CONDENSERS

Corning PYREX 300 mm West Condenser, Drip Tip, with 24/40 Standard Taper Outer and Inner JointsThis PYREX West condenser is designed with a 300 mm long heavy-wall outer jacket to provide a sturdy, long-lasting unit, while the inner tube has a thinner...

A widely used condenser with greater surface area than the corresponding Liebig type. With the outer TS joint at the top and the inner TS joint at the bottom with a drip tip. Suitable for use in vacuum distillations. Tubulations have an OD of...

A simple condenser, of relatively low efficiency, often used to regulate refluxing by adjusting the flow of air or water through it (dephlegmation). The tubulation O.D. is approximately 10 mmImage(s) are representative of the product group and not...

Condensers have a high surface area per unit length of jacket. Primarily used in vacuum distillations. Supplied with outer TS joint at top or with inner and outer joints. All units come with a drip tip. Tubulation OD is approximately 10 mm.Image(s) are...

General purpose condenser that can be used for distillation and extraction. Suitable for use in vacuum distillations. With the outer TS joint at the top and the inner TS joint at the bottom with a drip tip. Tubulation OD is approximately 10 mm.Image(s)...

These PYREX general purpose condensers have a 24/40 TS inner joint at the bottom with a drip tip. They are available with either 400 mm or 500 mm long jackets. Although the condensing area per unit length of the jacket is low, the large capacity water...

A simple air condenser, useful for condensation of materials with boiling points above 150°C., with an inner TS 24/40 drip tip. Low actinic glass protects light sensitive materials.Image(s) are representative of the product group and not necessarily...

This simple PYREX micro column condenser is for use on small assemblies. The tubulation O.D. is 10 mm. This condenser has 24/40 inner and outer Standard Taper joints and is a replacement part for organic chemistry kit (Cat. No. 988-26356).Image(s) are...

This condenser is designed with a heavy-wall outer jacket to provide a sturdy, long-lasting unit, while the inner tube has a thinner wall for efficient heat transfer. The tubulations are on the same side to reduce breakage and the adapter ends are all...

Designed with a 190 mm long jacket and is available with either 14/20 or 19/22 TS joints. The tubulations are on the same side to reduce breakage and the adapter ends are all tooled for No. 3 rubber stopper fit. The tubulation OD is approximately 10 mm...

• West Medium Length Condenser• 19/22 Standard Taper joints• Jacket length 200 mm• Approx. condensing area 66 cm• Fits tubing ID 1/4 in.• Approx. overall height 285 mmImage(s) are representative of the product group...

The Slow-Dry® concentrator tube reduces the risk of concentrating a sample to dryness.• Unique tip features an insulated air space around the constricted end of the tube, shielding the sample and providing a protective temperature...

Allihn Condenser, 260 mm jacket, 45/50 Joint, Fits tubing ID 3/8 in., Overall height 365 mmImage(s) are representative of the product group and not necessarily the individual product.

Allihn reflux condenser with a straight outlet tube at top and water cooled TS inner drip joint at bottom. For use in many refluxing operations including Soxhlet extractions.Image(s) are representative of the product group and not necessarily the...

Reflux condenser has efficient non-flooding design.• Reflux condenser with water-cooled inner coil sealed to top and bottom hose connectors• Fits tubing I.D.: 3/8 in.• Full length 24/40 joints• Top joint: Standard Taper•...

Features a TS outer joint at top and a TS inner drip joint at the bottom. No. 2 hose connection.Image(s) are representative of the product group and not necessarily the individual product.Jacket Length (mm): 200TS Joint: 24/40Jacket Length (mm): 250TS...

Condenser with water-cooled outer jacket to increase condensation capabilities.• Cold finger length: 225 mm• Approximate condensing area: 474 cm2• Fits tubing I.D.: 3/8 in.• Standard Taper Joints: 24/40• Reflux condenser...

These graham condensers are designed for use in distillation applications. Constructed of borosilicate glass, this condenser has a coiled inner tube to provide additional surface area for highly efficient cooling. Socket is 24/40 with a screw thread...

Liebig condensers are used to cool and condense hot vapor as part of a distilling apparatus. This condenser has a straight inner tube that the condensing vapor passes through, and a larger outer jacket that cooling water passes through. Socket is 24/40...