CLAMPS

Features a 2-prong die-cast clamp attached to a chrome-plated steel rod. Jaws are lined with cork. Overall length is 8 in.Image(s) are representative of the product group and not necessarily the individual product.

These 3-prong extension clamps are constructed of pressure die-cast zinc alloy and are chrome-plated. Clamps open to about 3 in. They have a recommended maximum grip size of about 2.25 in., and feature double keyed spring-type adjustment screws. Boss...

Spring-action opening clamp with flat wing-head tightening screw. Stainless steel jaws are covered with rubber tubing and have an opening range of 0 to 25 mm (1 in.). Overall clamp length is 22 cm (9 in.)Image(s) are representative of the product group...

Neatly holds 6.5 mm (1/4 in.) diameter or smaller computer wires and tubing making identification and service easier. • Easily organize wire and tubing• Nonconductive plastic clips mount on any flat surface with pressure sensitive adhesive...

Strong, open-jaw type nylon tubing clamp accepts any tubing up to 6.4mm (1/4) O.D. Angled jaws prevent tube from slipping out. 12 per bag, 12 bags per case.Image(s) are representative of the product group and not necessarily the individual product...

Screw Tubing Clamps for precise control. Offers on/off and fine control so accurate that it replaces stopcocks in many applications. Can be installed without disconnecting tubing or interrupting operation. Molded from Acetal plastic, the clamp is...

Tubing Clamps with serrated jaws. Strong acetal plastic clamp provides secure closure on tubing with a wall of 0.82 mm (132 in.) or thinner. Fits tubing up to 1.3 cm (1/2 in.) O.D. Slides over tubing at any point for easy installation and may be left...

Spring Tubing Clamps for squeeze control of all flexible tubing. Positive-action, self-closing clamp opens by squeezing the handles together. Made of chemical and stain-resistant Acetal plastic and stainless steel.Image(s) are representative of the...

Non-corroding clamps hold burettes firmly in place. Soft rubber pads hold burette without scratching. Clamp fits standard 12.5 mm (1/2 in.) support rod and includes an adapter to fit to narrower 9.5 mm (3/8 in.) rod (support rod not included). Made of...

Forged steel handle with jaws of stamped steel coated in plastisol.Image(s) are representative of the product group and not necessarily the individual product.Jaw Opening (in.): 3/8 to 13/8Length (in.): 8Jaw Opening (in.): 11/16 to 2Length (in.): 9

Hose/Tubing Clamops for use with all types of rubber and plastic tubing. Made of chemical/corrosion-resistant, non-conducting nylon. One-piece, reusable clamp squeezes shut for a leak proof seal pressing the side releases the clamp. May be chemically or...

2 inch long right angle black anodized aluminum Boss Head clamp that will accept up to 7/16 in. diameter support rods. It is designed to be used with the Corning Temperature probe support clamp (sold separately, Cat. No. 148-16897).Image(s) are...

For flexible tubing. Steel wire, nickel-plated for tubing up to 10 mm (3/8 in.) diameter tubing.Image(s) are representative of the product group and not necessarily the individual product.

This unique open/close, single position tubing clamp design allows for positive on/off flow control. The clamp design features easy tube insertion for both manual and automatic operations. One position tubing clamp is molded of polypropylene suitable for...

These spring loaded polypropylene clamps allow a clear view of the graduations over the entire length of the buret. The arms are fitted with rubber grips to prevent slipping and the central boss features a conical compression piece which provides a firm...

Similar in design to the Screw Compressor Clamps except that the compression adjustment screw has a 1 in. (25mm) diameter serrated head for greater leverage. The clamps are constructed from brass and plated for corrosion resistance.Image(s) are...

Spring-steel clip snaps onto rim of a beaker, flask, or other vesselImage(s) are representative of the product group and not necessarily the individual product.

Hook Collar clamps for suspending pulleys, balances, etc. from support rods or cross members.Image(s) are representative of the product group and not necessarily the individual product.For Rod Diameter (in.): 1/2For Rod Diameter (in.): 3/4

Extention Clamp; 2-Prong; 10 in. Plastisol-coated Extract Clamp; Stainless Steel Compression Spring 25cm long; Holds Objects with 7.6cm dia. max; Plastic-covered jaws; Nonrusting.Image(s) are representative of the product group and not necessarily the...

Adjustable Band Clamps provide a unique and efficient clamping mechanism for objects of any shape and size. The same clamp can be used to handle a gallon container or fit snugly to hold a small thermometer, reducing the need to stock numerous clamp sizes...

Steel, zinc-plated round burette clamps. Also available with Plastisol-coated jaws.Image(s) are representative of the product group and not necessarily the individual product.

Clamp has 1 V-jaw and 1 flat jaw to handle small objects. Steel, zinc-plated w/Plastisol-coated jaws. 3/8 to 1-3/8 in. (10 to 35mm) opening, 6-3/8 in. (162mm) length.Image(s) are representative of the product group and not necessarily the individual...

Plastisol-coated JawsImage(s) are representative of the product group and not necessarily the individual product.

For use with extension rods and rings.Image(s) are representative of the product group and not necessarily the individual product.

Plastisol-coated JawsImage(s) are representative of the product group and not necessarily the individual product.

This clamp can be instantly detached from vertical surfaces such as heaters. It is constructed of aluminum and incorporates a 5/16-18 by 1-1/4 steel thumbscrew. The clamp is 1-3/16 wide by 2-15/16 (30mm x 59mm) long and measures 1-3/8 (35mm) from muff...

With corrugated tips and spot-welded joint.Overall length is 5 in. (127mm).Image(s) are representative of the product group and not necessarily the individual product.

Fitting on 5/8 in. (16mm) support rods or smaller, this stamped steel clamp is plated for corrosion resistance and has a steel thumbscrew. The clamp is 9 in. (229mm) long by 3 in. (76mm) wide with a center distance 7-1/4 in. (184mm) between burettes. The...

Steel, nickel-plated (with wood mounting screw)Image(s) are representative of the product group and not necessarily the individual product.

S/J Joint ClampsImage(s) are representative of the product group and not necessarily the individual product.

This clamp is constructed from hardwood with a smooth finish and self-closing spring. The clamp will accept tubes up to 3/4 in. (19mm) in diameter. Overall length is 7 in. (178mm).Image(s) are representative of the product group and not necessarily the...

Manufactured from heavy die-cast aluminum, this clamp is designed for clamping two pieces of apparatus into any of the three following positions: right angles, parallel, or vertically. The clamp will accommodate attachments up to 1/2(13mm) in diameter...

This unit clamps to any horizontal or vertical support rod up to 3/4 in. (19 mm) in diameter. The clamp is designed to hold three pendulums spaced 2-1/8 in. (54 mm) apart with points for suspending cords on the same horizontal line, each individually...

The Table Clamp is designed to support meter sticks and other round or square rods, either vertically or horizontally up to 1 in. (25 mm) thick. The Vees are milled at right angles and the clamp can be mounted on table edges up to 1-3/4 in. (45 mm) thick...

These Rod Clamps are otherwise known as the muff portion only and can be used to create custom clamps to satisfy a wide range of clamping applications.Image(s) are representative of the product group and not necessarily the individual product.

Universal Extension Clamp with Swivel Jaws of stamped steel; forged steel handle, 3/8 in. dia. with Plastisol-coated Jaws. For Condensers and irregular shapes. • Plastic-covered jaws hold beakers and flasks firmly at any angle at a variable...

For clamping flask necks, condensers, etc. up to 11 cm diameter.Image(s) are representative of the product group and not necessarily the individual product.

An easy to use Spherical Joint positive closure clamp made of tough, color coded plastic for use with ball and socket joints. Clamp will not scratch glass and can be autoclaved to 200°C. This clamp has good chemical resistance at a lower cost than...

For flexible tubing. Nickel-plated steel wire.Image(s) are representative of the product group and not necessarily the individual product.Description: MediumJaw Opening in. (mm): 1/2 (13)Description: SmallJaw Opening in. (mm): 3/8 (10)Description:...

Designed to securely hold laboratory glassware and apparatus. Extension arm attaches clamp head securely and offers easy positioning in the deepest fume hoods. Clamps are constructed with round extension arms, which allow the clamps to be rotated...