TEST TUBE

A versatile rack with pins for support or draining. Tubes can be stored upright, full or empty, or inverted over pins for draining. Steam autoclavable at 250°F (121°C).Image(s) are representative of the product group and not necessarily the...

Process a wide range of sample sizes needed to move from one part of a procedure to the next. Each tube is angled on the rack to increase the sample surface area. This gives more thorough mixing action without increasing rotational speed. Just one...

Half-racks save both water bath and fume hood space. Dimensions (L x W x H) in. (mm): 5.08 x 4.15 x 2.83 (128 x 105 x 72). Autoclavable polypropylene.Image(s) are representative of the product group and not necessarily the individual product.For Tube...

A great alternative to wire racks, these are molded of a special blend of autoclavable polypropylene. They will sink in a water bath and maintain their stability even in agitated water. Each rack features end plates for labeling as well as numbered and...

Ideal for rinsing, transporting and storing test tubes and other glassware. Steam autoclavable at 250°F (121°C).Image(s) are representative of the product group and not necessarily the individual product.Basket OnlyBasket with LidDim. L x W x D...

Great for decanting and for water bath work. Four retainer fingers in the two plates of the rack hold tubes firmly in any position without dislodging while pouring. The racks are molded from a special blend of autoclavable polypropylene that is heavier...

Epoxy-coated steel wire rack holds 15 conical bottom 15 mL centrifuge tubes. The racka is generaously spaced for easy handling. Top and middle sections have 18 mm square holes and are centered over rails in the base that holds the tips of the tubes...

Made of steam autoclavable, epoxy-coated steel wire. These racks hold 50 ml plastic centrifuge tubes in holes 30 mm square.Image(s) are representative of the product group and not necessarily the individual product.Dim. L x W x H in. (mm): 57/8 x 3 x...

Chemical- and corrosion-resistant steel wire racks have an epoxy coating for resistance to organic solvents, salts, weak acids and alkalies. This coating will withstand temperatures from -369° to 250°F (-223° to 121°C) and can be...

Excellent space-savers for use in water baths, under fume hoods and any other place where space is limited. Epoxy-coated racks.Image(s) are representative of the product group and not necessarily the individual product.For Tube Size (mm): 10 to 13No. of...

The durable and smooth coating is impervious to organic solvents, salts, weak acids and weak alkalis.• Extra long rack has more wells for high volume processing and storage• Epoxy coated steel wire racks are chemical and corrosion...

These sturdy, rigid racks feature interlocking end plates for secure stacking when loaded with tubes up to 4 in. (10 cm) long. The end plates have handles and rows that are numbered and lettered for tube identification. Polypropylene racks are...

Molded of a special blend of polypropylene that is heavier than water, these racks sink to the bottom of the bath and will not tip over. • All racks are 21.3 x 11 cm (83/8 x 45/16 in.)• Steam autoclavable at 121°C (250°F)Image(s) are...

Colors stand out against the white surfaces of this polypropylene rack making color comparison tests easier to read. • Useful for drying or storing test tubes• Holds six, 25 mm or eight, 18 mm tubes; includes six drying pins• Steam...

Efficiently prepare agar media slants with this test tube slant rack. Choose from 13-16 mm or 16-20 mm tube openings in 40 numbered and lettered places. Not stackable. Turning the rack to one side will slant tubes 5°; produces a large surface area...

Available in two sizes to accommodate tubes, vials, serological tubes and reagent containers, these polyethylene racks both include 5 pins for drying tubes upside down. Tubes not included.• 12 wells rack has 20.6 mm diameter holes for 16 to 20 mm...

This versatile blood collection tray carries all you need from the lab to your patient, and can be rearranged to meet your specific needs. Includes two, 40-place test tube racks for tubes up to 16mm O.D., one 18-place slide holder, a large requisition...

This polypropylene rack holds 143 vacuum-type syringe tubes: 80 tubes 12.7 mm (1/2 in.) O.D. and 63 tubes 16 mm (5/8 in.) O.D. up to 102 mm (4 in.) long. Tubes are suspended in channels by colored stoppers providing instant visual identification. One or...

These polypropylene serum vial racks are chemical resistant and steam autoclavable. Racks fit most water baths for elevated temperature incubations. End plates have hand holes for safe transport. Top shelf height is 41 mm (1-5/8 in.).Image(s) are...

This simple rack has 6 holes of 25 mm diameter and its shape ensures good visibility making it ideal for classroom work. There are six drying pegs on the front of the stand which is supplied flat and is very easy to assemble for use or dissemble for...

Lightweight, unbreakable test tube rack is molded of high density polyethylene. Plastic test tube rack will withstand temperatures up to 110° C. Three-tier racks have legs to raise them from table. Excellent chemical resistance.Image(s) are...

These racks for tubes up to 20 mm provide excellent stability with no tendency to float or move in circulating water baths. An alpha numeric grid reference on the top tier enables precise location in the rack of particular samples. Available in three...

Scintillation Vial rack is welded polypropylene rack holds the included 100 standard 20 mL scintillation vials (Cat. No 151-17063). Scintillation Vial Rack is autoclavable and resists both nitric and hydrochloric acids. Hole diameter: 1 1/16 in...

Plastic test tube racks are molded of HDPE and can accommodate tubes in use as well as be used for drying.Image(s) are representative of the product group and not necessarily the individual product.No. of Places: 12Tube Size O.D. (mm): 18-20No. of...

Sturdy acrylic hybridization tube racks organize and store hybridization tubes before and after incubation. Hybridization Tube Racks are perfect for holding tubes during membrane preparation and filling with hybridization solutions.Image(s) are...

These traditional style test tube holders are lightweight, compact and unbreakable. They take up less space on the benchtop to provide a larger work area. They are produced from durable polypropylene (PP) and can be autoclaved at 121°C for 20 minutes...

This specially designed test tube rack features rubber grips that hold test tubes in place when decanting liquid. This rack features a unique tube ejector that allows the user to easily eject all tubes into a waste receptacle at once...

This specially designed test tube rack features rubber grips that hold test tubes in place when decanting liquid.Specifications• Produced from Polyoxymethylene (POM)• Holds various size tubes up to 17mm diameter. • Low profile design...

These specially shaped Z racks are rust proof and will hold up to repeated use. The wide base provides stability and prevents tipping. When not in use, the racks stack neatly inside one another to conserve benchtop space. Specifications• 25-place...

Globe Scientifics cardboard storage boxes are designed for the compact storage of sample tubes, cryogenic vials and centrifuge tubes in a temperature range of -196° to +121°C. They have a liquid resistant coating and are designed for use in...

• Fully autoclavable • Molded from reinforced nylon for strength and durability with no coatings to chip, peel, or rust • Single piece, three tier grid design for secure and stable racking of tubes • Good temperature and chemical...

• Fully autoclavable • Molded from reinforced nylon for strength and durability with no coatings to chip, peel, or rust • Single piece, three tier grid design for secure and stable racking of tubes • Good temperature and chemical...

• Fully autoclavable • Manufactured from durable reinforced polypropylene (PP) • Peg design allows easy viewing of tube contents • Can be used to dry inverted tubes while minimizing collection of airborne contaminants •...

• Fully autoclavable • Manufactured from durable reinforced polypropylene (PP) • Three tiered design holds tubes securely • Sturdy handles facilitate easy transport • 4 color options for organization of samples or benchtop...

• Link multiple racks together for a custom rack solution • Autoclavable polypropylene (PP) • Heavy-duty construction is durable and chemical resistant • Multiple colors available for benchtop organization at a glance •...

• Autoclavable polypropylene (PP) • Heavy-duty construction is durable and chemical resistant • Multiple colors available for benchtop organization at a glance • Versatile design accommodates different tube sizes on each side...

Chemically resistant epoxy-coated steel wire rack with slotted bottom for transport or sample handling. Supports capped tubes up to 18 mm diameter in a 3 x 5 array. Dimensions (L x W x H): 5 x 3 x 3 in. (12.7 x 7.6 x 7.6 cm). Autoclavable.Image(s) are...

Each slot of the Adapt-a-Rack adapts to accommodate 12 to 30 mm (5 to 50 mL) tubes sizes and holds them in a firm upright position. Made from POM with open sides for label viewing. Holds different sized tubes in each slot. Racks can be linked together...

Durable, chemically resistant epoxy-coated steel wire racks for transport or sample handling. Suitable for conical, round or flat bottom glass or plastic tubes and bottles. Rack is suitable for Bijou bottles and low profile tubes up to 25 mm diameter...

Chain Rack is a customizable tube rack with multiple configurations for 5 mL/15 mL and 15 to 17 mm tubes. Configure this tube rack to meet your requirements instead of the other way around. The Chain Rack has a unique linkable design that enables the...