TEMPERATURE PROBES

Type-K (NiCr/NiAl) probe provides fast, accurate readings of air/gases, semi-solids, and liquids. Can be used in temperatures as low as -170°C. Stainless steel probe with ABS plastic handle and 8 ft. expandable cable.Specifications:•...

Replacement platinum RTD stainless steel probe for Traceable Platinum RTD Thermometer (Cat. No. 350-37096). Temperature range of -58 to 752 DEG F (-50 to 400 DEG C). Probe measures 6 in. long, 0.13 in. diameter with a 40 in. cable.Image(s) are...

Type-K (NiCr/NiAl) probe provides fast, accurate readings of air/gases, semi-solids, liquids. Stainless steel probe with an ABS plastic handle makes temperature measurement easy.Specifications:• Temperature range: -50 to 700°C•...

Stainless steel probe with ABS handle, is for use with Type-K thermometers. Probe provides fast, accurate readings of air/gases, semi-solids, and liquids. Specifications:• Temperature range: -73 to 760°C• Probe length: 5 in. • Tip...

Designed to give the same accuracy and benefits of a RTD Probe in a compact economical design. The General Purpose RTD Probe is designed for most common and liquid immersion applications. The 304 stainless steel sheath (tip casing) provides durability,...

Designed to give the same accuracy and benefits of a RTD Probe in a compact economical design. The RTD Surface Probe has flat sensor wires that are encased in hardened MgO ceramic insulation to ensure positive contact even under vibrating circumstances...

Temperature Sensors for or use with RET control-visc / C safety control and RET control/t. Dual sensors have 2 separate steel sensors for heat transfer fluid and medium. Stainless steel sensors are made of AISI 316 Ti. Glass-coated temperature sensors...

Temperature Sensors for or use with RET control-visc / C safety control and RET control/t. Stainless steel sensors are made of AISI 316 Ti. Glass-coated temperature sensors are made of borosilicate glass 3.3 and are for work with aggressive and corrosive...

24 Gauge PTFE FEP-Insulated Flexible Wire Thermocouple Probe, Type K. Flexible Wire Probes include a straight insulated cable without a handle. These probes can be easily bent and mounted on walls or around corners. PTFE-coated probes for use with acids...

Food Service Thermocouple Probe with Hypodermic-Tip• 4 probe tip with 316SS sheath and handle, 5-ft straight armored PVC cable, mini-connector.• Junction: grounded. • 10 second Response Time.• Designed especially for food service...

Stainless Steel Food Service Thermocouple Probes. These thermocouple probes were designed to measure any general-purpose or liquid immersion application. All thermocouple probes include a 5-ft. PVC coiled cord with strain relief that protects from...

Extra Long Stainless Steel General Purpose Thermocouple Probes• 10 probe length (0.188 dia) with 316SS sheath, 5.5 polypropylene handle, 5-ft cable with strain relief, mini-connector.• Junction: ungrounded. • 25 second Response Time...

Heavy-Duty Extra-Long Penetration Thermocouple Probe, Type T• Range: -418 to 752 DEG F (-250 to 400 DEG C)• 36 probe length (0.25 dia) with 316SS sheath, polypropylene handle, 5ft coiled cord with strain relief, mini-connector.• 15...

Small-Diameter Penetration Thermocouple Probes. Penetration Probes offer a pointed tip style for penetration into hard and semi-solid materials. Sturdy stainless steel tip casing prevents tip from bending when inserting. Probes include a 5-ft. PVC coiled...

Penetration Probes offer a pointed tip style for penetration into hard and semi-solid materials. Sturdy stainless steel tip casing prevents tip from bending when inserting.Probes include a 5-ft.. PVC coiled cord with strain relief that protects from...

The Standard Surface Probes feature ceramic tips to ensure excellent thermal contact. Surface probes offer dual spring tips to provide positive contact with flat or slightly irregular surfaces. Includes a 5 ft. PVC coiled cord with strain relief that...

• 4.5 inch probe with 316SS sheath, 5 inch nylon handle • 5 ft. PVC coiled cord with strain relief • Junction: grounded, 15 sec (liquids) response time • Use with any Oakton Digi-Sense and Acorn thermocouple thermometer •...

• 12 in. probe tip with 316SS sheath, 5 in. nylon handle, 5 ft. PVC coiled cord with strain relief• Stainless steel sheaths provide good chemical resistance and fast thermal response • These thermocouple probes were designed to measure...

Ambient Type J Beaded Wire Probe for fast response in air and gas in difficult to access areas. Type J has a more restricted range than type K, but higher sensitivity of about 50 µV/°C. Type J wire color standard is white (+) and red (-). ...

Type K is the most common general purpose thermocouple with a sensitivity of approximately 41 µV/°C. Type K wire color standard is yellow (+) and red (-).Specifications:• Temperature range: -50 to 900°C (-58 to 1652°F)•...

Type K is the most common general purpose thermocouple with a sensitivity of approximately 41 µV/°C. Type K wire color standard is yellow (+) and red (-).Specifications:• Temperature range: -50 to 400°C (-58 to 752°F)• Handle...

Type J has a more restricted range than type K, but higher sensitivity of about 50 µV/°C. Type J wire color standard is white (+) and red (-). Specifications:• Temperature range: -50 to 400°C (-58 to 752°F)• Handle length:...

Type J has a more restricted range than type K, but higher sensitivity of about 50 µV/°C. Type J wire color standard is white (+) and red (-). Specifications:• Temperature range: -50 to 400°C (-58 to 752°F)• Handle length:...

Type K is the most common general purpose thermocouple with a sensitivity of approximately 41 µV/°C. Type K wire color standard is yellow (+) and red (-).Specifications:• Temperature range: -50 to 400°C (-58 to 752°F)• Handle...

Type K is the most common general purpose thermocouple with a sensitivity of approximately 41 µV/°C. Type K wire color standard is yellow (+) and red (-).Specifications:• Temperature range: -30 to 480°C (-22 to 896°F)• Handle...

Type K Ambient Thermometer Probe has a fast response in air and gas. Sheath protected element. Type K is the most common general purpose thermocouple with a sensitivity of approximately 41 µV/°C. Type K wire color standard is yellow (+) and red...

Magnetic probe for use on stationary metal surfaces. Type K is the most common general purpose thermocouple with a sensitivity of approximately 41 µV/°C. Type K wire color standard is yellow (+) and red (-).Specifications:• Temperature...

Type K is the most common general purpose thermocouple with a sensitivity of approximately 41 µV/°C. Type K wire color standard is yellow (+) and red (-).Specifications:• Temperature range: -50 to 400°C (-58 to 752°F)• Handle...

General Purpose Pt100 Probes, +/-0.20 DEG C, 4 Wire platinum - 1 Meter Cable PVCImage(s) are representative of the product group and not necessarily the individual product.Temperature Range: -30 to 100 DEG CLength x Diameter (mm): 230 x 12Temperature...

High Precision Pt100 Probes, +/-0.03 DEG C (-30 to +200 DEG C) - 1 Meter Cable PVCHigh Precision, Metrology Grade, NIST Traceable Instruments. These high accuracy thermometers are used when temperature measurement are critical and/or when online...

Thermoco Precision Handheld K-Type Thermocouple ProbesImage(s) are representative of the product group and not necessarily the individual product.Style: Fiberglass InsulatedStyle: ImmersionStyle: Teflon Insulated

• Two-channel thermometer • Front panel offsets for temperature adjustment • Rubberized case, wrist strap, and built-in stand Large LCD shows temperatures of probe 1, probe 2, or the difference (delta) of the two probes. Readout in...