INCUBATOR ACCESSORIES

Increase overall capacity of your incubator. Perforated holes allow air passage through bottom of rack. Made from 1.6 mm (1/16 in.) thick, white epoxy-coated steel.Image(s) are representative of the product group and not necessarily the individual...

Maximize storage for petri dishes and cell culture flasks in incubators, cold rooms or on the bench. Five racks can be stacked in one square foot for up to 20 levels of storage. Perforated trays slide easily within the rack and allow air and gas to flow...

These disposable, activated charcoal cartridges efficiently absorb the S-35 radioactive component released from S-35 labeled amino acids. Capturing the released volatile radioactivity lessens the chance of breathing the volatile component and reduces...

CO2 Gas Regulator to regulate pressure from gas tank for myTemp Mini CO2 Digital Incubator and Incu-Shaker Mini CO2 shaking incubator.Image(s) are representative of the product group and not necessarily the individual product.

Aluminum constructed rod with black vinyl coated handle. Non-detachable nickel-plated brass chuck holds 0.25-0.63mm (0.010-0.025) wire or foil. Diameter of handle: 6.35mm (1/4). Length: 25.4cm (10).Image(s) are representative of the product group and not...

MicroCooler II™Applications• Ideal for maintaining the 14 DEG C used in ligation reactions or 17 DEG C for storing oocytes.• Maintaining samples at near ice bucket temperatures, without the mess of melted ice or contamination•...

Pre-drilled Shaking Flask Clamp Platform for LSE 71 L Shaking IncubatorImage(s) are representative of the product group and not necessarily the individual product.Accessories

Universal Platform 30 x 30 cm for LSE Benchtop Shaking IncubatorImage(s) are representative of the product group and not necessarily the individual product.Accessories

Pre-drilled Flask Clamp Platform for LSE 49 L Shaking IncubatorImage(s) are representative of the product group and not necessarily the individual product.Accessories

Accessories for 211DS Digital Shaking Incubator (Catalog No. 481-67580).Image(s) are representative of the product group and not necessarily the individual product.AccessoriesSize: 13.5 x 8.5 in. (33.6 x 21.6 cm)Size: 30 x 30 cmSize: 30.5 x 30.5 cmSize:...

Shelves and platforms for 311DS Digital Shaking Incubator (Catalog No. 361-10004).Image(s) are representative of the product group and not necessarily the individual product.With Flask Clamps: 1 Rack for 50 mL tubesWith Flask Clamps: 4 x 2LWith Flask...

Additional Shelving for Model 311D (Catalog No. 481-67607) and 611D (Catalog No. 461-10019) Digital Incubators. Two shelves are supplied standard with the 311D and 611D digital incubators.Image(s) are representative of the product group and not...

Eight interchangeable aluminum blocks accommodate PCR plates and tubes ranging from 0.2 mL to 15 mm.Image(s) are representative of the product group and not necessarily the individual product.

Sticky Mat for use with Benchtop Shaking Incubator (Cat. No. 361-10169) and Rocker 35 E-Z (Cat. No. 361-10262 and 361-10265).Image(s) are representative of the product group and not necessarily the individual product.Size (mm): 150 x 150 x 3

Metal clip plate to accommodate up to four 100 mL Volumetric Flasks. This can be attached to the Magnetic Platform for use with the Roto-Shake Genie, Rotator Genie, Enviro-Genie or Incubator-Genie.Image(s) are representative of the product group and not...

Metal clip plates to accommodate up to 12 tubes with a diameter of 10 to 13 mm. A maximum of 8 clip plates, 4 per side, may be attached to the Magnetic Platform for use with the Roto-Shake Genie, Enviro-Genie, or Incubator Genie. A maximum of 12 clip...

Metal clip plates to accommodate up to 3 tubes with a diameter of 28 to 30 mm. A maximum of 8 clip plates, 4 per side, may be attached to the Magnetic Platform for use with the Roto-Shake Genie, Enviro-Genie or Incubator-Genie. A maximum of 12 clip...

Metal clip plates to accommodate up to 6 tubes with a diameter of 15 to 17 mm. A maximum of 8 clip plates, 4 per side, may be attached to the Magnetic Platform for use with the Roto-Shake Genie, Enviro-Genie or Incubator-Genie. A maximum of 12 clip...

Two stainless steel Trays and 24 magnetic Bag Mounting Strips used to attach sealed bags to the Magnetic Platform for use with the Roto-Shake Genie, Enviro-Genie, or Incubator-Genie for increased bag capacity.Image(s) are representative of the product...

Pack of 16 stainless steel Bag Mounting Strips used to attach to the Magnetic Platform for use with the Roto-Shake Genie, Rotator Genie, Enviro-Genie or Incubator-Genie. Four Bag Mounting Strips are included in the Roto-Shake Genie, Enviro-Genie, and the...

Plastic box with hinged lid holds up to (100) 1.5 mL or 2.0 mL microtubes. A maximum of 4 boxes, 2 per side, can be attached to the Magnetic Platform for use with the Roto-Shake Genie, Enviro-Genie or Incubator-Genie. A maximum of 8 boxes, 4 per side can...

This kit contains one fan that attaches to the back panel of the Enviro-Genie (Cat. No. 360-10014).Image(s) are representative of the product group and not necessarily the individual product.

This is the LCD Display Board that attaches to the front panel of the Enviro-Genie (Cat. No. 360-10014). If your Enviro-Genie has LEDs you will need to order the LED Display Board.Image(s) are representative of the product group and not necessarily the...

This heating element kit is used on all voltages of the Incubator-Genie (Cat. No. 360-77639). The kit includes two Heating Elements.Image(s) are representative of the product group and not necessarily the individual product.

This is the LED Display Board that attaches to the front panel of the Incubator-Genie (Cat. No. 360-77639).Image(s) are representative of the product group and not necessarily the individual product.

This is the LCD Display Keypad that attaches to the front panel of the Enviro-Genie (Cat. No. 360-10014). Thread the cable through the slot in sheet metal. Peel and Stick Adhesive back adheres keypad easily to sheet metal. Then connect the ribbon cable...

This is the LED Display Keypad that attaches to the front panel of the Incubator-Genie (Cat. No. 360-77639). Thread the cable through the slot in sheet metal. Peel and Stick Adhesive back adheres keypad easily to sheet metal. Then connect the ribbon...

Knob on the right of the unit, used to secure the Magnetic Platform Assembly for the Enviro-Genie (Cat. No. 360-10014) and Incubator-Genie (Cat. No. 360-77639).Image(s) are representative of the product group and not necessarily the individual product.

Complete Motor Assembly, with gears and drive shaft. This Motor Assembly is used on all voltages of the Incubator-Genie (Cat. No. 360-77639).Image(s) are representative of the product group and not necessarily the individual product.

The LCD Power Distribution Board is used on all voltages of the Enviro-Genie (Cat. No. 360-10014). If your Enviro-Genie has LEDs you will need to order the LED Power Distribution Board.Image(s) are representative of the product group and not necessarily...

This power supply is used on all voltages of the Incubator-Genie (Cat. No. 360-77639).Image(s) are representative of the product group and not necessarily the individual product.

This is the Power Switch for the 100V and 120V Enviro-Genie (Cat. No. 360-10014) and Incubator-Genie (Cat. No. 360-77639).Image(s) are representative of the product group and not necessarily the individual product.

This is the main chamber Temperature Sensor that sits behind the inner fan in the Enviro-Genie (Catalog No. 360-10191) and Incubator-Genie (Cat. No. 360-77639).Image(s) are representative of the product group and not necessarily the individual product.

This kit contains five Thermo Electric Coolers that are prewired in series for the Enviro-Genie (Cat. No. 360-10014). Kit also contains a small amount of Thermo Grease. Comes with instructions for installation.Image(s) are representative of the product...

Serial Cable may be used to connect the Enviro-Genie to a computer via a serial port for data capture or programming. It is a standard 9-pin, female to female straight through serial cable.Image(s) are representative of the product group and not...

Stackable Wire Rack may be used in the Enviro-Genie and the Incubator-Genie to increase shelf space for use as a temperature controlled chamber. This is included in the Enviro-Genie and the Incubator-Genie. Two wire racks will fit inside the chamber to...

Pack of 2 clip plates with two elastic bands each for use with odd-shaped sample vessels. This can be attached to the Magnetic Platform for use with the Roto-Shake Genie, Rotator Genie, Enviro-Genie or Incubator-Genie.Image(s) are representative of the...

Accessories for Thermo Scientific Heratherm Microbiological Incubator.Image(s) are representative of the product group and not necessarily the individual product.

• Gaskets made of silicone-free Viton® material for special applications• For all Heratherm modelsImage(s) are representative of the product group and not necessarily the individual product.For Unit Capacity (L): 400For Unit Capacity...

• Stainless steel perforated shelves• Includes two shelf supportsImage(s) are representative of the product group and not necessarily the individual product.For: IMH18Dimensions: 7.1 x 11.4 in.For: IGS60Dimensions: 12.95 x 14.8 in.For:...