CAPILLARY GC COLUMNS

Globe Scientifics capillary tube sealing tray contains a unique wax compound that quickly forms a leak-tight seal. Non-toxic, non-drying and non-hardening, the sealant is formulated to withstand centrifugation. There is no need for plastic caps or heat...

Glass capillary tubes are designed for both safe blood collection as well as accurate micro-hematocrit determinations. Precision molded, they provide excellent sample retention during centrifugation. In addition, the tubes fill rapidly without affecting...

Precalibrated glass capillary tubes are marked with a black calibration line at 60 mm from one end. The calibration line establishes a uniform blood column length. Treated with ammonium heparin, these tubes are designed for both safe blood collection as...

Globe Scientifics plastic micro hematocrit capillary tubes are completely unbreakable. They eliminate the risk of injury and contamination associated with glass tubes due to breakage. Plastic micro hematocrit capillary tubes comply with FDA, NIOSH, CDC...

Primary Application:The 100% Dimethylpolysiloxane is highly versatile phase that is extremely rugged, exhibiting long column lifetime, low bleed, and high maximum operating temperaturesImage(s) are representative of the product group and not...

Elite-1301 (6% Cyanopropylphenyl) Dimethyl Polysiloxane series for AutoSystem.Elite-1301 ColumnsThe Elite-1301 Columns are fused silica GC capillary columns coated with a 6% Cyanopropylphenyl and 94% Dimethyl Polysiloxane stationary phase...

Elite-17 (50% Phenyl) Methylpolysiloxane Series for Autosystem.Image(s) are representative of the product group and not necessarily the individual product.Inner Diameter (mm): 0.05Length (m): 10Film Thickness (µm): 0.10Temperature Limits ( DEG...

Elite-1701 (14% Cyanopropylphenyl) Methylpolysiloxane Series for AutoSystem.Image(s) are representative of the product group and not necessarily the individual product.Inner Diameter (mm): 0.05Length (m): 10Film Thickness (µm): 0.05Temperature...

Elite-17ht (high temperature, 50% Phenyl) Methylpolysiloxane Series for AutoSystem.• Film Thickness: 0.15 µm• Temperature Limits: 40 to 300/320°CImage(s) are representative of the product group and not necessarily the individual...

Elite-17 ms (50% Phenyl) Methylpolysiloxane, (low bleed) Series for AutoSystem.Image(s) are representative of the product group and not necessarily the individual product.Inner Diameter (mm): 0.18Length (m): 20Film Thickness (µm): 0...

Elite-1ht (high temperature) Dimethylpolysiloxane Series. • Film thickness: 0.10 µm• Temperature limits: -60 to 380°CImage(s) are representative of the product group and not necessarily the individual product.Inner Diameter (mm): 0...

Elite-200 Trifluoropropylmethyl Polysiloxane Series.Elite-200 is considered to be one of the best capillary columns in the market today, solving many difficult separation problems not possible on any other bonded stationary phase. Due to the...

Elite-225 (50% Cyanopropylphenyl) Phenylmethylpolysiloxane Series for AutoSystem.Image(s) are representative of the product group and not necessarily the individual product.Inner Diameter (mm): 0.10Length (m): 20Film Thickness (µm): 0...

Elite-35 (35% Diphenyl) Dimethylpolysiloxane Series for AutoSystem.Image(s) are representative of the product group and not necessarily the individual product.Inner Diameter (mm): 0.25Length (m): 30Film Thickness (µm): 0.15Temperature Limits (...

Elite-35ms (35% Phenyl) Methylpolysiloxane Series for AutoSystem.Elite-35 is 35% phenyl (methylpoysiloxane), whereas Elite-35ms is a low bleed specialty stationary phase (not hand-selected low bleed population of Elite-35 columns). The Elite-35ms...

The nonpolar Elite-5 columns are fused silica capillary columns coated with a 5% diphenyl and 95% dimethylpolysiloxane stationary phase. The small percentage of phenyl groups impart an aromatic nature to this phase.The Elite-5 column is the most...

Elite-502.2 Series, specialty phase for analysis of volatiles (EPA 502.2).Image(s) are representative of the product group and not necessarily the individual product.Inner Diameter (mm): 0.25Length (m): 60Film Thickness (µm): 1.40Temperature Limits...

The tubing surface of the Elite-5Amine is chemically altered to reduce tailing of basic compounds. Thorough testing on each column ensures that every column exceeds the requirements for analyzing ppm levels of amines, without priming. The temperature...

Elite-5ht (high temperature, 5% Diphenyl) Dimethylpolysiloxane Series. • Film Thickness: 0.10 µm• Temperature Limits: -60 to 400°CImage(s) are representative of the product group and not necessarily the individual product.Inner...

Elite-5ms (5% Diphenyl) Dimethylpolysiloxane Series.Image(s) are representative of the product group and not necessarily the individual product.Inner Diameter (mm): 0.18Length (m): 20Film Thickness (µm): 0.18Temperature Limits ( DEG C): -60 to...

Elite-608 Series, specialty phase for semi-volatile pesticides (EPA 608).Image(s) are representative of the product group and not necessarily the individual product.Inner Diameter (mm): 0.32Length (m): 30Film Thickness (µm): 0.50Temperature Limits (...

Elite-624 Series, specialty phase for analysis of volatiles (EPA 624). Temperature Limits: -20 to 240°C.Image(s) are representative of the product group and not necessarily the individual product.Inner Diameter (mm): 0.20Length (m): 25Film Thickness...

Elite-Alumina PLOT Phase Capillary Columns for analysis of light hydrocarbons. Elite-Alumina/KCl PLOT Phase Capillary Columns have a lower polarity than the Elite-Alumina.Image(s) are representative of the product group and not necessarily the individual...

Elite-BAC (Blood Alcohol Analysis) Columns for GC and High-Speed Headspace Gas Chromatography.By using the Elite-BAC Columns, standard separations and automated separations of less than 1.5 minutes can be accomplished. Sample concentrations range from 0...

Elite-Betacyde Betacyclodextrin for chiral separations.Image(s) are representative of the product group and not necessarily the individual product.Inner Diameter (mm): 0.25Length (m): 30Film Thickness (µm): 0.25Temperature Limits ( DEG C): 40 to 230

Elite-CLPesticides is specially designed to overcome the coelutions and analyte breakdown typically encountered in chlorinated pesticide analyses for EPA methods 8081, 608 and CLP. Column bleed measured by ECD is extremely low at temperatures greater...

Elite-FFAP, Nitroterephthalic Acid Modified Polyethylene Glycol (Bonded) Series for AutoSystem.Image(s) are representative of the product group and not necessarily the individual product.Inner Diameter (mm): 0.25Length (m): 30Film Thickness (µm): 0...

Using the Elite-Guard or the Elite-Siltek Guard Column lengthens the life of the capillary column and improves the analyte focusing. The 5 m length of deactivated uncoated fused silica is connected to the inlet end of the capillary column and traps...

Elite-Molesieve PLOT Phase Series for analysis of permanent gases.Image(s) are representative of the product group and not necessarily the individual product.Inner Diameter (mm): 0.53Length (m): 30Temperature Limits ( DEG C): -60 to 300

Elite-MTBE (low polarity) Stationary Phase Series for AutoSystem.• Temperature Limits: 10 to 250°CImage(s) are representative of the product group and not necessarily the individual product.Inner Diameter (mm): 0.45Length (m): 30Film Thickness...

The Elite-MWAX columns are Silcosteel GC capillary columns coated with a bonded polyethylene glycol stationary phase. These columns are polar.Polyethylene Glycol PhaseThe Elite-MWAX columns are the most versatile and thermally stable polar phases. The...

Elite-PONA Dimethylpolysiloxane Series processed for detailed analysis of petroleum naphtha.• Temperature Limits -60 to 300/320°CImage(s) are representative of the product group and not necessarily the individual product.Inner Diameter (mm): 0...

Elite-Q PLOT Phase Series for analysis of light gases and hydrocarbons for AutoSystem.Image(s) are representative of the product group and not necessarily the individual product.Inner Diameter (mm): 0.32Length (m): 30Temperature Limits ( DEG C): -60 to...

Elite-RX Series for analysis of drugs of abuse.Image(s) are representative of the product group and not necessarily the individual product.Elite-1-RXInner Diameter (mm): 0.20Length (m): 12Film Thickness (µm): 0.33Temperature Limits ( DEG C): -60 to...

Elite-SimDist Dimethylpolysiloxane Processed Series for Simulated Distillation.• Temperature Limits: -60 to 360°C.Image(s) are representative of the product group and not necessarily the individual product.Inner Diameter (mm): 0.45†Length...

Elite-TPH Specialty Phase Series for analysis of total petroleum hydrocarbons.Image(s) are representative of the product group and not necessarily the individual product.Inner Diameter (mm): 0.32Length (m): 30Film Thickness (µm): 0.25Temperature...

Specifically designed for the analysis of volatile organic pollutants by GC/MS, Elite-VMS offers an overall faster analysis time with lower bleed and excellent separation qualities. This is a highly stable polymer designed to provide outstanding analysis...

Elite-Volatiles Specialty Phase Series for analysis of volatile organic compounds.• Temperature limits -20°C to 240°CImage(s) are representative of the product group and not necessarily the individual product.Inner Diameter (mm): 0.25Length...

The Elite-WAX columns are fused silica GC capillary columns coated with a bonded Polyethylene Glycol stationary phase. These columns are polar.Polyethylene Glycol PhaseThe Elite-WAX columns are the most versatile and thermally stable polar phases. The...

Elite-WAX ETR (Extended Temperature Range) Polyethylene Glycol for AutoSystem.The Elite-WAX columns are fused silica GC capillary columns coated with a bonded Polyethylene Glycol stationary phase. These columns are polar.Polyethylene Glycol PhaseThe...