ACCESSORIES

Tube Holder holds twenty-four 1.5/2 mL microtubes horizontally. Holder snaps on to any Vortex-Genie 2 Mixer and the Vortex-Genie Pulse. No additional attachment necessary.Image(s) are representative of the product group and not necessarily the individual...

Tube Holder holds six 50 mL tubes horizontally. Holder snaps on to any Vortex-Genie 2 Mixer and the Vortex-Genie Pulse. No additional attachment necessary.Image(s) are representative of the product group and not necessarily the individual product.No. of...

This accessory adds horizontal orbital shaking capability to units with variable speed of 15 to 100 rpm, which is ideal for Western Blots and for maintaining cells or solutions in suspension. Simply remove the existing Magnetic Platform and attach the...

These longer, stiffer bumpers replace the existing bumpers on the MicroPlate Genie, Digital MicroPlate Genie Pulse, Multi-MicroPlate Genie, and Digital Multi-MicroPlate Genie Pulse Mixers, to accommodate the taller PCR Plates. Please note that (4) kits...

Magnetic platform features unique spring clip plate system. Pair with clip plates (sold separately) to hold a wide variety of tubes, flasks, microplates, bags, and odd-shaped vessels at any angle. Platform dimensions: 11.5 x 12.5 in. (290 x 315 mm)...

Replacement Mat which goes underneath the microplate. Replacement part for the MicroPlate Genie (Catalog No. 360-77645).Image(s) are representative of the product group and not necessarily the individual product.

This is the mat for the Multi-MicroPlate Genie (Cat. No. 360-77648), which goes underneath the microplates. Please note that you will need (2) mats for the Multi-MicroPlate Genie.Image(s) are representative of the product group and not necessarily the...

Microplate Adapter for Applied BiosystemsSpecified attachment for Applied Biosystems Microplate Protocols. Holds your Applied Biosystems microplate in place on any of the Vortex-Genie 2 family of mixers.Replacement Elastic BandsElastic Bands for the...

A microplate foam insert for Vortex-Genie MAX. Each insert securely holds two microplates. Image(s) are representative of the product group and not necessarily the individual product.

The 120V Motor Assembly can be easily installed using a 1/4 in. nut driver and then re-attaching the wires. Replacement part for Vortex-Genie 2 (Catalog No. 360-10003) and Vortex-Genie 2T (Catalog No. 360-10025)††Please note, if your current...

Grey silicone mat is an alternative to flask clamps or roller bars for securing vessels to shaker platform of Orbital-Genie Shaker for low speed. It is ideal for containers such as bottles and dishes that cannot be held with conventional clamps or roller...

The 120V Line Cord kit includes a strain relief. The Line Cord can be easily installed using pliers.Image(s) are representative of the product group and not necessarily the individual product.

This is the Potentiometer that mounts on the front of the unit, which controls the speed. Replacement part for Roto-Shake Genie (Catalog No. 360-10191).Image(s) are representative of the product group and not necessarily the individual product.

The Digital Control Panel is used on the 120V, 230V and 100V Digital Vortex-Genie 2 (Cat. No. 360-77600) and AB Digital Vortex-Genie 2 (Cat No. 360-77603) Mixers. Thread the cable through the slot in casting. Peel and Stick Adhesive back adheres keypad...

The Digital Timer Board can be easily installed. Attaches with four mounting screws from inside of the unit. Replacement part for 120V, 230V and 100V Digital Vortex-Genie 2 (Cat. No. 360-77600) and AB Digital Vortex-Genie 2 (Cat. No. 360-77603) Mixers...

The Spring, Extension, Eccentric can be easily attached from the Eccentric Clamp to the Bottom of the Motor Mounting Plate. Replacement part for Vortex-Genie 2 Mixers (Catalog No. 360-10003, 360-77600, 360-77603, 360-10025).Image(s) are representative of...

Rubber bumper that holds microplate in place. Used on the MicroPlate Genie (Cat. No. 360-77645) and Multi-MicroPlate Genie (Cat. No. 360-77648). Simply pull off old bumper and push-on new bumper. Please note that the MicroPlate Genie uses (2) bumpers and...

5 x 20 mm, 0.5 amp Replacement Fuse for all voltages of the Roto-Shake Genie (Cat. No. 360-10191) and Rotator Genie (Cat. No. 360-78040 and 360-78043).Image(s) are representative of the product group and not necessarily the individual product.

Knob on the right of the unit, used to secure the Magnetic Platform Assembly. The Nylon Washer is used on the Lock Shaft. Replacement parts for Roto-Shake Genie (Catalog No. 360-10191).Image(s) are representative of the product group and not necessarily...

The Micro Switch can be easily installed using a philips head screw driver. Please note, this micro switch has two tabs. Replacement part for Vortex-Genie Mixers (Catalog No. 360-10011, 360-10003, 360-77600, 360-77603, 360-10025).Image(s) are...

The 120V Motor Assembly can be easily installed using a 1/4 in. nut driver and then re-attaching the wires. Replacement part for Digital Vortex-Genie 2 (Cat. No. 360-77600) and AB Digital Vortex-Genie 2 (Cat. No. 360-77603) Mixers.Image(s) are...

The 120V Motor Assembly can be easily installed using a 1/4 in. nut driver and then re-attaching the wires. Replacement part for the MicroPlate Genie (Cat. No. 360-77648) and Multi-MicroPlate Genie (Cat. No. 360-77645).Image(s) are representative of the...

The 120V Motor Assembly can be easily installed using a 1/4 in. nut driver and then re-attaching the wires. Replacement part for the Vortex-Genie 1 (Catalog No. 360-10011).Image(s) are representative of the product group and not necessarily the...

Optical Sensor Switch for Optical Encoder Disc. Replacement part for Digital MegaMag Genie (Catalog No. 330-77654) and MegaMag Genie LR Digital (Catalog No. 330-98923).Image(s) are representative of the product group and not necessarily the individual...

This Power Supply Board is used on all voltages of the Roto-Shake Genie (Cat. No. 360-10191) and Rotator Genie (Cat. No. 360-78040 and 360-78043).Image(s) are representative of the product group and not necessarily the individual product.

Replacement Power Switch that illuminates red for the 120V models of the RotoShake Genie (Cat. No. 360-10191), Rotator Genie (Cat. No. 360-78040 and 360-78043), MegaMag Genie (Cat. No. 360-77651, 330-77654, and 330-98923), and QuadMag Genie (Cat. No...

Replacement Push-On Knob for Vortex-Genie 2 Vortex Mixers. Can be easily installed by gently pulling off the old knob and pushing on the new knob.Image(s) are representative of the product group and not necessarily the individual product.

This 120V Speed Control was used on Vortex-Genie 2 mixers produced after the year 2000. It can be easily installed. The part in your unit should look the same as the picture.Image(s) are representative of the product group and not necessarily the...

Knob on the front of the unit to control speed. Replacement part for Roto-Shake Genie (Cat. No. 360-10191) and Rotator Genie (Cat. No. 360-78040 and 360-78043).Image(s) are representative of the product group and not necessarily the individual product.

This Speed Control Knob was used in Vortex-Genie 2 mixers that were produced prior to the year 2000. It contains a set screw for attaching to the Rheostats and has a silver cap. This knob is used on the 120V, 230V and 100V Rheostats only.Image(s) are...

This kit contains a toggle switch that can be easily installed. Replacement part for Vortex-Genie 2 (Catalog No. 360-10003). Please note, although the switches look the same this switch can not be used on the Vortex-Genie 2T mixer. Image(s) are...

The Timer Board is used on the 120V, 230V and 100V Analog MicroPlate Genie (Cat. No. 360-77645) and Analog Multi-MicroPlate Genie (Cat. No. 360-77648).Image(s) are representative of the product group and not necessarily the individual product.

The Timer Board Kit is used on 120V, 230V and 100V Vortex-Genie 2T Mixers (Catalog No. 360-10025). This kit contains the Timer Board and Toggle Switch.Image(s) are representative of the product group and not necessarily the individual product.

Replacement rubber feet made of shock absorbing Sorbothane rubber. Kit includes rubber feet plus four mounting screws, which can easily be mounted using a standard screwdriver. • Catalog No. 360-77858 fits on MicroPlate Genie (models SI-0400...

A tall non-skid metal tray that can be stacked onto the Roto-Shake Genies existing tray (supplied with product) to ROCK various containers including T-flasks, petri dishes, boxes, and sealed bags, increasing the capacity for rocking by double-stacking...

Standard platform is designed to turn 90 degrees allowing different mixing motions. Retaining bands hold a wide variety of tubes, flasks, microplates, bags, and odd-shaped vessels at any angle. Platform dimensions: 10.25 x 10.25 in. (260 x 260 mm)...

Each Tube Rack holds up to 12 tubes for the Multi Vortex-Genie (Cat. No. 360-77660). Accommodates tubes of any material type, up to 29 mm diameter.Image(s) are representative of the product group and not necessarily the individual product.

Tube rack for Vortex-Genie MAX. Each tube rack holds up to 10 tubes.Image(s) are representative of the product group and not necessarily the individual product.

Patented TurboMix attachment permanently mounts to most existing Vortex-Genie 2 family of mixers and the Vortex-Genie Pulse to provide extremely vigorous mixing of up to twelve 1.5 mL or 2.0 mL microtubes (snap-top or screw-cap) through a combination of...

Extra ratcheting clamp for additional rows for Orbital-Genie Benchtop Shaker with Ratcheting Clamps (Catalog No. 360-77663).Image(s) are representative of the product group and not necessarily the individual product.