ACCESSORIES

The stirring blades are made of chemically resistant polypropylene and are fixed to a PP-covered steel rod.Diameter of rod is 8 mm (approximately 5/16) x 350 mm (approximately 133/4 in.) long.Polypropylene stirrers are listed below as ordered in image...

Equipment dust cover is made of transparent acrylic with an opening for the power cord(s). The Instrument Dust Cover offers an inexpensive way to help protect instruments. Small handle on top allows for easy removal. Dimensions: (L x W x H) 15 x 12 x 8...

Foxx Life Sciences Teras Turbine, Adapter, Gas MixSpecifications• Diameter: 0.87 in. (22 mm)• Height: 1.57 in. (40 mm)Image(s) are representative of the product group and not necessarily the individual product.

Next Generation Mixing Technology from Foxx Life Sciences, the Teras Turbine™ has four mixing modes: Top Anaerobic, Top Aerobic, Full Mixing, and Bottom Mixing. Top Anaerobic is ideal for mixing of less viscous material at the top of the carboy or...

Next Generation Mixing Technology from Foxx Life Sciences, the Teras Turbine™ has four mixing modes: Top Anaerobic, Top Aerobic, Full Mixing, and Bottom Mixing. Top Anaerobic is ideal for mixing of less viscous material at the top of the carboy or...

Next Generation Mixing Technology from Foxx Life Sciences, the Teras Turbine™ has four mixing modes: Top Anaerobic, Top Aerobic, Full Mixing, and Bottom Mixing. Top Anaerobic is ideal for mixing of less viscous material at the top of the carboy or...

Foxx Life Sciences Teras Turbine, Connector, Electrical, Cable, Male and Female• Length: 78.7 in. (2000 mm)Image(s) are representative of the product group and not necessarily the individual product.Fitting: FemaleFitting: Male

Foxx Life Sciences Teras Turbine, Connector, Rod, Teras Turbine Mixer Shaft to Motor• Diameter: 0.79 in. (20 mm)• Height: 1.2 in. (31 mm)Image(s) are representative of the product group and not necessarily the individual product.

Stainless-steel, 3-bladed propeller .For general purpose mixing applications. Blades can be bent to desired pitch.Shaft diameter is 5/16 in. (7.9 mm).Image(s) are representative of the product group and not necessarily the individual product.

PTFE nut and bolt replacement set.Image(s) are representative of the product group and not necessarily the individual product.Weight: 0.1

Glas-Col Stainless-steel, 3-bladed paddle, 2.5(63.5 mm) dia. on 5/16(7.9 mm) dia. shaft. High efficiency paddle for viscous liquids or semi-solids.Image(s) are representative of the product group and not necessarily the individual product.Shaft Length...

PTFE Stirring BearingsImage(s) are representative of the product group and not necessarily the individual product.Minimum Joint Size: 24/40Weight: 0.3Diameter: 10 mmMinimum Joint Size: 29/42Weight: 0.3Diameter: 10 mmMinimum Joint Size: 45/50Weight: 0...

PTFE Stirring BladesImage(s) are representative of the product group and not necessarily the individual product.Minimum Joint Size: 24/40Product Weight (lbs): 0.1For Vessel Size: 100 - 500 mLSize: 19 x 48 mmMinimum Joint Size: 24/40Product Weight (lbs):...

Stirring Shafts w/PTFE Nut and BoltImage(s) are representative of the product group and not necessarily the individual product.Weight: 0.4O.D.: 10 mmShaft Length: 445 mmWeight: 0.4O.D.: 10 mmShaft Length: 515 mm

The tilt angle and speed on the Blot Mixers have been optimally set for gentle, yet thorough mixing in gel trays, boxes and other flat vessels. They are offered in two platform sizes (mini and large), and come standard with autoclavable flat mats that...

Globe Scientific Glass Stirrer Rods• Solid glass construction• Ideal for use with blood collection• 6 x 9 mmImage(s) are representative of the product group and not necessarily the individual product.

These versatile mixers are designed for thorough, foam-free mixing in tubes. They are offered in two platform sizes, and come standard with an autoclavable dimpled mat to hold tubes in place. Both sizes offer maintenance free brushless motors and are...

• Designed for use with Globe Scientific Model 520 Nutating 3D Platform Mixers• Doubles working surface area of the nutating 3D platform mixer• Dimensions (L x W): 10.5 x 7.5 in.• Includes black rubber mat with flat...

• Designed for use with Globe Scientific Model 520 Nutating 3D Platform Mixer• Doubles working surface area of the nutating 3D platform mixer• Dimensions (L x W): 10.5 x 7.5 in.• Includes black rubber mat with flat surfaceImage(s)...

Stainless Steel Rod Stand for 508 Hotplate Stirrers, 300 mm• Support rod for thermometers and probes• Designed for use with Globe Scientific Model 508 Hotplate Stirrers• Corrosion-resistant stainless steel constructionImage(s) are...

These stainless steel stirrers create tangential flow, high shearing rate at the edges, and minimum deposits on vessel walls. Great for polymer reactions and even distribution of high mineral contents in liquids. Ideal for medium to highly viscous fluids...

AS 1.6 Clamping Device for AS 501.1 (Cat. No. 340-52309) Universal Attachment.Image(s) are representative of the product group and not necessarily the individual product.

These stainless steel blade stirrer generate a radial flow. For drawing the material to be mixed from the top and bottom. For aerating of low viscosity media and for homogenizing solids in liquids. Used at medium to high speeds.Image(s) are...

Two-bladed stainless steel stirrers whos blades open with increasing speed. Perfect for stirring in round vessels with narrow necks. The effect is similar to that of a 4-bladed propeller stirrer. Medium to high speeds required. Accepted by overhead...

The variety of media to be processed also requires a variety of rotor-stator configurations and seals. In many cases it is neccessary to use subsequently two dispersing elements, for pre-crushing and fine crushing. The plug-in connectors facilitate the...

Required for stirring tasks using glass stirring rods. The flexible coupling compensates for any structural variances. Image(s) are representative of the product group and not necessarily the individual product.Clamping Range (mm): 6 - 10Maximum Torque...

• For fastening the holding rod H 38 to the support rod H 16 V• Cast aluminum• For stand diameters: 10 to 11 mm• For extension arm diameter: 11 mm• Max. length of extension arm: 200 mm• Max. load: 1 kg• Max...

Stainless steel support rod for all magnetic stirrers with M 10 threaded bushing. • Diameter: 10 mm • Length: 450 mm • Material: stainless steel (AISI 304)Image(s) are representative of the product group and not necessarily the...

For fastening a temperature sensor or ETS-D5/6 (Cat. No. 330-99085 / 330-99088) with a boss head H 44 (Cat. No. 330-29152) to the support rod H 16 V (Cat. No. 330-23068).Image(s) are representative of the product group and not necessarily the individual...

IKAFLON Round, PTFE-coated, magnetic stirring bars. A general purpose stirring bar for use in a wide variety of universal applications.Image(s) are representative of the product group and not necessarily the individual product.Length (mm): 10Diameter...

These stainless steel paddle stirrers create tangential flow, minimum turbulence, good heat exchange, and gentle treatment of product. Used at low to medium speeds. Accepted by overhead stirrer motors with corresponding output shaft/chuck diameter...

• Cable 2 RS232• 9-pin male/female• Length: 3 metersImage(s) are representative of the product group and not necessarily the individual product.

PC 1.2 Adapter, 25 pins.Image(s) are representative of the product group and not necessarily the individual product.

PC 1.4 Adapter.Image(s) are representative of the product group and not necessarily the individual product.

Cable for connecting equipment to PC. Length: 2.5 meters.Image(s) are representative of the product group and not necessarily the individual product.

PC 2.1 Cable for use with Labworldsoft. Image(s) are representative of the product group and not necessarily the individual product.

Adapter, 9 pins (F), 25 pins (M).Image(s) are representative of the product group and not necessarily the individual product.

Cable for connecting equipment to PC. Length: 3 meters.Image(s) are representative of the product group and not necessarily the individual product.

PC 5.1 Adapter.Image(s) are representative of the product group and not necessarily the individual product.

Up to 4 lab units can be controlled through the ethernet with the PC 4.1 RS 232 server. The server supports 4 RS 232 ports with a 10/100 mbps ethernet interface by TCP/IP. The server can be set-up through the ethernet and works as a transparent serial...