ACCESSORIES

Stop wasting time hunting for the right tubing connection. This generous assortment of 72 plastic fittings has everything you need for routine laboratory set-ups.• Clear, hinge-top, polystyrene storage box makes it easy to find what you need•...

This handy metric diameter gauge will end doubt about inside or outside diameters. • Measures glass and plastic tubing, connecting pieces, rods, test tubes, etc. between 1.5 and 16 mm• Holes on one side measure O.D.; pins on the other side...

To create a fluid dispensing system, insert the Pinch Valve (identical in function to the Bobbit Valve) into any tubing. Squeeze the soft silicone body of the valve to regulate flow. Components are PTFE, stainless steel and polypropylene for maximum.....

Portable, pocket-sized cutter cuts flexible tubing from 1/16 to 3/4 in. (1.6 to 19 mm) OD. The jaw is lightly spring-loaded and closes automatically for safety. The replaceable hardened steel blade makes clean, straight cuts. 3 in. (76 mm) long.Image(s)...

Acetal Tubing Clamps will not distort, rust or corrode. Select clamp for desired tubing size.• (A) Mini Acetal Clamp: Single position on/off clamp gives positive shutoff with fingertip control. Use for thin-walled tubing under 4.7 mm (3/16 in.) O.D...

Polycarbonate clip holds flexible tubing in beakers, pitchers, etc. Fits securely onto the edge and has a 2 in. (51 mm) long arm with a hole to accept tubing up to 3/8 in. (9.5 mm) OD. May be autoclaved.Image(s) are representative of the product group...

A needle type, PTFE O-ring seal inside this polyethylene faucet prevents back pressure liquid from escaping through the operating knob. Outlet accepts 16 mm I.D. (5/8 in.) tubing.• Cat. No. 964-18316 fits standard steel drums• Cat. No...

Ensure one-way directional flow in vacuum lines with these polyethylene plastic check valves.• Operate positively; instantly blocks flow if direction changes• Built-in arrows indicate direction of free flow• Neoprene disk, no...

• PTFE sinkers keep tubing at the bottom of your container• Ideal for use with pumps and dispensers• Hose barb ends for simple tubing connection• Solvent resistant; autoclavable• Sold as set of two sizes (Cat. No. 154-18376)...

Dura-clamp is easily operated with one hand. One piece plastic construction. Dura-clamp will not rust or corrode.Image(s) are representative of the product group and not necessarily the individual product.Material: PolypropyleneAccepts Tubing O.D.: 1/8...

Plastic tubing check valve prevents the Reverse flow of the liquid when the pressure is interrupted. Useful for any tubing system on vacuum line.Regular check valve size valve will fit tubing 8-9-10 mm (1/4 in. to 3/8 in.) diameter depending on...

The 1/8 in. MNPT HB Plug Pack is the replacement fittings for EZwaste® Solvent Waste Systems fittings. These plugs provide a closed system necessary to prevent spills. The EZwaste® Solvent Waste System is designed to be an affordable solution...

The 1/8 in. MNPT x 1/4 in. HB fittings Pack is the replacement fittings for EZwaste Solvent Waste Systems fittings. These tube fittings secure waste tubes to carboy providing the closed system necessary to prevent spills. The EZwaste® Solvent Waste...

The 1/8 in. MNPT x 3/8 in. Hose Barb fittings Pack is the replacement fittings for EZwaste® Solvent Waste Systems fittings. These tube fittings secure waste tubes to carboy providing the closed system necessary to prevent spills. The EZwaste®...

The 1/2-20 in. Plugs Pack is the replacement fittings for EZwaste Solvent Waste Systems fittings. It is used to cover any unused 1/4 in. ports. These plugs provide closed system necessary to prevent spills. The EZwaste® Solvent Waste System is...

The 1/4 in. O.D. MNPT Filter Plugs Pack is the replacement fittings for EZwaste Solvent Waste Systems fittings. These plugs provide a closed system necessary to prevent spills. The EZwaste® Solvent Waste System is designed to be an affordable...

The 1/16 in. O.D. Tube Fittings Pack is the replacement fittings for EZwaste® Solvent Waste Systems fittings. It includes 30 Male-nut fittings and 30 Ferrule fittings for 1/16 in. O.D. Tubing. These tube fittings secure waste tubes to carboy...

The 1/4-28 in. Plugs Pack is the replacement fittings for EZwaste® Solvent Waste Systems fittings. It is used to cover any unused 1/8 in. ports. These plugs provide closed system necessary to prevent spills. The EZwaste® Solvent Waste System is...

The 1/8 in. O.D. Tube Fittings Pack is the replacement fittings for EZwaste® Solvent Waste Systems fittings. It includes 6 Male-nut fittings and 6 Ferrule fittings for 1/8 in. O.D. Tubing. These tube fittings secure waste tubes to carboy providing...

The 1/4 in. O.D. Tube Fittings Pack is the replacement fittings for EZwaste® Solvent Waste Systems fittings. These tube fittings secure waste tubes to carboy providing the closed system necessary to prevent spills. The EZwaste® Solvent Waste...

The 1/16 in. O.D. Tube Fittings Pack is the replacement fittings for EZwaste® Solvent Waste Systems fittings. It includes 6 Male-nut fittings and 6 Ferrule fittings for 1/16 in. O.D. Tubing. These tube fittings secure waste tubes to carboy providing...

The UN/DOT Filter Kit, VersaCap® 51S EZwaste® Solvent Waste System is designed to be an affordable solution for HPLC liquid waste disposal. Each system is manufactured to safely collect waste from two HPLC machines. This system features an...

Foxx Life Sciences Vactrap is the worlds most advanced vacuum trap system. Ideal for protection of vacuum lines and scientists alike, Vactrap safely contains waste from supernatant removal, chemical separation, and cell or tissue culture media aspiration...

Spring-loaded to stay open until used. Cuts tubing up to 38 mm (1.5 in.) diameter. Made of nickel-plated zinc-alloy die-casting. Replacement wheels made of hardened steel.Image(s) are representative of the product group and not necessarily the individual...

ISE Tubing Kit, for use with Cobas Mira, Mira S, Mira Plus and Horiba ABX analyzersImage(s) are representative of the product group and not necessarily the individual product.

Hamilton Company pre-made flanged tubing assemblies. The assemblies are made with PTFE tubing and Kel-F threaded fittings. The flanged tubing assemblies provide the perfect seal with 1/4-28 flat bottom valve ports.Image(s) are representative of the...

Hamilton Company pre-made flanged tubing assemblies. The assemblies are made with PTFE tubing and Kel-F threaded fittings. The flanged tubing assemblies provide the perfect seal with 1/4-28 flat bottom valve ports.Image(s) are representative of the...

Use when trace presence of sulfide or heavy metal preservations will interfere with subsequent analysis of dialysate or retentate. Choose heavy metals cleaning solution or sulfide removal kit depending on the type of membrane you use. 8 oz. size.Image(s)...

For liquid flow from 50 ml/min. in horizontal position, and 140 ml/min. in vertical position. Minimum air flow 3 litres/min. horizontal and 8 litres/min. vertical. Speed of rotation of ball proportional to flow. Not to be used with corrosive fluids...

Polyethylene drying tubes are ideal for drying gases. The two ends have push - on tapered connections to take rubber of 8.9.10 mm diameters.Image(s) are representative of the product group and not necessarily the individual product.Length (mm): 100