Thermo Scientific* Acclaim* Carbonyl C18 LC Columns

Use the Thermo Scientific Acclaim Carbonyl C18 LC Columns for superior resolution and high-throughput separation of dinitrophenylhydrazine (DNPH) derivatives of aldehydes and ketones. This silica-based, reversed-phase column provides ideal selectivity and baseline resolution of DNPH derivatives regulated by various official methods, including U.S. EPA 554, EPA 8315, EPA 1667, EPA TO-11, and CARB 1004.

Superior Performance for Challenging Aldehyde and Ketone Analysis
• High efficiency separations for excellent UHPLC performance
• Rugged columns with good lot-to-lot reproducibility
• Proven robust methods

Wide Variety of Column Dimensions to Meet Your Analysis Needs
• 2.2, 3 and 5 µm particle sizes; smaller particle sizes provide high peak efficiency for fast analysis
• 2.1, 3.0 and 4.6 mm diameters; small diameter columns (2.1 and 3.0 mm) consume less solvents and produce less chemical waste
• 100, 150 and 250 mm lengths

For high-throughput applications, use the 2.1 x 100 mm column format combined with high linear velocity. When high resolution power is needed, use a longer column (2.1 x 150 mm) at an optimal linear velocity to achieve even better resolution.

About the Family of Acclaim Specialty HPLC Columns
Acclaim specialty columns have been developed, manufactured and tested to meet the separation needs of specific applications. These columns are based on novel and unique chemistries and provide superior resolution with ease of use.

• Use-tested to guarantee consistent separations
• Ideal selectivity for separating specific target analytes
• Excellent peak shapes
• Performance tested to ensure high quality and reliability for specific chromatographic separations
Image(s) are representative of the product group and not necessarily the individual product.

Flow Rate (mL/min.): 0.25 to 0.75
Max Pressure: 600 bar
Particle Size (um): 2.2
Length (mm): 100
Diameter (mm): 2.1

Flow Rate (mL/min.): 0.25 to 0.75
Max Pressure: 800 bar
Particle Size (um): 2.2
Length (mm): 150
Diameter (mm): 2.1

Flow Rate (mL/min.): 0.4 to 1.4
Max Pressure: 550 bar
Particle Size (um): 2.2
Length (mm): 100
Diameter (mm): 3

Max Pressure: 400 bar
Particle Size (um): 5
Length (mm): 250
Diameter (mm): 4.6

Max Pressure: 600 bar
Particle Size (um): 3
Length (mm): 150
Diameter (mm): 2.1

Max Pressure: 600 bar
Particle Size (um): 3
Length (mm): 150
Diameter (mm): 3

Max Pressure: 800 bar
Particle Size (um): 3
Length (mm): 250
Diameter (mm): 3