SUPPORTS

This open-sided stainless steel bosshead accepts rods up to 13 mm (1/2) diameter. • Holds rods at right angles to one another• Secures rods with flat wing-head clamping screwsImage(s) are representative of the product group and not...

Two hex nuts fasten the 7.9mm (5/16 in.) diameter rod to the base. Offset rod mounting to the 20.8cm (8 3/16 in.) diameter leaves area for larger containers. Use with temperatures from 135°C to -135°C (275°F to -211°F). Simple assembly...

Securely holds as many as eight chromatography columns up to 30 mm (13/16 in.) in diameter in or between its flexible loops. • Rigid plastic back is mounted on two polyethylene support blocks which slide over support stand rods• Tighten the...

Cradles and safely holds flasks of any size up to 10 liters in stepped concentric rings. Supports are stackable, allowing for a stable base at various heights. Polypropylene. Steam autoclavable at 121°C (250°F).Image(s) are representative of the...

The hold of the ring allows the beaker to remain immersed in water, provides a low center of gravity and permits water to circulate underneath the beaker. Designed to firmly locate beaker or flask in water bath, • allowing water to circulate...

Excellent for use in severe corrosive conditions, this heavy-duty support stand is made of polypropylene plastic and metal, yet has no exposed metal parts. Measuring 21.5 x 40.5 x 5 cm (8.5 x 16 x 13/4 in.), the base has a smooth surface for easy...

Boekel extends their size offering for their Lab Jack product line. Three new sizes have been added to their existing product line. All stainless steel screw mechanism and anodized aluminum top and bottom plates. Three sizes have a pre-tapped hole to...

Economical support jacks combine solid construction wtih stainless steel lift mechanisms with POM rollers for long life, with anodized aluminum decks for economy. The height adjustment handwheel is made of phenolic resin. Their rugged construction also...

Space constraints in the modern laboratory fume hood can be quite restrictive, often making it cumbersome to adjust the height of equipment.. The new electric Lift 240 from BOCHEM has an integrated motor and control system inside the support jack for...

BrandTech Scientific BOCHEM Support Jacks constructed entirely of corrosion-resistant 304 stainless steel. The stainless lift mechanism with POM rollers provide long service life even in corrosive conditions. Jacks are autoclavable and are resistant to...

These support jacks combine a solid stainless steel lift mechanism with POM rollers with durable epoxy powder coated aluminum decks for economy and long life. The height adjustment handwheel is made of phenoic resin. Their solid construction provides...

Enables safe, smooth, and easy height adjustments of 30 x 30 cm and 40 x 40 cm Support Jacks. Features a 1 x 1 cm box wrench design to conveniently lock onto exposed end of the spindle. No disassembly of the handwheel or lift mechanism required. Image(s)...

This heavy white polyethylene resistant burette retort stand weighs 5.5 lbs. It comes with a polyethylene coated metal rod which screws into the base. Available with the hole in the center or at the short edge. Azlon burette clamps available separately...

Plated for corrosion resistance. Attaches to support rods up to 3/4 in. (19mm) in diameter. Distance from center of ring to center of clamp: 4-1/4 in. (108mm). Support Ring (with cut-out)This support ring features a cutout area in the ring that permits...

Designed to allow users to mount rod vertically or horizontally. The clamp is cast iron with a black enamel finish.Image(s) are representative of the product group and not necessarily the individual product.Rod: 1/2 x 24 in.Thread: 1/2 in.-13Rod: 1/2 x...

The Hoffman Type Electrolytic Support is used with associated glassware to demonstrate the electrolytic decomposition of water, hydrochloric acid, and other solutions. The unit consists of a cast iron base with insulated binding posts, support rod, one...

Shank of Extension Ring clamps to support rods with clamp holder. Manufactured from steel wire, zinc-plated for corrosion resistance.Image(s) are representative of the product group and not necessarily the individual product.

This highly stable jack can be adjusted to any height between 2-1/2 in. to 10 in. (64mm to 254mm). The jack will accept loads up to 10 lbs. (45.4 kg). The unit is constructed of aluminum top and bottom plates with a baked-enamel finish and plated steel...

The Humboldt Ring Burner features an improved design that puts the guide pins on the inside circumference so that the burner remains equidistant around the still. A Fletcher attachment regulates the gas and air. The overall shank length is 11 in...

The Support Shelf is manufactured from durable cast iron with a raised rim. The shelf diameter is 5 in. (127mm) and has a 5/16 in. thumbscrew in the muff. The unit has a black powder-coated finish.Image(s) are representative of the product group and not...

Designed to attach to a tabletop or inverted into a recessed hole for flush mounting. Models are available with either a threaded hole completely through the center or with an unthreaded thru-hole. These die-cast units are supplied without rod.Image(s)...

Sturdy Tripods featuring adjustable openings through the use of detachable rings. 9 in. legs.Image(s) are representative of the product group and not necessarily the individual product.

Wire Support Rings are formed as a bright basic wire circle to shank ( except 2 in. size). Made from aluminum muff and attaches to support rods up to 3/4 in. (19 mm) in diameter.Image(s) are representative of the product group and not necessarily the...

The Clamp and Support Rod is highly versatile, the rod height can be locked into any position by a simple thumbscrew located on the outer edge of the clamp. The clamp features a sturdy handle for tightening the unit on the edge of a table top up to 1-1/2...

Humboldt Support Stands feature a powder-coated finish and either a stamped steel or cast iron base with plated steel rod.Image(s) are representative of the product group and not necessarily the individual product.Base Size: 3-1/4 in.Rod Diameter x...

IKA lab lifts are suitable for raising and supporting small laboratory devices or vessels. The maximum weight that can be raised is up to 7 kg (max. dynamic load) and the maximum supporting weight is up to 25 kg (max. static load). The working height can...

Ideal for creating an adjustable support stand for mounting various items such as thermometer clamps, temperature probes, flask and column clamps. This kit allows you to mount a 17 in. threaded vertical support rod to the upper deck of a 152 x 152 mm,...

Center-less ground for a precise fit. These hard aluminum rods provide a smooth fit with lab-frames. Corrosion resistant with chamfered ends for easy location. 13 mm Diameter.Image(s) are representative of the product group and not necessarily the...

Providing Secure Support for Holding Glassware at Elevated Positions.Image(s) are representative of the product group and not necessarily the individual product.

Aluminum Lab-Lifts provide stable height adjustment for various items in the lab such as flasks, baths, and small equipment. Top and bottom decks are constructed of anodized aluminum. Internal supports and drive screws are constructed of stainless steel...

Lab-frame kits include all components necessary to build a lab-frame. Provides secure support for holding glassware at elevated positions. Extra-Large Lab-Frames: Versatile, adaptable Extra-Large Lab-Frame measures 48 x 72 in. (1219 x 1829 mm) and may...

Choose from four kits specifically designed to fit within laboratory fume hoods. All components are constructed of stainless steel with the exception of the Frame Connectors which are made of aluminum with a silicon finish.4 ft. Components:• (8) 51...

These Heavy-Duty, Stainless Steel Lab-Lifts are ultra-stable lifting platforms with exceptional strength and durability. Constructed of stainless steel, Lab-Lifts are designed for use in extreme environments and high load applications. Equipped with...

Lab-frame kits include all components necessary to build a lab-frame. Provides secure support for holding glassware at elevated positions. Heavy-Duty Lab-Frames: Floor mounted, free-standing unit is specifically designed for heavy-duty work such as pilot...

Heavy-Duty Support Stands have a four point cast iron base with stainless steel support rod. They are designed to accommodate vessels up to 30.5 cm in diameter to sit close to the support rod. They have rubber cushions on each of the four corners. The...

Lab-frame kits include all components necessary to build a lab-frame. Provides secure support for holding glassware at elevated positions. Large Lab-Frames: This 48 x 48 in. (1219 x 1219 mm) frame is ideal for complex glassware set-ups. Base is 18 in...

Lab-frame kits include all components necessary to build a lab-frame. Provides secure support for holding glassware at elevated positions. Medium Lab-Frames: Horizontal or vertical mounting, convenient for distillation or general set-up. Frame measures...

The PVC coated stand has a flat bottom support so it cant ride up on the cylinder. Includes an adjustable 1 in. (25 mm) wide, 54 in. (1372 mm) long nylon strap with nickel-plated, non-slip spring catch and buckle for fast, easy adjustment to keep the...

This cast aluminum stand hinges open and has 4 thumbscrews to tightly grip cylinders from 8 to 9 in. (203 to 229 mm) in diameter.Specifications• Dimensions (Diameter x H): 18.25 x 6 in. (464 x 152 mm)• Cylinder Diameter: 8 to 9 in. (203 x 229...

Heavy-duty, cast aluminum stand with adjustable L brackets hold cylinders from 6 to 9.25 in. (152 to 235 mm) in diameter. Hinges open for installation without lifting the cylinder or disturbing connections. Prevents accidental tipping. Hinges open for...