Thermo Scientific* SilTite* Replacement Ferrules , Nuts and Baseplate Seals

Eliminate leaks with the Thermo Scientific SilTite Ferrule, which forms a strong, permanent, airtight seal around the capillary column.

• SilTite metal ferrules and nuts are made from the same material and have the same thermal
expansion coefficient
• Base of the ferrule is flat and forms a perfect seal with the MS interface
• The ferrules temperature tolerance is well above the limit of the injector, MS interface or GC oven
• Unlike other ferrules, do not need re-tightening after installation
Image(s) are representative of the product group and not necessarily the individual product.

Type: Nut
Style: SilTite
For Use With: Thermo Scientific Instruments

Type: Ferrules
Style: SilTite
For Use With: Thermo Scientific Instruments
I.D. (mm): 0.1 to 0.25

Type: Ferrules
Style: SilTite
For Use With: Thermo Scientific Instruments
I.D. (mm): 0.32

Type: Ferrules
Style: SilTite
For Use With: Thermo Scientific Instruments
I.D. (mm): 0.53

Type: Ferrules
Style: Agilent
For Use With: Agilent 5890, 6890 and 6850, Varian, Shimadzu Jet Separator GC/MS Interface and 2010, and Perkin-Elmer GC/MS Interface
I.D. (mm): 0.53

Type: Ferrules
Style: SilTite
For Use With: Agilent 5890, 6890 and 6850, Varian, Shimadzu, PerkinElmer Instruments
I.D. (mm): 01. to 0.25

Type: Ferrules
Style: SilTite
For Use With: Agilent 5890, 6890 and 6850, Varian, Shimadzu, PerkinElmer Jet Separator GC/MS Interface and 2010, and Perkin-Elmer GC/MS Interface
I.D. (mm): 0.32

Type: Nut
Style: Agilent
For Use With: Agilent 5890, 6890, 6850 Split/Splitless Injectors

Type: Nut
Style: Agilent
For Use With: Agilent 5890, 6890, 6850, Shimadzu Jet Separator GC/MS Interface and 2010, and Perkin-Elmer GC/MS Interface