SAMPLERS

A smooth, tapered, stainless sampler for extracting a plug of material from bags or blocks. Sharp end of the satin finish sampler will cut through a bag or box. Twisting the handle one-half turn will cut out a plug of material 15.2 cm (6 in.) long...

For taking samples of water, sewage, wastes and effluents from lakes, streams, tanks, or ponds, the water sample dipper provides a long reach for otherwise inaccessible spots. • 1000 mL graduated polypropylene plastic pitcher mounted on an aluminum...

Excellent for sampling from tank cars, tank trucks and barges, these samplers are well suited for sodium hydroxide, potassium hydroxide, hydrochloric acid, acetic acid, formaldehyde, sulfuric acid, etc. • Constructed of a 500 mL (16 oz)...

• Dippas™ are designed for sample collection and despatch from one source, thus eliminating the risk of cross contamination• Dippas are available in transparent polystyrene• Handles are easily removable, facilitating...

Stainless steel replacement tip, nut and stem ONLY. For applications requiring 90° cones. ASTM D217, D937 ASA Std. Z11.3.Image(s) are representative of the product group and not necessarily the individual product.

Penetration Needle for Food, Paste, and Paints; U.S. Dept. of Agriculture. Hollow 90° aluminum cone and tip. Weight: 35 gImage(s) are representative of the product group and not necessarily the individual product.

Hollow 90° magnesium cone and plunger. Total cone weight: 30.0 g. Supports the following standards: ASTM D2884Image(s) are representative of the product group and not necessarily the individual product.

Grease-testing penetrometers; ASTM D217, D937 ASA Std. Z11.3;• H-2520 (Cat. No. 621-10206): Hollow 90° brass cone. Removable nut and stem. Weight: 102.5 g.• H-2522 (Cat. No. 621-10209): Hollow 90° stainless steel cone, highly polished...

Recovery of used grease / small obtainable samples; ASTM D1403, 1/4 scale. (Not considered a substitute for full-size cone specified in ASTM D217.) Weight: 9.38 g. The Penetration Needle, Recovery of Used Grease, Small Samples, ASTM D1403 supports the...

Joint sealant for asphalt & concrete pavements; ASTM D5329, Resilience ball penetration tool. Total weight: 27.5 g. The Joint Sealant for Asphalt & Concrete Pavements ASTM D5329 supports the following standards: ASTM D5329.Image(s) are representative of...

Measuring firmness of solid and plasticized fats: shortenings, butter, margarine. AOCS Cc 16-60, 20 aluminum cone, 3.2 mm ferrule, 0.8 mm stainless steel blunt tip. Overall length 106 mm. Weight: 45 g.Image(s) are representative of the product group and...

Hardened stainless steel tip with special plunger. Image(s) are representative of the product group and not necessarily the individual product.

Waxes with 250 or less penetration; ASTM D1321; Hardened stainless steel wax penetration needles with tapered point, blunt tip of truncated cone. Ferrule is approx. 3.2 mm diameter. Weight: 2.5 g. The Penetration Needles, Waxes supports the following...

Lighter and smaller than H-1200 (Cat. No. 341-86647) for field work, units micrometer adjusts for accurate settings, as well as coarse adjustment for approximate settings. Only one additional 50 g loading weight is included with a H-1280 needle (Cat. No...

The H-1240D penetrometer adds a digital gauge to the H-1240 electric penetrometer (Cat. No. 341-86650) to provide precise at-a-glance readings, as well as the ability to automatically start a test with a button push and have the test end after a preset...

Takes the H-1200 universal penetrometer (Cat. No. 341-86647) and adds an automatic digital timer to it. The timers release mechanism is switchable between seconds minutes, or hours. Timer may be set in 1/10th second intervals. Plunger releases with push...

Direct-reading instrument for precision penetration measurements of bituminous materials, cement, petrolatum and waxes, as well as food, cosmetics and pharmaceutical products. Unit has 5 in. diameter indicator dial, graduated in 400 divisions of 0.1 mm,...

Provides an efficient method of preparing subsamples of collected water-sediment mixtures from stream flows for water quality analysis. Water sediment samples are poured into the sample splitter where they are composited into one representative cross...

These V-shaped spatulas are ideal for every type of powdered or granulated material. Sterileware Spatulas (Cat. No. 154-22678 and 974-24403) are made of high-impact polystyrene, individually packaged, sterilized by gamma irradiation, lot stamped, and...

Simple disposable sampler for taking samples of low viscosity media. If the DispoPipette is inserted into the liquid opened, an all-layer sample is obtained. If it is closed while it is inserted up to the sampling point and then opened, a target point...

The ergonomic handle of the DispoTube makes it easier to work and facilitates a good grip even under difficult conditions, for example with gloves. Disposable sampler for taking samples of liquids.• Ergonomic handle• All-layer and target...

The LiquiDispo disposable sampler can be used to take sample of liquids from highly liquid to slightly viscous. An ergonomic handle makes it easier to draw the sample: up to 200 mL can be drawn, as with a syringe.• Ergonomic handle• No...

The ViscoDispo disposable sampler can be used to take samples of high-viscosity media up to 100.000 mPas. The ergonomically shaped handle and the very stable drawbar make it easy to draw even viscous substances.• Ergonomic handle• No...

Especially small sample quantities (10 mL) can be taken with MicroDispo. In pharmaceutical applications especially it often happens that only a small quantity can or should be extracted for analysis. Using the disposable sampler, precise target point...

The DispoLance disposable sampler can be used for taking large and small sample quantities quickly and easily, directly from bags. The sampler is suitable for free-flowing powders and small-grain granulates. The DispoLance sampler pierces into the...

Disposable sampler for powders and small-grain bulk materials. Because the tip is closed, the sample material cannot trickle back out of the sample lance. DispoPicker is ideally suited for cross-section samples.• HDPE• Cleanroom...

PowderDispo is the ideal disposable sampler for cross-section samples of powdery or slightly cohesive substances. A complete all-layer sample can be taken from bags or smaller containers with the lance.• HDPE• Cleanroom manufactured•...

TargetDispo is used to take a target point sample at a position in the sample material that has previously been precisely determined. The sampler pierces into the powder or granulate while closed. When it reaches the sample removal point it is opened and...

The ZoneDispo disposable all-layer sampler is used in sampling to collect a representative all-layer sample from three different layers. Suitable for free-flowing powders and small-grain granulates. The collected sample can be secured and transported in...

Disposable zone samplers for taking samples from multiple layers of the sample material. Suitable for free-flowing powders and small-grain granulates. The representative all-layer sample can be emptied directly through the open handle into a sample...

Bellows samplers provide quick and easy liquid sampling with one hand operation.• FDA grade polyethylene sampler tube• Long tapered top with a 4 mm openingImage(s) are representative of the product group and not necessarily the individual...

An important tool for sampling powders, pellets, and other friable materials which may become non-homogeneous in the container. These samplers are made of anodized aluminum and have a sharp, stainless steel point. The T-handle is turned to close the...

Complete range of white polystyrene cutlery. Individually packaged in tamper evident single bags. Traceability on each bag. Raw material is compliant with regulation EC N DEG 1935/2004 for food contact. Sterility Assurance Level based on ISO 11137:...

Blue polypropylene dipper container with screw cap (90 mL size has hinged lid) and removable handle. Shock resistant. Packaged individually in tamper evident single zip bags. Traceability information on each bag. Sterile SAL 10-3. Raw material is...

Totally inert and non-contaminating. Extendable screw-in shafts have a steel core for rigidity and are fully encapsulated in PTFE.The basic unit consists of a beaker with a single 24 in. (600 mm) shaft. Replacement shaft available separately.Image(s) are...

Eliminates the cost of separate sterile bags or containers, saving time and money in the sample collection process. These high impact polystyrene scoops with detachable lids have a longer handle that increases the distance between the hand and sample,...

Perfect size and shape for taking samples, especially from wide mouth containers. Designed to hold various capacities. One piece scoops made of high impact polystyrene are individually sealed an sterilized in a polyethylene bag. 2 and 4 oz sampling...

Fabricated, HDPE scoops with many industrial applications. Large medium weight polyethylene scoops are available in 1/2 gallon and 1 gallon capacities.• Cat. No. 141-12131: Large, approximately 1 gallon capacity. Bowl size is 8 in. diameter x 91/2...

Stainless Steel ScoopsImage(s) are representative of the product group and not necessarily the individual product.

Enclosed Sample Splitters are ideal for dusty samples, includingcoal, coke and chaff. Humboldt splitters are constructed of cold-rolled steel, or in some cases, stainless steel. All splitters include pans, scoop and cleaning brush. Meet ASTM C702, D410,...