Labconco® FreeZone® Legacy™ Benchtop Freeze Dry Systems

FreeZone® Legacy™ 6 Liter Benchtop Freeze Dryers are designed for light to moderate aqueous sample loads. These models are not for use with samples containing acetonitrile. Removes a maximum of 4 liters of water in 24 hours.

• Brushed stainless steel and powder-coated steel exterior
• Stainless steel or PTFE-coated collector chamber and coil
• LCD that displays system operating parameters
• Set-up parameters and alarm messages (choice of temperature in °C and °F, choice of vacuum in mBar, Pa and Torr)
• 3/4 hp CFC-free refrigeration system
• Red alarm light
• LED vacuum and temperature wave graphs
• Patented moisture sensor
• Vacuum control/break valve
• Rear-mounted RS-232 port
• Automatic start-up switch for collector cool-down and vacuum pull-down with manual override switches
• Retractable collector drain line
• 3 in. diameter port for connection of drying accessory
• Power switch; rear-mounted electrical receptacle for vacuum pump connection (pump not included); 3/4 in. O.D. vacuum connection; 3/4 in. I.D. vacuum hose; and two clamps

Required Accessories (sold separately):
• Vacuum pump with a displacement of at least 86 liters per minute, 0.002 mBar ultimate pressure and fitting suitable for 3/4 in. I.D. vacuum hose
• Drying accessory
• Freeze dry glassware (if not bulk freeze drying)

Freeze drying rate will be lower for samples other than shell-frozen plain water. For optimum performance, room temperature should be 21°C (70°F) or colder.
Image(s) are representative of the product group and not necessarily the individual product.

Capacity (L): 6
Overall Dimensions W x D x H in. (cm): 31.8 x 28.1 x 14.5 (80.8 x 71.4 x 36.8)