GENERAL PURPOSE

Heavy-duty funnel is molded in one piece, 6.35 mm (1/4 in.) thick. The top cylindrical section is 36 cm OD x 13 cm high (15 x 5 in.) with a 2.54 mm (1 in.) wide top flange. The 45 degree cone is 11 cm (41/2 in.) high and a 14 cm (51/2 in.) long stem...

Heavy-duty funnels have smooth walls, 60° cone angle and long stem. External ribs prevent air lock. Steam autoclavable at 121°C (250°F).Image(s) are representative of the product group and not necessarily the individual product.Top ID (mm):...

Reduces difficulties in handling narrow dialysis bags. Dialysis tubing is cut to length and knotted at the end. The other end is slipped onto the tube and held with Silicone Rubber Loops (Cat. No. 154-17401), or a rubber band. • Three tube steps...

These plain reusable plastic funnels are short stem and made of polypropylene.Image(s) are representative of the product group and not necessarily the individual product.Diameter mm: 30Stem O.D. (mm): 1.5Stem Length (mm): 25Height (mm): 45Diameter mm:...

• Very smooth internal non-stick finish• Use with liquids or granular solids• Totally inert and non-contaminating Dynalon Fluoropolymer products utilize pure virgin PTFE with a temperature range of -200 DEG C to +280 DEG C. Chemically...

These funnels are ideal for many applications in the laboratory and industry. Upper portion of funnel is straight sided, helps prevent spill-over. Maximum temperature HDPE is 110°C.Image(s) are representative of the product group and not necessarily...

Plastic 1 oz Mini-Funnel has numerous lab and industrial applications. Molded of autoclavable polypropylene. Mini-funnel is ideal for micro work, filling small containers & bottles, burettes, etc.Image(s) are representative of the product group and not...

Plastic anti-splash ring eliminates spilling of liquids caused by the swirling action created when a liquid is poured into a funnel. Anti-splash funnel is supplied with an attached 100 mesh filter and available in both 24 and 144 ounce capacities...

Plastic utility funnels are inexpensive, lightweight and designed for general use. They are made of polypropylene and high density polyethylene depending on the size. The 162 mm size (Cat No. 961-31202) has a very large throat opening.Image(s) are...

These economical disposable funnels are available in either transparent polystyrene or translucent polypropylene. They are lightweight, have reinforced rims and inside fluting. They are tapered at a 60 DEG angle.Available in 55 mm and 65 mm widths...

ESR: Piercing Funnel for Sedi-Rate SystemImage(s) are representative of the product group and not necessarily the individual product.

These tough, high density polyethylene (HDPE) general purpose funnels are suitable for use with a wide range of liquids. External ribbing is molded into the funnels to prevent air lock. The funnels feature straight sided upper rims to help prevent...

The Disposaflex Disposable Polypropylene Column is an inexpensive, multi-purpose column designed to satisfy a wide range of analytical separations using aqueous buffers. The disposable feature eliminates the possibility of cross contamination when using...

This chemically inert, non-contaminating funnel is useful in semiconductor and electronic labs, environmental analysis and biotechnology. Nonstick surface reduces residual material left in funnel. The low surface energy of PTFE facilitates quantitative...

Easy-to-see, bright red funnel is designed for delivering liquids into hard-to-reach areas with minimal mess and effort. Features anti-slop inward flange and large, strong handle. Fine-mesh, bronze filter screen at top of stem; 51 mm (2 in.) diameter...

Make additions to burettes and narrow neck containers easily with this flared top thistle tube. Polypropylene plastic; chemical resistant, unbreakable, safe. Steam autoclavable at 121°C (250°F) Dimensions: 27 mm (1-1/16 in.) I.D. top with a 41 mm...

Temporarily contain waste on the benchtop or under the lab hood using Thermo Scientific™ Nalgene™ Safety Waste Funnel Systems. Funnels feature the Easy Snap Safety Latch to minimize spillage if accidentally tipped over and a larger diameter...

Numerous lab applications. The three smaller sizes are molded of autoclavable polypropylene; the three larger sizes are high-density polyethylene (non-autoclavable). Catalog no. 967-13657 has a large throat opening for faster transfer of materials...