. From the monitors face plate, the user can easily select and calibrate a set point between 30 and 250 fpm using a velocity meter and a screwdriver. Audible/visual alarm. Includes night setback,...

Guardian™ Digital Airflow Monitor senses and alerts the operator to low airflow conditions. LCD displays actual airflow in fpm or m/sec. Audible/visual alarm alerts the user to sustained low velocity condition. Calibration instructions displayed on...

Utility Shelves and Holders maximize the usable work surface within XPert Enclosures, Stations and Systems to make the workspace more efficient. Locate bottles, tissues and other items where they are needed.Bottle Holder: Epoxy-coated steel. Attaches to...

Utility Shelves and Holders maximize the usable work surface within XPert Enclosures, Stations and Systems to make the workspace more efficient. Locate bottles, tissues and other items where they are needed.Tissue Holder: Epoxy-coated steel. Attaches to...

Carbon-based and HEPA filters used in a variety of Labconco enclosures require periodic replacement. Select the right filters to fit your Labconco product. Applicable Products: PuriCare Procedure Stations (pre-2008), Purifier Cell Logic & Cell Logic+...

For any Protector Hood with interior depth less than 37.7in. Each kit includes one remotely-controlled, white epoxy-coated,brass rigid/swivel gooseneck with brass valve and 0.25 in. diameter copper tubing, one green fixture knob and one redfixture knob...

Allows display of inflow and downflow velocities on the LCD information center. Includes sensor, wiring harness and hardware. Installation and certifier calibration are required. Applicable Products: PuriCare Procedure Stations (2013 and newer), Purifier...

Stainless steel shelf mounts to rear grille and provides 8 x 5 in. surface to place supplies. Weight capacity of 2.2 lbs (1 kg).Applicable Products: PuriCare Procedure Stations (pre-2008), Purifier Cell Logic & Cell Logic+ Biosafety Cabinets,...

Interior shelf kits for storage cabinets. Include powder-coated steel shelf and mounting hardware. Shelf may be mounted at one of three heights: 13 in., 15.25 in., or 17 in. (9.5 in., 12.25 in., or 13 in. for ADA height cabinets).Image(s) are...

Kit includes IV bar, mounting hardware and four hangers. Installation is required.Image(s) are representative of the product group and not necessarily the individual product.For Use With: 3 ft. modelsFor Use With: 4 ft. modelsFor Use With: 5 ft...

Support intravenous solution bottles and bags. Each includes IV bar, mounting hardware, four hangers and instructions for installation. Three-foot, four-foot and five-foot Purifier Horizontal Clean Benches accommodate one IV bar. Six-foot and eight-foot...

For use with Purifier Vertical Clean Benches and Filtered PCR Enclosures. IV Bar supports intravenous solution bottles and bags. Includes IV bar, mounting hardware, four hangers and instructions for installation.Image(s) are representative of the product...

For mounting to the front leg of the Telescoping Base Stand.Laptop Computer Arm securely supports a laptop computer within easy view of an operator at the Purifier Logic Biosafety Cabinet, Purifier Cell Logic Biosafety Cabinet or PuriCare Procedure...